Top 6000psi Ball Valve Reviews

Alomejor CGA347 Paintball Fill Station Kit PCP SCBA Fill Station Charging Adapter with Hand Tight Paintball Refill Adapter

  • SMOOTH DESIGN: This paintball fill station Knob type exhaust valve, the air outlet is very smooth, which is safe to use and premium for long service time..
  • 45MM DIAMETER: The 45mm diameter glycerine filling gauge, reading 0~ 40mpa, 0~6000 PSI, indicates that it is very suitable for outdoor use..
  • UNIQUE DESIGN: 6000psi fill station designed for filling a paintball HPA tank, or an air rifle from a SCBA (fire fighting) tank..
  • APPLY FOR: Easy to install and use. The paintball charging adapter is connected to the SCBA (fire fighting) tank using tight CGA347 nuts and threaded joints..
Check Stock

EZ-FLUID 1-1/2 NPT Female Threaded IPS Ball Valve Full Port Water Stop Shut Off,Heavy Duty Lead Free Brass,Quarter Turn,Blue Handle 1-Pack

  • 1-1/2" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
  • Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
  • 1-1/2" NPT Threaded IPS Lead Free Brass Water Cut off Ball Valve.
  • Size: 1-1/2" NPT IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
  • IAPMO Listed to cUPC - Certified to NSF 61-G - "Lead-Free" Compliant.
Check Stock

PVC COMPACT BALL VALVE 4" - Socket - Sanipro

  • EZ-FLO SCHEDULE 40 PVC BALL VALVE: This EZ-FLO ball valve is suitable for use as an inline valve for connecting two pipes going in the same direction.
  • equipped with a 3/4 inch slip connection on each end.
  • DURABLE: This schedule 40 PVC ball valve is made of heavy-duty CPVC that protects against corrosion and provides strength and durability.
  • EASY TO USE: This PVC ball valve is equipped with a quarter-turn red plastic handle for an easy-to-control water flow.
  • SPECS: This valve can withstand a working pressure of 150 PSI and a maximum temperature of 140 degrees F.
  • SAFETY: This ball valve complies with lead-free guidelines for potable water applications.
Check Stock

True Union Ball Valve 1-1/2" with Full Port (2-Pack), UPVC Full Flow Ball Valve - U.S. ASTM EPDM O-Rings and Reversible PTFE Seats, Rated at 230 PSI

  • Higher PSI - Sealed with higher quality ASTM EPDM O-Rings and engineering plastic powder. So our ball valve can withstand a higher pressure(230 PSI) than general products(150-200 PSI)..
  • High Cost Performance: Pack of 2 full flow ball valve are highly cost-effective, and this premium ball valve can be used for many years, reduce your post-maintenance costs..
  • Full Port - The best full flow ball valve for your water project. Provide excellent performance in water engineering, pipeline facilities, agricultural irrigation, swimming pool and other commercial pipeline systems..
  • Easy to Operate and Install - The smooth inner sphere makes the handle easy to rotate. Perfect match with PVC pipe 1 1/2 inch Sch40. standard..
  • Perfect Sale After Service - We provide online service at any time. If there is any problem with the product, we can return or exchange the goods unconditionally or refund your full amount..
Check Stock

Nipple, 2 X 6 In

  • Price For: Each Stem Type: Blowout Proof Seat Material: PTFE Standards: UL, CSA Body Material: Brass Ball Valve Basic Body Material: Brass Port: Full Ball Valve Product Group: Manual Valve Structure: 2-Piece Handle Material: Steel with Corrosion Resistant Plating Item: Ball Valve Body Style: Inline Ball Material: Chrome Plated Brass Handle Type: Lever.
  • Temp. Range: 0 Degrees to 400 Degrees F Stem Material: Brass Max. Pressure: 600 psi CWP Pipe Size: 1/2" Tube Size: 1/2" Connection Type: Sweat x Sweat Features: General Purpose Country of Origin (subject to change): China.
Check Stock

Malida 1/4" Tube Float Valve Kit for RO Water Reverse Osmosis System water filter Push to Connect Pipe Hose Tube Fittings

  • The Aquatic Life Float Valve Kit allows you to fill large tanks.
  • 1/4″ Tube Float Valve Kit Connects to Faucet.
  • Minimum Operating Pressure: 40 PSI,Maximum Operating Pressure: 80 PSI.
  • Contains: 3 meters tubing, PVC ball float 1 pcs, all around valve 1pcs, manual ball valve 1 pcs,One check valve 1 pcs.
  • RO Water Reverse Osmosis System water filter Push to Connect Pipe Hose Tube Fittings.
Check Stock

DERNORD 1PC Type Stainless Steel Ball Valve 0.5 NPT Standard Port for Water Oil and Gas

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinly insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need....
Check Stock

LubriMatic 30-114 Continuous Flow Air Operated Grease Gun

  • Continuously pumps grease while trigger is depressed.
  • 2-way loading: 14 oz. cartridge or suction load.
  • Head cap port for adding air bleeder valve or bulk loader fitting.
  • Capable of 3-way loading: 14 ounce cartridge bulk or suction.
  • Recommended inlet pressure 90 PSI and dispenses 5 ounces per minute.
Check Stock

DERNORD Stainless Steel Ball Valve 1PC Type 0.25\ NPT Standard Port for Water, Oil, and Gas (1/4 Inch Ball Valve)

  • Serviceable Stainless Steel Ball Valve - Can be taken apart via threads, Threaded Connector Type Female to Female 1/4 Inch NPT.
  • Stainless Steel 1PC Ball Valve Handle: Handle with blue vinyl insulation.
  • Body & Ball Type:304 Stainless Steel.Temp Range:-60 F to 450 F.
  • Stainless Steel 1PC Ball Valve Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas,.
  • NOTE: DERNORD 1PC Type Ball Valve Standard Port is not full port type, the size we marked is only the thread size this ball valve fits. If you need full-bore ball valve, please check the related products in Product Description..
Check Stock

MaxLine RapidAir M8040 1' In Line Ball Valve For 1 Inch Max Line Air Tubing

  • This is a Maxline Part Number M8040 - 1" in-line shut off ball valve for Rapidair MaxLine 1" tubing..
  • This is a solid brass valve that is nickel plated to resist corrosion..
  • This ball valve has a 175 PSI max working pressure and features a double o-ring sealed compression style fittings on each end specifically designed to be used only with the 1" MaxLine air system tubing..
Check Stock

Ultimate Washer UW11-PWABV038 Power Washer Ball Valve Kit 3/8-Inch Male Plug X 3/8-Inch Female Quick Connect, 3000 PSI for High Pressure Hoses

  • Carbon steel ball valve kit designed for high-pressure hoses..
  • Switch wands, tips, or hoses quickly and easily..
  • Valve is easy to turn and provides good leverage under high pressure..
  • Inlet: 3/8 in. Male Quick Connect Plug — Valve: 3/8 in. High-Pressure Ball Valve.
  • Outlet: 3/8 in. Female Quick Connect — Max PSI: 3,000 PSI.
Check Stock

Raptor Blast High Pressure Ball Valve Kit 3/8' Male Plug X 3/8' Female Quick Connect 7250 PSI for High Pressure Hoses (Packs)

  • High-pressure ball valve has a 3/8 in. male plug and a 3/8 in. female quick connector.
  • Zinc-plated ball valve kit designed for high-pressure hoses..
  • Valve is easy to turn and provides good leverage under high pressure..
Check Stock

TOKHAROI 1/4’’ Quick Connect Inch Pressure Washer Ball Valve Kit, Carbon Steel Valve for Pressure Washer Hose, 4000 PSI

  • The ball valve kit is designed for high-pressure hoses.High pressure ball valve has 1/4’’ quick connector and 1/4’’ quick connect plug. Easy to connect ball valve to gun, nozzle, pump and hose..
  • The steel pressure washing ball valve kit is designed for pressure washer hose..
  • The max working pressure is 4000 PSI. The max working temperature is 158 F..
  • The ball valve is easy to turn on and off. It offers great leverage under high pressure..
  • Quick Disconnect Fitting: 1/4’’ quick coupler plug + 1/4’’ male NPT thread.
Check Stock