Top 2 Flutes End Mills Reviews

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Check Stock

YG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.

Check Stock

YG1 E5G97911 | 1/4x1/4x5/8x2-1/2 AluPwr 3FL HP Carbide Corner Radius End Mill

Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

Check Stock

Niagara Cutter 17011737 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 30 Degree Helix, 6 Flutes, 3.25' Overall Length, 0.500' Cutting Diameter, 0.500' Shank Diameter

fewer flutes have more chip-carrying capacity and more flutes produce a finer finish.
Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Square nose end mills (also called square end) create sharp, unrounded cuts.
Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

Check Stock

YG-1 E5021 Carbide Square Nose End Mill, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2.5\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

Suitable for general-purpose machining on steel, chromium-nickel steel, and cast iron.
Four flutes produce a better finish than fewer flutes.
Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.
Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
Square nose end mills (also called square end) create sharp, unrounded cuts.

Check Stock

YG-1 E5023 Carbide Square Nose End Mill, Double End, TIALN Multilayer Finish, 30 Deg Helix, 4 Flutes, 2\ Overall Length, 0.140625\ Cutting Diameter, 0.1875\ Shank Diameter

Double-end square end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life.
Suitable for general-purpose machining on steel, chromium-nickel steel, and malleable cast iron.
Stub length increases the strength of the tool, making it less likely to break in the workpiece.
Four flutes produce a better finish than fewer flutes.
Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds, offering better heat resistance than uncoated finish, TiN coating, and TiCN coating.

Check Stock

Niagara Cutter C430R-0.375-D3-R030.0-Z4 C430R Carbide Radius End Mill TiAlN Finish 4 Flutes 3/8 Cutting Diameter 3/8 Shank Diameter 2-1/2 Overall Length 1

Corner radius end mills have cutting edges with rounded corners to reduce chipping and provide longer tool life.
Four flutes produce a better finish than fewer flutes.
Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures.
Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance at high cutting speeds.
Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling.

Check Stock

YG-1 E1237 High Speed Steel (HSS) Corner Rounding End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 4 Flutes, 3\ Overall Length, 1\ Cutting Diameter, 0.5\ Shank Diameter

Corner rounding end mills are designed to take the edge off sharp corners.
Four flutes produce a better finish than fewer flutes.
High-speed steel is compatible with a variety of materials.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Non-center-cutting design supports peripheral milling and finishing.

Check Stock

YG-1 E1237 High Speed Steel (HSS) Corner Rounding End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 4 Flutes, 3\ Overall Length, 0.625\ Cutting Diameter, 0.5\ Shank Diameter

Corner rounding end mills are designed to take the edge off sharp corners.
Four flutes produce a better finish than fewer flutes.
High-speed steel is compatible with a variety of materials.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Non-center-cutting design supports peripheral milling and finishing.

Check Stock

Ball Nose End Mill Assorted R0.75 Tip 1/8\ Tapered End Mill TiAlN Coated CNC Router Bits Carbide Bit CNC Cutter for Carving Engraving

[ Size ] Tip Radius: 0.75mm, Cutting Length: 9/16" (15mm), Shank Diameter: 1/8" (3mm), Full Length: 1 9/16" (40mm), 2 Flutes..
[ High Quality ] The end mills are made of top quality imported tungsten steel carbide that is very tough, resists wear and offers high cutting performance..
[ TiAIN coated Design ] TiAlN Coated for high hardness and heat resistance enables the tool has long life..
[ Applicable Materials ] The bits for CNC,Engraving machine.Plywood, hardwood, acrylic, Carbon steel,inconel, etc..
[ Package Including ] 1PCS R0.75 Tip Tapered angle Ball Nose End Mill / Cone Cutters, super design for carving and clearing edge..

Check Stock

YG-1 E2237 Cobalt Steel Corner Rounding End Mill, Weldon Shank, Uncoated (Bright) Finish, Non-Center Cutting, 4 Flutes, 2.5\ Overall Length, 0.4375\ Cutting Diameter, 0.375\ Shank Diameter

Corner rounding end mills are designed to take the edge off sharp corners.
Four flutes produce a better finish than fewer flutes.
Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel.
Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Non-center-cutting design supports peripheral milling and finishing.

Check Stock

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..

Check Stock