Top 2 Flutes Bits Reviews

AUTOTOOLHOME 3/8' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/8 in)

  • AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • Carbide milling bits Diameter: 3/8'', Shank Diameter: 3/8'', Flute length: 1'', Overall Length: 2-1/2", 4 Flutes.
  • This 1/4 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
  • End Mill spiral router bits are used for side milling, end milling, finish machining, etc..
  • Unequal flute spacing and irregular helix flutes ensures stable machining of difficult-to-cut materials and higher efficiency,Vibration absorption provides stability, high efficiency finishing and improved chip disposal.
Check Stock

MAGBIT 786.24.0816 MAG786 1/2-Inch by 24-Inch High Carbon Steel Bellhanger Drill Bit

  • 2 recesses provided to allow for extension set screws - bits 5/8-Inch and over.
  • Fish eye hole provided near tip of flutes to aid in pulling wire.
Check Stock

MAGBIT 786.24.0616 MAG786 3/8-Inch by 24-Inch High Carbon Steel Bellhanger Drill Bit

  • 2 recesses provided to allow for extension set screws - bits 5/8-Inch and over.
  • Fish eye hole provided near tip of flutes to aid in pulling wire.
Check Stock

MAGBIT 786.18.0316 MAG786 3/16-Inch by 18-Inch High Carbon Steel Bellhanger Drill Bit

  • 2 recesses provided to allow for extension set screws - bits 5/8-Inch and over.
  • Fish eye hole provided near tip of flutes to aid in pulling wire.
Check Stock

MAGBIT 786.30.0616 MAG786 3/8-Inch by 30-Inch High Carbon Steel Bellhanger Drill Bit

  • 2 recesses provided to allow for extension set screws - bits 5/8-Inch and over.
  • Fish eye hole provided near tip of flutes to aid in pulling wire.
Check Stock

MAGBIT 786.24.0416 MAG786 1/4-Inch by 24-Inch High Carbon Steel Bellhanger Drill Bit

  • 2 recesses provided to allow for extension set screws - bits 5/8-Inch and over.
  • Fish eye hole provided near tip of flutes to aid in pulling wire.
Check Stock

MAGBIT 786.18.0816 MAG786 1/2-Inch by 18-Inch High Carbon Steel Bellhanger Drill Bit

  • 2 recesses provided to allow for extension set screws - bits 5/8-Inch and over.
  • Fish eye hole provided near tip of flutes to aid in pulling wire.
Check Stock

Jerax tools 3/16 to 7/8 Inch Step Drill Bit M2 HSS Spiral Grooved Step Bit for Stainless Steel Metal Wood Plastic

  • [Non-stop]: Our Polished Steps and Size Highlights let you able to see target hole size during drilling. No need to stop in the middle of the drilling and check. Save you time and hassle..
  • [Easy & Fast]: With our high-accuracy CNC processing and optimized spiral design over the years, our spiral flutes design cuts EASY, FAST and CLEAN, outperforming the average ones on the market. Compared to the Straight flutes, the Spiral flutes guide the debris out faster by its nature, making the drilling smoother and creating fewer burrs for the holes. Once you've tried our spiral design, there's no way back to the straight design..
  • [Heavy duty]: Cuts holes on Stainless steel, Hardened Metal, Mild steel, Galvanized steel, Aluminum, Copper, Plastic, Wood, or anything that has similar or lower hardness as these materials. Up to 12ga /2.7mm thickness for Stainless steel..
  • [Multi Hole Sizes]: No need to buy a kit. This one step bit comes with 12 sizes so you can drill 12 different hole sizes, saving you time and effort to change bits. Marked sizes include: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8"..
Check Stock

End Mill Bits, HSS CNC End Mill Cutter for Wood, Aluminum, Steel, Titanium, Straight 4 Flute Mill Bit Set of 6（3mm,4mm,6mm,8mm,10mm,12mm）

  • 1.Four flutes produce a better finish than fewer flutes..
  • 3.One Set of end mill bits Including: 6 Different kinds of Size end mills to meet your need, 3mm, 4mm,6mm, 8mm,10mm,12mm.
  • 4.Hardness of metal for above HRC 45 degrees,with high bending resistance and abrasion resistance, exclusive to HIGH HARDNESS, HIGH SPEED CUTTING applications..
  • 5.End mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
Check Stock

Topline USA M42 Cobalt #44 Drill Bits 6-Pk

  • Jobber length bits designed for drilling stainless and hard steel, plastic and wood, Premium Swift Bore (Registered Trademark).
  • Hardened and tempered M2 high-speed steel bits fall between standard fractional drill sizes.
  • Precision ground, bright finish with polished flutes that increase chip ejection.
  • 135-degree split point for fast penetration and accurate starting with no center punch.
  • Wire Gauge Diameter: No. 44, Decimal Inches Equivalent: 0.0860, Tap Size: 4-36 NS, Overall Length: 2-1/8-inch.
Check Stock

Spetool 90 Degree Carbide V Bits with Tiain Coated 4 Flutes Chamfer End Mill for Caving V Groove and Sign

  • Chamfer End Mill With 90 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC,X Carve,Router hand and Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock

SpeTool Carbide Chamfer End Mill V Groove Router Bit 60 Degree, 4 Flutes 1/4 inch Shank for CNC Carving and Chamfering

  • Chamfer End Mill With 60 Degree, 1/4" Shank Diameter, 2" Overall Length..
  • The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End..
  • 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface..
  • Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55..
  • V Groove Router Bits Can Be Used in CNC, X carve, 3D carving, Router Hand And Table Mount, And Most Brand Handheld Routers with 1/4 Inch Collets..
Check Stock

HQMaster CNC Router Bit 1/8” Shank Ball Nose End Mill Titanium Coated Spiral Milling Cutter Cutting Diameter 1/1.5/2/2.5/3.175mm Engraving Carving Tool Set Tungsten Steel for MDF Acrylic Wood PVC 10Pcs

  • PACKAGE CONTENTS: 10pcs Titanium coating ball nose upcut bits assorted in storage case. Number of Flutes: 2. Material: Solid Carbide..
  • DIMENSIONS: Shank diameter: 1/8 (3.175mm).
  • cutting edge diameter: 1mm/1.5mm/2mm/2.5mm/3.175mm, cutting edge length (CEL)/flute length: 4mm/6mm/8mm/12mm, overall length: 37-38mm.
  • RANGE OF PROCESSING: for cutting/engraving/carving/sculpturing/roughing/milling in materials like MDF, ABS, PVC, acrylic, density board, wood, plywood, rosewood, hardwood etc..
  • HIGH EFFICIENCY: these bits own sharp edge which is able for fast engraving that makes high efficiency.
  • durable, high precision and not easy to break.
  • it is smokeless and burr-free while processing.
  • PERFECT CUTTING: the design of flutes, larger spiral chip space of CNC Router Bit makes non-stick crumbs, smooth cutting and fast chip-removal.
Check Stock