Top Zirconium Heated Oxygen Sensor Reviews

ITEQ 5 Pcs Automotive Oxygen Sensor Socket Wrench Remover Tool and Thread Chaser Set

  • Perfect tool set for removing, inspecting, replacing and installing heated and non heated oxygen sensors and vacuum switches on most vehicles with computer-controlled engines.
  • 3 types of universal socket wrenchs cover various situations of oxygen sensor location.
  • 6-point 7/8” (22mm) socket opening fits all hexagon oxygen sensor, common 3/8” and 1/2” drive ends can be used with ratchet or breaker bar.
  • Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires.
  • Set Including: 1-pc 3/8” Dr. extra deep broach socket (3-1/8” long), 1-pc 3/8” Dr. low-profile crowfoot socket wrench (1-1/4” long), 1-pc 1/2” Dr. offset crowfoot socket wrench (1-15/16” long), 1-pc M18 x 1.5mm and 1-pc M12 x 1.25mm thread chasers with 3/8” drive to clean and repair damaged threads.
Check Stock

MIROZO 234-9009 Oxygen O2 Sensor Upstream for Toyota Avalon Camry Highlander RAV4 Sienna Solara for Lexus ES300 RX300 Air Fuel Ratio Sensor 1pcs

  • TIPS: If you are not sure whether this product is suitable for your model, please check your car in amazon vehicle adapter in the upper left corner, or in for m us your vehicle part number to let us check for you.
  • WHEN TO REPLACE: Once your fuel economy and per for mance will drop off pretty drastically,which shows the O2 sensor starts to fail. Your Check Engine light will be illuminated trouble codes relating to the O2 sensor will be stored in your engine control computer.
  • ADVANTAGES OF THE MIROZO OXYGEN SENSOR: Improve Engine Response & Performance.
  • Prevent premature failure of the catalytic converter..
  • FEATURES OF THE MIROZO OXYGEN SENSOR - Internal Ceramic Insulation for optimal sensor performance.
  • Laser welded sensor body to keep out contaminants.
  • Dual Insulated Protective Cover Prevents premature zirconium sensor wear.
  • Sealed wire leads prevent water interference with electronic signal..
  • FITMENT: Upstream Front for Lexus ES300 1998-1999, for Lexus RX300 1999-2003, for Toyota Avalon 1997-1999, for Toyota Camry 1997-2000, for Toyota Highlander 2001-2003, for Toyota RAV4 1997-2003, for Toyota Sienna 1999-2000, for Toyota Solara 1999-2000.
Check Stock

ABN Oxygen 02 Sensor Socket 7-Piece Tool Kit – 22mm (7/8in), 27mm, 29mm – All Vehicle O2 Removal and Installation

  • ...al sensor switches, vacuum switches, and brake light switches.
  • Each socket is permanently etched with size marking for your convenience.
  • MATCHES YOUR CAR: Universal fit for Audi, BMW, Citroen, Mercedes, Peugeot, Renault, Skoda, Vauxhall/Open (GM), and Volkswagen.
  • Sizes include 22mm (7/8”), 27mm, and 29mm.
  • For both heated and non-heated oxygen sensors.
  • Compatible with 3/8-inch and 1/2-inch ratchet drivers or extensions.
  • Side cutout sections allow the sockets to fit over wiring harness and prevent damage to wires.
  • BUILT TO LAST: Constructed from chrome-vanadium steel (CR-V) for extra strength and longevity.
  • Tools have a light coating of oil to protect them from rusting.
  • EASY STORAGE: Heavy-duty 9” x 2.25” x 8” inch (22.9cm x 5.7cm x 20.3cm) plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes (1) 29mm pressure/vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 6pt socket + (1) 22mm (7/8 inch) vacuum switch 12pt socket + (1) 27mm oil pressure sending unit socket + (1) 1-1/16 and 1 inch oil pressure sending unit socket + (1) 7/8 inch long oxygen sensor socket wrench + (1) 7/8 inch short oxygen sensor socket wrench + (1) carrying case.
Check Stock

Denso 234-4622 Downstream Oxygen Sensor with 4-Terminal Plug, Black

  • Designed to detect the amount of oxygen in the exhaust system. The mounting type is threaded.
  • Constructed from high quality material. The type of sensor is thimble and the thread diameter is 18mm.
  • Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing.
  • Manufactured with precision to meet OE standards.
  • NOTE:Kindly refer to the user manual provided as a PDF manual in the product description section.
Check Stock

Denso 2344256 OXYGEN SENSOR

  • High Quality: A ABIGAIL Oxygen Sensor Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing..
  • Interchange Part No.: A ABIGAIL Oxygen Sensor is Compatible with Bosch 15284 Denso 234-4668. This sensor will meet or exceed OEM standards, it is a direct replacement though it is NOT a genuine part..
  • Function:Lambda sensor can improve engine efficiency performance and fuel economy, reduce CO2 and other harmful emissions, extend expensive Catalytic ..
  • Performance: The metal shroud doesnot look as shiny as other Oxygen Sensors. Because it is made of SUS310 high temperature resistant material. And every single item is heated at 1562℉. The high temperature also mskes it stands wear and tear..
  • One Year Unlimited Warranty. Please use the Year & Make & Model drop down bar and check the wire length & plug & position to confirm the compatibility before placing orders. Please check your part pictures with our pictures, it must be completely same. Or it will not fit your car. It will save your time and cost. If you have any questions or the items you received with problems, contact us directly, we'll provide you with some professional suggestions within 24 hours..
Check Stock

Heated Oxygen Sensor 234-4622 13355 Downstream Sensor 2 for Toyota 4Runner Camry RAV4 Solara Tacoma Avalon Lexus ES300 ES300h ES330 GS300

  • High Quality: A ABIGAIL Oxygen Sensor Features double protection layer, aluminum oxide trap layer, PTFE filter and stainless steel housing..
  • Function:Lambda sensor can improve engine efficiency performance and fuel economy, reduce CO2 and other harmful emissions, extend expensive Catalytic Converter life..
  • Interchange Part number: A ABIGAIL Oxygen Sensor is Compatible with Bosch 13355 Denso 234-4622. These sensors will meet or exceed OEM standards, it is a direct replacement though it is NOT a genuine part..
  • The metal shroud doesnot look as shiny as other Oxygen Sensors. Because it is made of SUS310 high temperature resistant material. And every single item is heated at 1562. The high temperature also makes it stands wear and tear..
  • One Year Unlimited Warranty. Please use the Year & Make & Model drop down bar and check the wire length & plug & position to confirm the compatibility before placing orders. Please check your part pictures with our pictures, it must be completely same. Or it will not fit your car. It will save your time and cost. If you have any questions or the items you received with problems, contact us directly, we'll provide you with some professional suggestions within 24 hours..
Check Stock

Garage-Pro Oxygen Sensor After Catalytic Converter Compatible with 2003-2007 Honda Accord Fits 2004-2008 Acura TSX Heated 4-Wire Threaded-in type Fits K24A2 Engine

  • Garage-Pro Aftermarket Replacement Oxygen Sensor Compatible with 2003-2007 Honda Accord, Fits 2004-2008 Acura TSX.
  • Garage-Pro JCWARBH960908GP Features: Heated, 4-Wire, Threaded-in type.
  • Interchange Part Numbers: 25024476, 15409, 2344797.
  • A high quality, Direct Fit OE Replacement Oxygen Sensor with FREE 1-year UNLIMITED mileage warranty coverage on Garage-Pro items..
Check Stock

Ledaut Catalytic Converter Notched Style O2 Oxygen Sensor Bung and Plug 4 Bungs/ 4 Plugs M18X1.5

  • A. INTERCHANGE PART NUMBER/REPLACE OE: Perfect fit original equipment 15717、15716、15664、ZZC318861、XR3Z9G444CA. If the plug of the o2 sensor is....
  • B. VEHICLE COMPATIBILITY: For Select 1990-2011 FORD F-150/250/350, Explorer, Expedition, Escape, Escort, Excursion, E-150/250, Mustang, Ranger,....
  • C. CHECK THE FITMENT: Please check the Plug & Connector & Description for accurate information before buying this o2 sensors. Enter your vehicle model....
  • D.NIFEIDA OXYGEN SENSOR ADVANTAGE: 1) Made of high-quality stainless steel and other materials, strong durability, to ensure service life.
  • E.2-Year Warranty: Fast Delivery. Package Contains: 1*heated o2 sensor. 24-hours Online Friendly Customer Service. If there is a quality issue, it can....
Check Stock

Oxygen Sensor Replace OE Part # Bosch 17014 17315 Upstream Oxygen Sensor

  • Fitments: The 17014 oxygen sensor is fit for 2004-2006 Rolls-Royce. Please double check the fitment before your purchase. And you can get a more....
  • Replace OE #: The Apeixoto oxygen sensor is designed and manufactured with OE standard and can be replaced directly with fitted vehicles. The....
  • Function: Oxygen sensor is a key part to reduce the harmful emission and the increase the fuel efficiency. The Apeixoto oxygen sensor is wrapped with....
  • Solid Quality: Every sensor is 100% tested before shipping..
  • Warranty: You are backed by our Performance Assurance. this oxygen sensor comes with 30 Days HASSLE-FREE RETURN & 1 Year / 12 months unlimited....
Check Stock

Walker Products 350-34039 Oxygen Sensor Original Equipment Replacement Downstream Upstream O2 Sensor 1 Pack

  • Walker Products Oxygen Sensor Program is the Industry Leading OEM and Aftermarket Oxygen Sensor ( O2 Sensor ) Program.
  • Walker O2 Sensor is Manufactured to meet and exceed OE specifications.
  • increase fuel efficiency, decrease emissions,....
  • Backed by Walker Products buyer protection for worry free installation and performance.
  • Fitment: 2001-2020 Chrysler Dodge Jeep Mercedes-Benz Mitsubishi Ram Volkswagen Oxygen Sensor O2 Sensor.
  • Replacement: 15510 Oxygen Sensor, 234-4547.
Check Stock

MARSFLUX Oxygen O2 Sensor Compatible with 2003-2007 Upstream Front or Rear 5-Wires

  • 【Compatible】O2 Oxygen Sensor Compatible with 2003-2007 Upstream Front or Rear 5-Wires. OE:250-25001. Please enter the year, make and model number....
  • 【Professional Manufacturing】 O2 oxygen sensor is manufactured in strict ance with the original standard, stable performance, excellent....
  • 【Excellent Quality】 The oxygen sensor is simple to install, easy to use, plug and play, and can directly replace the old or damaged ones,....
  • 【Operating Principle】The role of the oxygen sensor is to determine whether there is excess oxygen in the exhaust after engine combustion and to....
  • 【Fast Shipping & Warranty Commitment】O2 oxygen sensor shipped directly from the USA within 2~5 working days, warranty 2 years. Please enter the....
Check Stock

15717 Oxygen Sensor Replacement for Lincoln Ford F150 Explorer Ranger Mustang Aston Martin Mazda Tribute Mercury at Downstream or Upstream Position with OE Bosch 15717

  • Fitments: 15717 oxygen sensor is fit for 2000 - 2004 Aston Martin DB7, 1990 - 1996 Ford Bronco, 1992 - 2011 Ford Crown Victoria, 2003 - 2014 Ford....
  • Replace OE Part #: The 15717 oxygen sensor is designed and manufactured with the OE standard. The interchange part # : 15717, 15716,15718....
  • Function: Oxygen sensor is a key part to reduce the harmful emission and the increase the fuel efficiency. The Apeixoto oxygen sensor is wrapped with....
  • Solid Quality: Every sensor is 100% tested before shipping. And please NOTE that this 15717 oxygen sensor has two types of connectors ( black &....
  • Warranty: You are backed by our Performance Assurance. this oxygen sensor comes with 30 Days HASSLE-FREE RETURN & 1 Year / 12 months unlimited....
Check Stock

Walker Products 350-34494 Oxygen Sensor, Original Equipment Replacement Downstream O2 Sensor, 4-W Direct Fit

  • Walker Products Oxygen Sensor Program is the Industry Leading OEM and Aftermarket Oxygen Sensor ( O2 Sensor ) Program.
  • Walker O2 Sensor is Manufactured to meet and exceed OE specifications.
  • increase fuel efficiency, decrease emissions, and improve engine performance.
  • Backed by Walker Products buyer protection for worry free installation and performance.
  • Fitment: 2006-2017 Cadillac Chevrolet GMC Hummer Pontiac Saturn Oxygen Sensor O2 Sensor.
  • Replacement: 234-4256, 15698 Oxygen Sensor.
Check Stock