Top Zinc Plated Anchor Reviews

CONFAST 3/4\ x 5-1/2\ Wedge Anchor Zinc Plated (Box of 20)

  • ZINC PLATED - Helps prevent rust in dry environments.
  • WIDE RANGE OF SIZES - Insures proper fastener for best results.
  • PACKAGED WITH NUTS AND WASHERS - Fast, quick, complete installation.
  • HOLE SIZE IS ANCHOR SIZE - Simplicity and ease of installation.
Check Stock

Vestil AS-383-4PK Concrete Anchor Four Bolt Kit, 3/8\ Diameter x 3\ Length

  • Anchor design makes installation quicker and easier.
  • Zinc plated steel provides a strong anchor point.
  • Anchor construction hold units in place in the most demanding environments.
Check Stock

Vestil AS-344-4PK Concrete Anchor Four Bolt Kit, 3/4\ Diameter x 4-1/4\ Length

  • Anchor design makes installation quicker and easier.
  • Zinc plated steel provides a strong anchor point.
  • Anchor construction hold units in place in the most demanding environments.
Check Stock

Amarine-made 2500Lbs Anchor Bungee Anchor Buddy Stretches from 7FT - 22FT 15FT - 50FT 7 - 22

  • Tether your boat offshore, away from a beach or rocky shoreline.
  • Connect anchor to with the high tensile strength Anchor Bungee to set the anchor offshore.
  • Heavy duty zinc plated shackle and snap hook for attaching the Anchor Bungee to your anchor and boat.
  • Anchor Bungee will pull the boat away from shore into safe waters.
  • 16 strand 2500 lb. tensile strength polypropylene rope, easy to spot, floats and stretches from 7 feet to 22 feet, Ideal for Boats.
Check Stock

uxcell® M6x45mm Zinc Plated Hammer Drive Anchor Expansion Bolt Fastener 8pcs

  • Total Length(Not Included Nail): 45mm/1.8".
Check Stock

Anrik 1\\/4 inch x 2-1\\/4 inch - 20 Pieces Wedge Anchor Zinc Plated Heavy Duty Fastener for Concrete

  • Wedge anchor diameter: 1/4" | Length: 2-1/4" | Qty: 20 pieces. Our wedge anchor is made from high quality carbon steel, and is zinc plated to prevent rust.
  • Drill bit diameter/Hole diameter is the same as anchor diameter. Use a 1/4" drill bit to drill a hole in the base material (Concrete only).
  • The wedge anchor is a torque-controlled, wedge expansion anchor. The required installation torque of the anchor is 4 ft/lbs..
  • The concrete anchor is for heavy duty fastening applications where high pull out values in concrete are needed. It is for concrete only, not for block or brick base material.
  • The wedge anchor is used in fastening sheet metal, steel and aluminum angles, or wood to concrete. The wedge anchor is ideal for structural anchorage, storage racking anchorage, machinery and hand rails installation.
Check Stock

Red Hound Auto 2 T-Hook Tie Down Rope Kit Anchor Point Boat Truck Trailer Set Pair

  • 2 Tiedown Anchor Points, Hardware Included.
  • Size: 5 1/4" Overall Length, 1 1/2" Tall, 3 5/8" Hole Spacing.
  • These heavy duty, commercial grade rope/cleat tie downs are made from premium industrial grade materials and factory tested.
  • Heavy duty metal is zinc plated for rust protection.
Check Stock

(Qty 1280) Masonry Screws 1/4” x 2-1/4” Blue, Hex Washer Head Concrete Screws Anchor Block or Brick 128 Pack 10/pp (15.99 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

(Qty 1280) Masonry Screws 3/16” x 1-3/4” Blue, P/Flat Head Concrete Screws Anchor Block or Brick 64 Pack 20/pp (13.96 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

(Qty 1280) Masonry Screws 1/4” x 1-3/4” Blue, Hex Washer Head Concrete Screws Anchor Block or Brick 128 Pack 10/pp (13.96 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

(Qty 1280) Masonry Screws 1/4” x 1-3/4” Blue, Hex Washer Head Diamond Point Screw Concrete Anchor Block or Brick 64 Pack 20/pp (13.96 – 100)

  • 1. MAXIMUM STRENGTH - Made with heat-treated carbon steel for ultimate durability and strength. TITEN self-tapping masonry screws tap threads into concrete, brick or block for a secure hold..
  • 2. CORROSION-RESISTANT COATING - TITEN blue coated anchor screws are 1000 HOUR SALT SPRAY TESTED and feature a non-organic, tri-layered ceramic coating for exceptional resistance to corrosive and atmospheric conditions..
  • 3. QUICK INSTALLATION - TITEN concrete screws require no hammering or anchor to install. Simply drill a hole and drive in the screw for fast, easy and hassle-free installation..
  • 4. VERSATILE - TITEN masonry block screws are perfect for attaching materials to concrete slabs, bricks, blocks and more. Ideal for both construction and remodeling projects..
  • 5. ZINC-PLATED FINISH - TITEN brick screws feature a zinc plated finish for added durability and resistance to wear and tear..
Check Stock

Treasure Gurus 20pc Concrete Masonry Nut Bolt Anchor Sleeve Assortment DIY Home Project Hardware Kit

  • Product Contect: 10pcs x Hollow Wall Anchor, 10pcs x Screw Eye.
  • Fit Wall Thickness: 3mm-32mm / 0.12''-12.6''.
  • Screw Eye Size: 68 x 18 x 11mm / 2.68" x 0.71" x 0.43" (L*OD*Inner D).
Check Stock

Guardian 00102 Beamer 2000+ - 3.2 lbs, Beam Anchor with Top Latch Adjustment, Aluminum Bar

  • Adjustable Anchorage: Perfect for a wide range of fall protection needs when working with structural steel I-beams.
  • Construction Material: Safety anchor bar is made from aluminum that contributes to its robust design. It is constructed of bronze manganese, zinc-plated steel and stainless-steel. It has nylon bushings that ensure smooth movement of ring across the bar.
  • Easy Installation: This aluminum beam anchorage can be installed on beams with 3.5-14 in. wide and up to 1.25 in. thick flanges. You can attach the anchor at the foot level or use it overhead and connect the lanyard or harness with the D-ring of anchor.
  • Application: This aluminum anchor is used with the Personal Fall Arrest System. It can be used in a range of industries for safety restraint applications. This robust anchor ensures maximum safety to the industrial workers, allowing them to work freely.
  • Specification: Guardian Fall Protection Beamer Anchor weighs 3.2 lbs. It has a working range capacity of 130-420 lbs. and 5000 lbs. minimum breaking strength.
Check Stock