Top Zinc Coating Steel Coil Reviews

WULF 2.5' Front 2' Rear Leveling Lift Kit compatible with 1998-2012 Ford Ranger 2WD with Coil Spring Suspension

  • Compatible with 1998-2012 Ford Ranger 2WD with Coil Spring Suspension.
  • FRONT: 2.5" Lift Solid Aluminum Coil Spring Spacers.
  • REAR: 2" Lift Ductile Cast Steel Angled Blocks, (4) Zinc Coated U-bolts, Hardware Included.
  • NOTE: 2WD models only. Requires coil spring suspension. Strut Spacers are not a 1:1 ratio regarding physical thickness to the amount of lift, they will lift the advertised amount Please see the description for full details, or contact us for assistance.
  • Fast Shipping. Manufacturers Lifetime Warranty. Dedicated Customer Service.
Check Stock

Electrodepot 60 Amp 4 Pole Normally Open Contactor 110-120V Coil Motor Load 40A Lighting 63A Bundle with Slotted Steel Zinc Plated DIN Rail 35 mm x 6 in – 1 Piece with 2#10 Screws

  • BUNDLE CONTENT: 4 ITEMS – One (1) 40A Contactor, one (1) compatible Slotted Steel Zinc Plated DIN Rail and two (2) drive stainless steel truss head....
  • APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp,....
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European....
Check Stock

Pair Rockville X6.5C Competition 6.5

  • ...er coils in them for advanced sound filtering to give you the best sound quality), Peak Power Rating: 1,000 Watts Per Pair/500 Watts Each, CEA Compliant RMS Rating: 250 Watts Per Pair/125 Watts Each.
  • Paper Woofer Cone With Cloth Edge Gives Amazing Bass and Mids, True Aluminum Bullet to give the woofer amazing sound, Steel Stamped Basket, Oversized 1.5 ASV Voice Coil, 14 oz. High Quality Ferrite Magnet, Cutout Diameter: 5.78 inches, Impedance: 4 Ohms, Tweeter Size: 3.86' x 1.97 inches, Cutout Diameter of Tweeter: 2.80inches, Audiophile 2-Way Crossover with 12db/Octave Roll-Off, Crossover Has Tweeter Attenuation Adjustment of -3db, -6db, Frequency Response: 40Hz 20,000 Hz.
  • Sound Pressure Level: 90dB @ 1w/1m, Fs: 110 Hz, Re: 3.6 Ohm, Qes: 1.024, Qts: 0.865, Qms: 5.579, Titanium Diaphragm Tweeter with 1 Kapton Voice Coils - the most premium voice coils on the market, This item uses CCAW voice coil windings which is the most expensive and best material for voice coil winding, Pre-installed mounting screws included.
  • Features of Included Crossovers: 2-Way Passive Crossover Network, One Pair of 4-Ohm Audiophile Grade Crossovers, Gold Plated Screw Terminals, Hingtat 100V Capacitor Modules (Best in Class), High Quality CCAW Coil Windings (Best in Class), High Gr....
Check Stock

NICHE Clutch Cable for Yamaha YFS 200 Blaster 2XJ-26335-01-00

  • Replaces OEM Part Numbers: Yamaha 2XJ-26335-01-00.
  • Compatible with Models: 1988-2006 Yamaha YFS 200 Blaster.
  • Zinc coating surface, The connection between round tips and steel strings made by zinc alloy.
Check Stock

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

  • ...e brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
  • 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
  • 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
  • 【Moistureproof】BLUEFIRE flux cored welding wire won't absorb water, so it can be stored in various environments for a long time. The special moisture-proof process extends its service life. Even if you can't use it up in a short time, you don't have to worry that it ....
Check Stock

Aobbmok 1/2\ Bore Solid Steel Style Zinc Plated Set Screw Shaft Collars

  • Product Name :Zinc Plated Set Screw Shaft Collars.
  • Material : High quality Carbon Steel with Zinc Plated Coating.
  • Package Content : 4-Pieces 1/2" Zinc Plated Shaft Collars with 1Pcs Set Screw..
Check Stock

Electrodepot 40 Amp 4 Pole Normally Closed Contactor, 110-120V Coil, Motor Load 20A, Lighting 40A Bundle with Slotted Steel Zinc Plated DIN Rail, 35 mm x 6 in – 1 Piece with 2 Number 10 Screws

  • BUNDLE CONTENT: 4 ITEMS – One (1) 40A Contactor, one (1) compatible Slotted Steel Zinc Plated DIN Rail and two (2) drive stainless steel truss head screws (#10, 1/2") for immediate installation.
  • APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 30VA, Sealed 4VA. Inductive/Motor Load: 20Amp, Resistive/Incandescent Load: 40Amp. DC Load: 30Amp @ 24VDC. Compatible with 20 Amp, 30 Amp, 32 Amp and 40 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NC with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 85 x 45 x 92 mm / 3.4'' x 1.7'' x 3.6'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specifications adopted by European (EN) and international (IEC) standards. Standard width 34.9mm (1.375”) length 152.40mm (6”) and t....
Check Stock

Electrodepot 40 Amp 12 Pole (4 Pole x 3) Normally Open, 110-120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with 8\ DIN Rail and 2 Number 10 Screws

  • BUNDLE CONTENT: 6 ITEMS – Three (3) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
  • one (1) compatible Slotted Steel Zinc Plated 35mm x 200mm DIN Rail and two (2) stainless steel truss head screws (#10, 1/2") for immediate home or industrial installation.
  • CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specificat....
Check Stock

Electrodepot 40 Amp 8 Pole (4 Pole x 2) Normally Open, 110/120VAC Coil (Silent Operation), Motor Load 40A and Lighting Load 63A Contactor Bundle with DIN Rail, 35 x 150 mm and 2#10 Screws

  • BUNDLE CONTENT: 5 ITEMS – Two (2) 40A 4 Pole Normally Open (NO) Contactors with power status indicator.
  • one (1) compatible Slotted Steel Zinc Plated 35mm x 150mm DIN Rail and two (2) stainless steel truss head screws (#10, 1/2") for immediate home or industrial installation.
  • CONTACTOR APPLICATIONS – Lighting, motor or switching. AC-1 for resistance furnaces, incandescent lamps or electric heaters.
  • and AC-3 for air conditioners, compressors or fans. 24/120/220/277 V, with an energy saving, silent and no humming coil.
  • COIL VOLTAGE AND LOAD – Contactor IEC 400V. Coil Voltage 110/120VAC, 50/60 Hz.
  • Coil load Inrush 52VA, Sealed 10VA. Inductive/Motor Load: 40Amp, Resistive/Incandescent Load: 63Amp. DC Load: 30Amp @ 24VDC. Compatible with 15 Amp, 20 Amp, 30 Amp, 32 Amp, 40 Amp, 50 Amp, 60 Amp and 63 Amp loads. Power Lug Terminal Capacity AWG # 4.
  • OTHER CONTACTOR DETAILS – Contactor type NO with 4 poles, power status indicator. IEC AC Rate: AC-1.
  • 8 kW. Electric e strength: 4 kV. Operating Temperature -30…+70 °C (-22…+158 °F). Dimensions (approx.): 54 x 64 x 84 mm / 2.1'' x 2.5'' x 3.3'' (Length x Width x Height).
  • DIN RAIL – Standard mounting support for any electromechanical component, including contactors, using the DIN specificatio....
Check Stock

4LIFETIMELINES Brake Line Kit – Professional Grade Galvanized Steel Tube 3/16 Brake Line – 25Ft Brake Line Tubing Coil with 16 Fittings

  • FITTINGS INCLUDED: The 4LIFETIMELINES brake line kit was designed for professional use and comes with 16 fittings: Steel Tube Nut 3/16 (3/8-24 I) x 10, Fitting 3/16 (7/16-24) x 2, Steel Tube Nut 3/16 (9/16-18 I) x 2, Fitting 3/16 (1/2-20) x 2..
  • PREMIUM QUALITY & DURABLE: This brake line tubing coil is made with professional grade double-wall galvanized steel tube and zinc coated corrosion-proofing technology, guaranteed to withstand the test of time..
  • ENHANCED FLEXIBILITY: Unlike similar products on the market, this 3/16” brake line meets all SAE and ISO specifications, being highly flexible and allowing for easy bending and shaping without kinking..
  • COMPATIBILITY: The 4LTL professional grade brake line meets SAE J527 international and US standards and requirements, being compatible to use in hydraulic braking systems..
  • EXTRA FEATURES & DIMENSIONS: This brake line tubing coil measures 25ft in length, for a convenient routing and installation. With 0.028” wall thickness, 3/16” OD and universal size, this brake line is a smart and economic replacement!.
Check Stock

GATE Caster Wheel 8-Inch Spring-Loaded Gate Caster, 275 lb. Capacity, Solid Rubber Tire, 360 Degree Rotation, Heavy-Duty Commercial Agricultural Grade, Universal Mount, by Tech Team

  • For use on heavy wood, cyclone, tubular steel pipe, or agricultural farm gates..
  • The 4.8” coil spring with 5mm diameter tempered steel wire provides 1.375” (35 mm) of vertical suspension compression travel acts like a shock absorber to automatically adjust height for travel over uneven surfaces. The 8” diameter flat free tire means that it stays round and rolling freely even in the dead of winter and eliminates gate sagging and maintains a level gate..
  • The gate wheel caster rotates a full 360 degrees on a heavy duty 3.5” industrial grade ball bearing assembly to travel in any direction. The universal fit 5.7mm thick zinc plated steel mounting bracket has two 11.5mm / .45” mounting holes for solid attachment to wood, cyclone, metal or tubular steel pipe agricultural gates..
  • The 8” x 1.875” flat free solid rubber tire is fitted to a stamped steel rust resistant zinc electroplated hub with 6 reinforcing rivets and 2 sets of ball bearings riding on a ½” steel axel..
Check Stock

AZSSMUK 5/8\ Bore Solid Steel Style Zinc Plated Set Screw Shaft Collars for Lawn Tractor,Garage Doors

  • Product Name :Zinc Plated Set Screw Shaft Collars.
  • Material : High quality Carbon Steel with Zinc Plated Coating.
  • Package Content : 4-Pieces 5/8" Zinc Plated Shaft Collars with 4Pcs Set Screw..
Check Stock

NICHE Clutch Cable for Yamaha YZF-R1 1998-2003 5JJ-26335-00-00 5PW-26335-01-00 Motorcycle

  • Replaces OEM Part Numbers: Yamaha 5JJ-26335-00-00, 5PW-26335-01-00.
  • Compatible with Models: Yamaha 1998-2001 YZF-R1, 2002-2003 YZF-R1.
  • Zinc coating surface, The connection between round tips and steel strings made by zinc alloy.
Check Stock