Top Zero Center Angle Finder Reviews

Proster 200mm 360°Angle Finder Data Hold LCD Angle Ruler One Key Zeroing 80mm 3 1/8\ Magnetic Height Gauge Depth Gauge for Woodworking Construction Home Decoration

【Accurate Angle Finder】200mm stainless steel ruler to measure length (metric and imperial), 360°angle sensor for relative and absolute angle measurement inside and outside, Range:0-360°,Resolution：0.05°,Accuracy：±0.3°,Repeatability：0.05°..
【One-key Data Hold & Zero Reseting】Knob locked one-key data hold function for both angle/depth gauge to hold the angles/depth measured at any time.
Zeroing reset button at any angle for relative measuring..
【Multi-function Magnetic Height Gauge】3-In-1 Height/Depth/Thickness Gauge,easy to measure bore/slot depths with plunger, one key mm/inch/fraction switch, range: 80mm, resolution: 0.05mm, accuracy: 0.10mm for routers horizontal/vertical measure with self standing magnetic feet..
【LCD Display & Stainless Steel】Sturdy plastic thickness gauge for with quick-reading digital LCD display, harden stainless steel angle finder ruler and depth ruler provides lifelong service..
【Wide Applicatoion】This angle finder with magnetic height depth thickness gauge is especially designed for Woodworking, Construction, Home Decoration, Table saws, Hand Routers, Etc..

Check Stock

Neoteck Digital Angle Finder Ruler 8 inch/200mm Stainless Steel Digital Protractor with Data Hold Function and Zeroing Resetting LCD Display Electronic Spirit Level Gauge Ruler

【Stainless Steel Angle Finder Ruler】 Digital LCD display for Easy Reading.
High Accuracy ±0.3°, Resolution 0.05°.
【Data Hold Function】Pressing HOLD Button to Hold the Angles Values in Any Times, Operate Conveniently.
【ON/OFF/ZERO Button】Short Press: Turn on/ Zeroing Resetting at Any Angle.
【Multi-functional Design】 Combined with Stainless Steel Ruler and Angle Sensor, Measuring Angle and Length.
Hinge Mechanism on the Angle Ruler Allows Full 360-degrees to Measure Inside and Outside.
【Smart Angle Finder Ruler】Come with a 3V CR2032 Battery, Automatically Shut Down after 6 Minutes of Inactivity.

Check Stock

General Tools T-Bevel Gauge & Protractor #828 - Digital Angle Finder with Full LCD Display & 8\ Stainless Steel Blade

PREVENT WASTE: This digital 5” stainless-steel ruler and angle finder combination tool makes precise, easy and fast measurements..
CORNER ANGLE FINDER: Digital angle gauge includes an LCD reader, makings measurements easy to read, while the innovative center check notch enables exact ruler placement markings. Use the electric meter for custom cuts and crown molding..
LEVEL RULER: This tool is ideal for finding angles in tight spots, and with the lock feature, the user can improve accuracy and save time when finding the measurement. It's perfect for doing work on framing, custom furniture building, and flooring..
PROTRACTOR WITH SWING ARM: Our stainless steel digital angle finder with measuring ruler has a built-in reverse angle function for usability and convenience. It's an essential tool and a great gift idea for a fellow carpenter, student, or machinist..
GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..

Check Stock

Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking, Metalworking, Construction

Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t hesitate to contact us for support or questions..

Check Stock

Digital Angle Finder Protractor 0-360 Degree T-Bevel Gauge & Protractor with Horizontal Vertical Bubble & Full LCD Display for Woodworking Metalworking Construction

Four Large Control Buttons: Pressing hold button on the digital angle finder to hold the measurement at any angle, it helps the users effectively record the angle values. In addition, including power on/off, read reverse angle, flip display, and clear readout..
Digital Sliding T-bevel: Turn the center knob to lock the angle, and use the protractor to copy any angle from 0 to 360 degrees, In addition, easily get 45 degree angle with a T bevel gauge..
LCD Display & Bubble Level: This highly protractor tool is equipped with a large LCD display for easy reading and integrates a steel locking knob for adjustment. There is a perfectly positioned bubble level on the end of the digital angle finder body to ensure the level before tracing any angles and making any cuts..
Worry Free Customer Service: We back each T bevel gauge with a free 1 year exchange service plus lifetime technology support, giving you complete peace of mind. Please don’t hesitate to contact us for support or questions..

Check Stock

Jackson Safety Pipe Marker Centering Head Tool, Curv-O-Mark Jumbo 7, To measure Pipes 1" and Up, Standard 8" Y-Type Head, Adjustable Dial Set Level, 14776

PIPE MEASURER – Designed for pipe fitters and welders as an measurer for setting center lines, establishing angles and marks for butt-ins, locating points inside pipes and tanks, laying out keyways, and measuring declivity.
JUMBO SIZE – Curv-O-Mark Jumbo #7 model digital angle finder tool used on pipes and tanks that measure 1" in diameter and larger.
Y HEAD – The center finder has a 8" Y type head fitted with adjustable dial bubble protractor (DSL).
BEST OPERATION – Use this Jackson Safety hardened centering pin angle finder with a small hammer or mallet to tap the pin in for the most effective pipe marking.
SAFETY STANDARDS – When it comes to providing innovative safety solutions, unparalleled features, long-lasting value, and comfort on the job, Jackson Safety has set the standard for the best protective gear and tools in the industry.

Check Stock

Digital Angle Gauge Level Box Angle Finder Digital Protractor Table,Saw Accessories with Magnetic Base Calculating for Carpentry/Building/Masonry/Automobile

【Digital Angle Gauge】The Digital Angle Finder with 0 to 360° (4*90°) measuring range, is designed for measurement in calculated Industries, also....
【High Accuracy】This digital angle finder with V-groove design on the measurement base, for better measurement on pipe, set Zero function at any....
【Built-in Magnets】The level box with a powerful built-in magnet on the base secures the attachment to saw tables, fences, blades, and other....
【Auto Power Off】Digital Protractor is operated by 2pcs AAA LR03 batteries(included) and can automatically Turn Off after 5 minutes of no....
【LCD Display】the digital angle gauge's values can be clearly and easily Read on the LCD Display. Low battery indicates. Small and light, it's....

Check Stock

Huepar Digital Angle Gauge Protractor, Electronic Bubble Angle Finder Dual Axis Level Box 0.01° Resolution V-Groove Magnetic Base&LCD Inclinometer Bevel Gauge with Audible Alert -Measures 0~360° AG03

✔️TWO MEASURING MODES & HIGH ACCURACY: Huepar digital angle finder comes with two measuring modes -Single Axis Mode and Dual Axis Bubble Mode, enabling the protractor to measure in five directions. Electronic bubble vial on display offers as indication when measuring for easier leveling work. The angle gauge features high accuracy of 0.1°at 0° ~90° , ±0.2° at other angles with resolution 0.01°. It delivers a wide measuring range of 4*90°(0~360°) in single axis, -40°~40°in dual axis..
✔️FIVE UNITS&BACKLIT LCD & AUTIBLE ALERT: Five selections of measuring units, degree(°)，percentage(%), mm/m, in/ft(in Fraction), in/ft(in Decimal), which can meet various working demands. Large LCD display with backlit provides accurate, quick and clear readings even in dark environment. After turning on the buzzer prompt function, you can set the alarm angle and range for easier working..
✔️MAGNETIC V-GROOVE BASE & SELF-INVERTING DISPLAY: With powerful magnetic V-groove bases at top and the bottom, this digital bevel gauge can be easily and firmly attached to miter saw, band saw, table saw blades, metal poles and even round pipes. You can also u....

Check Stock

CH Hanson 03040 Magnetic Stud Finder - 2 Pack

Upgraded 5-in-1 Wall Scanner-The M MARSIAN 5-in-1 stud finder has 5 scanning modes. This stud finder wall scanner includes stud modes, metal scan modes, and AC scan modes.
LCD Display & Sound Warning-The M MARSIAN stud finder wall scanner is equipped with the LCD screen with beeping sound to help you get a more evident and clear result on your work. The M MARSIAN stud finder also has a low battery gauge.
Easy Operation to Save your Time- The M MARSIAN wall scanner will quickly show the center and edge of the object. Even a beginner can easily locate the woods, metal, pipes, rebar, joists behind the walls as well as the live AC wires with this stud finder.
Auto Calibration for More Accuracy-The M MARSIAN wall scanner will automatically calibrate when you open it. Just press the scan button to start calibration and it will complete the moment the beep sound and screen show disappear.
Light & Ergonomic Grip Design-The M MARSIAN stud finder wall scanner is a lightweight and ergonomic design for your ease to hold it from any angle.PLEASE BE AWARE THAT THE 9-VOLT BATTERY IS NOT INCLUDED.

Check Stock

Tavool Stud Finder - 4 in 1 Electronic Wall Scanner Detector Wooden Metal Stud Sensor Locator Beam Finders Edge Center Finding with LCD Display for Wood AC Wire Metal Studs Detection

Multi-function Stud Finder with 4 Scanning Modes - Including Stud Scan,Deep Scan,Metal Scan and AC Scan,could quickly and easily meet all your scanning demands and give clear accurate detecting results..
Advanced Sensor Chips - Equipped with upgraded sensor chips,this scanner senses changes in density behind walls and locates the stud center with GREAT ACCURACY..
Large LED Display and Clear Sound Warning - Showing scanning direction and readings, together with beep warning indicating exact stud edge or center. Simple and easy to use, this stud finder could make your better handy tool..
Auto-Calibration & Safety - This stud finder would calibrate automatically as you hold the side button. Please make sure to calibrate it at a position with no studs or AC wires nearby. Tavool stud finder would always give warning on live AC wires,keep you away from potential mishaps..
Ergonomic Design - its ergonomic design gives you more comfortable experience when you hold it from any angle. You could certainly find great use with this stud scanner..

Check Stock

BOSCH 5-in-1 Digital Angle Finder and Inclinometer GAM 270 MFL

VERSATILITY: The Bosch GAM 270 MFL provides five tools in one including a digital angle finder, an inclinometer, a miter calculator, a protractor and level..
MEMORY: This angle finder provides angle memory, to provide the same angle and inclinometer measurements in different areas of the jobsite..
DISPLAY: Easy-to-read illuminated, rotating flip display for the inclinometer and angle finder. The miter cut calculation has an input measurement from 0-270 degrees...
DURABLE: Features robust housing with IP54 protection, making the angle finder water and dust resistant..
COMPLETE: The Bosch GAM 270 MFL includes a 5-in-1 digital angle finder, 24 in. leg extension, hard thermoformed case, 4 AA 1.5V batteries..

Check Stock

Digital Angle Finder,3in1 Auzof Cube Inclinometer Protractor with Backlight, Woodworking Measuring Tool-4-side Strong Magnetic Angle Gauge,Electronic Level, Measures & Sets Angles, Laser Class II

【3 in 1 Angle Finder】 Auzof digital angle finder and level can measure or set angles, check relative angles with zero calibration feature, and can be used as a laser digital level.Material: aluminum alloy| Measuring range: 4*90°| Resolution: 0.05°| Accuracy: ±0.2°| Repeatability: 0.1°| Power supply: 3.7V lithium battery , the unit is °, %, mm/m, IN/FT slope or spacing.
【The choice of craft lovers】Not only the baseboard, but also the strong magnetic upgrade at the four sides. Never slide on the table saw blade or any metal surface. Magnetic feature and lasers are great advantages for measuring, cutting, leveling in woodworking renovations and building furniture..
【Small size & portable】L2.4in, W2.4in, H1.2in, portable pocket size,Save time and effort hanging decorations. Dual lasers are great helper for horizontal and symmetrical installation. Laser Power:.
【Rechargeable/dustproof/waterproof】This inclinometer, digital angle finder comes complete with a USB-C charging cable for the internal 340mAH rechargeable battery. It also has dust-proof and IP67 waterproof performance with bright backlight. Even....

Check Stock

Pipe Center Finder, Pipefitter Tools w/Centering Head, Pipe Fitting Tools Center Finder Tool to Measure Pipe Diameter Over 0.5" and Up, 4" Y-Type Base Fitted with Adjustable Dial Bubble Protractor.

【Economical Measuring Tool】This Pipe Marker Centering Tool is efficient and useful for setting center lines, determining angles and marks for butt-ins and locating points inside pipes or tanks, arranging keyways and calculating declivity. It can measure tanks or pipes with a diameter of at least 1/2" or larger..
【Easy to Operate】Step1.Loosen or tighten the hexagonal nut with the included hex key allen wrench. Step2.Place the pipe marker tool on the pipe and find the angle you want. Step3.Push the center column down to the fixed point position. Step4.Tap with a hammer to leave a fixed point mark on the pipe..
【Durable and Sturdy Material】The pipe fitter tool can wrap around the circumference of pipes to measure and mark, and it is made of a highly flexible, heat-resistant gasket material. This Pipe Center Finder Tool is easy to use for pipe fitters and welders as a must have tool..
【Y-Head Shape Base with a DSL】This safety pipe center finder has a 4 inch Y-type base fitted with an adjustable dial bubble protractor (DSL). You could push the center column down to the fixed point position as you want. It is a must have on your list of pipe welding tools..
【Adjustable Dial Bubble Protractor】Printed with a scale in inches, an inch chart and....

Check Stock