Top Z Wave Water Sensor Reviews

Zooz 700 Series Z-Wave Plus Water Leak XS Sensor ZSE42 for for Smart Flood Prevention. Hub Required (Sold Separately). Compatible with SmartThings, Hubitat, and Ring Alarm.

  • PREVENT WATER DAMAGE: Receive alerts on your phone when water is detected by the sensor once you include it to your Z-Wave hub (required, sold separately). Check below for compatibility. Pair with the Zooz Titan Water Valve actuator (sold separately) for a smart flood prevention system..
  • EXTRA SMALL: Place it under your appliances to monitor for leaks discreetly. It's OK if the device is splashed with water but it can't be fully submerged so keep that in mind when choosing the installation location..
  • NEW 700 SERIES CHIP: You get more Z-Wave range and longer battery life with this sensor. Better signal means more reliable and quicker reports to help you act faster in case of a leak..
  • Z-WAVE COMPATIBILITY: Supported by open Z-Wave systems only, including Home Assistant, HomeSeer, Hubitat, and Ezlo hubs (NOT supported by older Vera hubs). Compatible with SmartThings and Ring Alarm (no access to advanced settings). NOT supported by alarm panels like Vivint, Qolsys, 2GIG, ADT, or others..
  • SMART SECURITY: Equipped with the highest level of S2 security with SmartStart for fully ....
Check Stock

Qubino Z-Wave Plus Smart On/Off Thermostat 2 ZMNKID3 (Z-Wave Hub Required)

  • UNIQUE Z-WAVE: The Stelpro KI is the first Z-Wave thermostat in North America to work with line voltage, with a 2-wire connection to the heater..
  • EFFICIENT HEATING: Remotely control your baseboard and convector heaters from your mobile device or computer (when included to a Z-Wave gateway controller - sold separately)..
  • SAVE SMART: Set your own temperature schedules to reduce energy bills with minimal effort.
  • take advantage of the device's ECO mode, designed to be as energy-efficient as possible..
  • ELEVATED CLIMATE CONTROL: Create advanced automations by pairing the Stelpro KI with other Z-Wave devices. Trigger the heating on/off with a door/window sensor, temperature sensor, motion sensor, etc..
  • CERTIFIED QUALITY: This thermostat is Z-Wave Plus and UL certified. Made in Canada. Works with SmartThings, Vera, HomeSeer, Nexia and Wink..
Check Stock

Fibaro FGFS-101 ZW5 FGFS101ZW5 Flood Sensor, Z-Wave Plus Water Leak Detector-FGFS-101, White

  • The ultimate Z-Wave Plus water leak sensor/detector, with temperature and tilt sensor.
  • Get alerted on your smartphone/tablet/email, trigger certain lights, activate specific scenes, or even sound an alarm when water is detected.
  • Three 24K plated Gold telescopic feet always makes contacts with both even and uneven surfaces and never corrodes.
  • Built-in temperature sensor can alert you If there is a sudden rise or fall in temperature, which can help prevent damage due to frozen pipes.
  • Z-Wave Plus certified sensor with enhanced features such as longer battery life and better range: ZC10-16025007.
Check Stock

Zooz 700 Series Z-Wave Universal Relay ZEN17 for Awnings, Garage Doors, Sprinklers, and More | 2 NO-C-NC Relays (20A, 10A) | Signal Repeater | Hub Required (Compatible with SmartThings and Hubitat)

  • ... physical on/off control or use your Z-Wave hub (required, sold separately) for wireless control. Your smart speaker is NOT a Z-Wave hub. This product is NOT supported by Wink or Z-Wave alarm panels..
  • 2 SMART INPUTS: Monitor 12-24 V or dry contact inputs separately from the dry contact outputs. Connect analog binary sensors to receive status updates in your Z-Wave hub from a connected door sensor, water sensor, HVAC system, or alarm panel. Use the inputs to trigger the outputs automatically..
  • AUTOMATE ANYTHING: Add Z-Wave connectivity to up / down DC motors in screens, motorized blinds, or awnings. Perfect to automate your garage door opener (use a single ZEN17 to control up to 2 garage doors independently), commercial gates, gas fireplace, sprinklers, doorbell, outdoor lighting, pool pump, whole house fan, and any 1-240 V device up to 20 A..
  • QUICK INSTALLATION: Power it with a 12-24 V AC/DC power source or a standard USB C cable (included) and a power supply (sold separately). Wall-mount ready. Jumper wires NOT included. Do NOT power with 110 V!.
  • NEW 700 Z-WAVE: Enjoy better signal coverage and a stronger Z-Wave repeater for your mesh network with the latest 700 series chip. It comes with S2 authenticated security and SmartStart for easy pairing. R....
Check Stock

Zooz Z-Wave Plus Q Sensor ZSE11 | Motion, Temperature, Humidity, Light (Hub Required)

  • 4 SMART SENSORS: Get motion alerts and monitor temperature, humidity, and light to take your smart home to the next level. Use this device as the trigger to lighting automations, security alerts, or climate control. It's as versatile and as quick to report as can be. Compatible Z-Wave hub required (sold separately)..
  • FLEXIBLE MOUNT: Use the included mounting bracket to adjust the sensor's field of view and ensure precise monitoring. Power the sensor with batteries (included) or a micro USB cable (sold separately). Always use a single power source only. Works as a Z-Wave repeater when included on USB power..
  • Z-WAVE COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to display multisensors correctly. The ZSE11 Q Sensor is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, Indigo, Vera, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized by your system..
  • MINIMAL DESIGN: Simple and modern look to compliment any interior. This sensor is small enough for discreet monitoring of your home, office, or warehouse space..
  • MORE SECURITY: Includes S2 Authenticated Z-Wave security and SmartStart for the safest communication possible. Back by a ....
Check Stock

Zooz Z-Wave Plus S2 Outdoor Motion Sensor ZSE29

  • OUTDOOR SENSOR: Introducing the first Z-Wave motion detector created for outdoor use. Monitor activity remotely through your Z-Wave hub (required, sold separately) and automate outdoor lighting based on motion. Keep away from direct rainfall and sunlight..
  • EASY TO INSTALL: Add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet..
  • COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo)..
  • SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mi....
Check Stock

HomeSeer HS-LS100+ Z-Wave Plus Leak Sensor

  • LEAK SENSOR: Sends Z-Wave commands back to your hub when water is sensed or has not been sensed for a period of time..
  • TWO MOUNTING OPTIONS: Simply place the unit where you want it or attach it to the provided cable probe wall mount for even greater accuracy..
  • SECURE: Works with Z-Wave S2 encryption for the highest level of security..
  • COMPATIBILITY: Works with most Z-Wave hubs. Device handler available for SmartThings new app users..
Check Stock

Sensative Z-Wave Plus Indoor/Outdoor Flood Prevention and Water Sensor Strips Drip Works with SmartThings

  • Ultra-thin Z-Wave Plus sensor notifies you when water leaks or freezing temperatures are detected.
  • Included temperature and light sensors monitor ambient temperature and light.
  • Communicates with Z-Wave devices up to 131 feet (40 meters).
  • Compatible with most Z-Wave controllers, plus Ring, Raspberry Pi and more.
Check Stock

HFS DC06 Microwave Radar Sensor Switch Module, 5.8G DC 5V Smart Motion Sensor Switch Board, Home Control Corridor Aisle Garage, etc

  • OUTDOOR SENSOR: Introducing the first Z-Wave motion detector created for outdoor use. Monitor activity remotely through your Z-Wave hub (required, sold separately) and automate outdoor lighting based on motion. Keep away from direct rainfall and sunlight..
  • EASY TO INSTALL: Add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet..
  • COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo)..
  • SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mi....
Check Stock

Aeotec TriSensor, Z-Wave Plus S2 Enabled Zwave Motion Sensor, Temperature, Light Sensor, Work with Zwave Hub Smartthings 3-in 1 Security System, Battery Powered

  • 3-in 1 Motion, Temperature, Light sensor. Motion sensor accurate to 23 feet, TriSensor also detects temperature -10~50°C / 14~122°C with accracy of ±1°C, 0~30000 LUX with ±3% accracy..
  • Wireless and Cordless. Powered by 1 x CR123A battery, estimated battery life: 1 Year. Battery not packed with the box..
  • Adjustable calibration. Craft your own smart home with 3 levels of detecting calibration..
  • Compatible with certified Z-Wave gateways including: Samsung SmartThings, Vera, Zipabox, Open Z-Wave, Homeseer HS3, Domoticz, Isy994i ZW universal controller and more..
  • Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-18056128..
Check Stock

Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor

  • 6-in-1 Zwave MultiSensor: smart motion sensors, z wave humidity, temperature sensor, Zwave light sensor, lux, UV, vibration sensor..
  • Up to 2 year battery life with 2 batteries or power via USB. 1 x CR123A included in the box..
  • Super-small at 1.65 inches. Can be installed in corner, in-wall, on shelf or recessed in ceiling with Recessor accessory..
  • Works with certified Z-Wave gateways and tested with Fibaro, HomeSeer, Indigo 7, openHAB, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-15070011.
Check Stock

Zooz 700 Series Z-Wave Plus 4-in-1 Sensor ZSE40 (Motion / Light / Temperature / Humidity)

  • 4 SMART SENSORS IN 1: This compact device detects and reports motion, temperature, humidity, and light level to your smart home app. Compatible Z-Wave hub required, sold separately..
  • NEW 700 SERIES VERSION: The included CR123A battery makes the sensor lasts much longer than any previous version. Updated motion detection allows you to get even quicker activity reports. New Z-Wave chip for better performance..
  • CUSTOMIZE IT: Choose from 7 levels of motion sensitivity, adjust the motion clear delay time, and pick from 3 different LED indicator modes (your hub needs to support advanced parameter input)..
  • SECURITY FIRST: This sensor is equipped with the latest S2 authenticated security and signal encryption. It's Z-Wave Plus 2 certified to ensure it complies with the highest industry standards. Supports SmartStart inclusion with a unique identifying PIN and QR code..
  • WILL IT WORK WITH MY HUB? This sensor is NOT supported by Wink, Vivint, ADT Pulse, Qolsys, or other Z-Wave alarm panels. It will work great with open systems like Hubitat, HomeSeer, Home Assistant, and compatible with SmartThings Hub..
Check Stock

Aeotec Multisensor 6 & Ceiling Recessor, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor, Battery included

  • 6-in-1 Zwave MultiSensor: smart motion sensors, z wave humidity, temperature sensor, Zwave light sensor, lux, UV, vibration sensor..
  • Up to 2 year battery life with 2 batteries or power via USB. 1 x CR123A included in the box..
  • Super-small at 1.65 inches. Can be installed in corner, in-wall, on shelf or recessed in ceiling with provided Recessor accessory..
  • Works with certified Z-Wave gateways and tested with Fibaro, HomeSeer, Indigo 7, openHAB, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-15070011.
Check Stock