Top Z Wave Sensor Switch Reviews

GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener Remote Controller, Small, Black

  • Go Control z-wave products provide up to 100 feet range between the wireless controller and/or the closest z-wave device.
  • Nortek security & control/Go Control has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg. . of z-wave products.
  • Garage door position sensor frequency: 345 MHz.
  • This product requires the use and pre-installation of a Z wave HUB..
  • Add Z-Wave control to your current garage door opener. Compatible with virtually any automatic garage opener w-sectional garage door.
  • Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device.
  • Provides both audible and visual warnings prior to door movement.
  • Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.. of Z-Wave products.
  • Specifications - Power: 120VAC, 50/60 Hz, Garage door position sensor frequency: 345 MHz, Z-Wave Frequency: 908.42 MHz.
Check Stock

GE Enbrighten Z-Wave Plus Smart Motion Light Switch, Compatible with Alexa, Google Assistant, SmartThings, Wink, Zwave Hub Required, Repeater/Range Extender, 3-Way Compatible, Black, 35547

  • SELECtABLE MOTION CONTROL – Personalize the switch with three motion-detection options – occupancy, vacancy and manual. Occupancy mode turns lights ON/OFF automatically, while lights are turned on manually and off automatically in the vacancy setting. To deactivate the motion sensor, select manual operation. With five time-out duration options ranging from five seconds to 30 minutes and up to 180-degree detection coverage, the switch accommodates any room with varying amounts of activity. Additionally, enjoy custom scenes, versatile scheduling and convenient alerts with remote operation and voice control when connected to a compatible hub..
  • 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199 or 46200. Up to four add-on switches can be connected to the same device..
  • FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up to 150ft. Exten....
Check Stock

NEO Z-Wave Plus Motion Sensor Z Wave Detector Home Automation Easy Installation Works with SmartThings Wink Vera Green

  • ▶ 3-in-1 SMART SENSOR: z-wave motion sensor can report motion, temperature detection and measures light levels. Feeling the environment change,....
  • ▶ 110-DEGREE MOTION DETECTION FOR ALARM: Motion can be detected from a top view of up to 110°, the position is at a height of 7 meters above the....
  • ▶ LONG-TIME&CONTINUOUS DETECT: The included CR123A battery makes the sensor much longer and service more intimate. Advanced infrared detection....
  • ▶ Z-WAVE TECHNOLOGY: Z-Wave Plus Certified and integrates with most Z-Wave Certified hubs. e.g. SmartThings, Vera, Fibaro, Zipato, Honeywell, Aeotec....
  • 【Please Note】: When the motion sensor will NOT be recognized (Wink): the motion sensor will be recognized as "Generic sensor" instead. only has....
Check Stock

Enbrighten Z-Wave Plus Smart Motion Sensor Light Switch, On/Off, Vacancy / Occupancy Sensor, Includes White and Lt. Almond, Zwave Hub Required, Works with SmartThings, Wink, and Alexa, 26931

  • SELECtABLE MOTION CONTROL – Personalize the switch with three motion-detection options – occupancy, vacancy and manual. Occupancy mode turns lights ON/OFF automatically, while lights are turned on manually and off automatically in the vacancy setting. To deactivate the motion sensor, select manual operation. With five time-out duration options ranging from five seconds to 30 minutes and up to 180-degree detection coverage, the switch accommodates any room with varying amounts of activity. Additionally, enjoy custom scenes, versatile scheduling and convenient alerts with remote operation and voice control when connected to a compatible hub..
  • 3-WAY READY – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups with required add-on switches – models 12723, 12728, 46199 or 46200. Up to four add-on switches can be connected to the same device.Voltage:120 volt.
  • FULL-HOME COVERAGE – Z-Wave Plus works with all previous Z-Wave generations to allow continued expansion of your home-automation network. The switch is capable of controlling indoor or outdoor fixtures for whole-home automation and repeats your Z-Wave signal from your hub or other devices to extend your range by up....
Check Stock

Qubino Z-Wave Plus Smart On/Off Thermostat 2 ZMNKID3 (Z-Wave Hub Required)

  • UNIQUE Z-WAVE: The Stelpro KI is the first Z-Wave thermostat in North America to work with line voltage, with a 2-wire connection to the heater..
  • EFFICIENT HEATING: Remotely control your baseboard and convector heaters from your mobile device or computer (when included to a Z-Wave gateway controller - sold separately)..
  • SAVE SMART: Set your own temperature schedules to reduce energy bills with minimal effort.
  • take advantage of the device's ECO mode, designed to be as energy-efficient as possible..
  • ELEVATED CLIMATE CONTROL: Create advanced automations by pairing the Stelpro KI with other Z-Wave devices. Trigger the heating on/off with a door/window sensor, temperature sensor, motion sensor, etc..
  • CERTIFIED QUALITY: This thermostat is Z-Wave Plus and UL certified. Made in Canada. Works with SmartThings, Vera, HomeSeer, Nexia and Wink..
Check Stock

Zooz Z-Wave Plus Q Sensor ZSE11 | Motion, Temperature, Humidity, Light (Hub Required)

  • 4 SMART SENSORS: Get motion alerts and monitor temperature, humidity, and light to take your smart home to the next level. Use this device as the trigger to lighting automations, security alerts, or climate control. It's as versatile and as quick to report as can be. Compatible Z-Wave hub required (sold separately)..
  • FLEXIBLE MOUNT: Use the included mounting bracket to adjust the sensor's field of view and ensure precise monitoring. Power the sensor with batteries (included) or a micro USB cable (sold separately). Always use a single power source only. Works as a Z-Wave repeater when included on USB power..
  • Z-WAVE COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to display multisensors correctly. The ZSE11 Q Sensor is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, Indigo, Vera, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized by your system..
  • MINIMAL DESIGN: Simple and modern look to compliment any interior. This sensor is small enough for discreet monitoring of your home, office, or warehouse space..
  • MORE SECURITY: Includes S2 Authenticated Z-Wave security and SmartStart for the safest communication possible. Back by a ....
Check Stock

Zooz Z-Wave Plus S2 Outdoor Motion Sensor ZSE29

  • OUTDOOR SENSOR: Introducing the first Z-Wave motion detector created for outdoor use. Monitor activity remotely through your Z-Wave hub (required, sold separately) and automate outdoor lighting based on motion. Keep away from direct rainfall and sunlight..
  • EASY TO INSTALL: Add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet..
  • COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo)..
  • SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mi....
Check Stock

GoControl WD500Z-1 Z-Wave 500-Watt Wall-Mount Dimmer Switch

  • Z-wave & Manual Control For Connected Lights.
  • White.This device requires a neutral connection.
  • Easily replace existing standard switch to add a Z-Wave controlled lighting dimmer. Compatible with any Z-Wave certified gateway.
  • Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device.
  • Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.. of Z-Wave products.
  • Compatible with incandescent and most dimmable fluorescent, halogen, Xenon and LED fixtures and The wires are pre-cut for easy stripping..
Check Stock

ENERWAVE Z-Wave Plus Relay, Hidden Smart Switch Wireless Remote Control to Lights and Ceiling Fans, 120-277VAC, 10A, Neutral Wire Required, ZWN-RSM1-PLUS, Black

  • Z-Wave micro switch installs behind an existing wall switch to upgrade it into a Z-Wave switch. Upgrade home automation system while keeping your original switches.
  • Wirelessly control your appliances (lights, fans) from an internet-connected smartphone, tablet, or computer.
  • Utilizes Z-Wave Plus featuring improved battery life, wireless range, increased bandwidth.
  • Acts as a Z-Wave repeater to extend the range of Z-Wave signal up to 100ft.
  • the switch will still work if the module fails.
  • Z-Wave hub and neutral wire required. Single Pole, 120-277 VAC, 50/60Hz, Up to 150ft Range, 10, 000mA (10A) Maximum Load, 908. 42MHz, Slim Design - Dimensions: 1. 63" x 1. 63" x 0. 82". FCC and ETL listed. 1-year.
Check Stock

HFS DC06 Microwave Radar Sensor Switch Module, 5.8G DC 5V Smart Motion Sensor Switch Board, Home Control Corridor Aisle Garage, etc

  • OUTDOOR SENSOR: Introducing the first Z-Wave motion detector created for outdoor use. Monitor activity remotely through your Z-Wave hub (required, sold separately) and automate outdoor lighting based on motion. Keep away from direct rainfall and sunlight..
  • EASY TO INSTALL: Add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet..
  • COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo)..
  • SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mi....
Check Stock

NEO Z-Wave Plus Smart Light Switch 1 Gang 2 Switchs in-Wall Smart Switch Touch Panel Touch Sensitive Home Automation Remote Control, Work with Z-Wave Hub

  • 【SIMPLE OPERATION】 Each light switch has a unique ID code. When you add or remove the switch from the alarm host, just place light switch in the Z-wave network range of gateway. The LED Night Navigation can easily to spot the position of the lights in the night..
  • 【MAKING A COMPARISON】Compare with the traditional light switch. The device not only does it allow for manual control, but also remote. Meet the requirements of traditional switch wiring, no need to change the exiting wire.High Touch Sensitive, it can provide immediately response. You also can check the real-time status of lights from your mobile phone APP. Remind you to turn off lights and save energy..
  • 【AUTOMATE YOUR LIFE】 Automate your NEO smart switch with Z-Wave gateway and set it to turn lights on or off when you get home. The smart switch can control incandescent, resistive, fluorescent, and inductive lights. Only used indoor, NOT dimmer..
  • 【Z-WAVE TECHNOLOGY】 Z-Wave Plus Certified and integrates with most Z-Wave Certified hubs. Support multi-device controlled, can be working interactively with other Z-Wave sensors via the gateway..
  • 【Important Notes Before Buying】 1) Please double check the size of the switch and mounting bracket. The device is 1 gang and support 2 switc....
Check Stock

Aeotec TriSensor, Z-Wave Plus S2 Enabled Zwave Motion Sensor, Temperature, Light Sensor, Work with Zwave Hub Smartthings 3-in 1 Security System, Battery Powered

  • 3-in 1 Motion, Temperature, Light sensor. Motion sensor accurate to 23 feet, TriSensor also detects temperature -10~50°C / 14~122°C with accracy of ±1°C, 0~30000 LUX with ±3% accracy..
  • Wireless and Cordless. Powered by 1 x CR123A battery, estimated battery life: 1 Year. Battery not packed with the box..
  • Adjustable calibration. Craft your own smart home with 3 levels of detecting calibration..
  • Compatible with certified Z-Wave gateways including: Samsung SmartThings, Vera, Zipabox, Open Z-Wave, Homeseer HS3, Domoticz, Isy994i ZW universal controller and more..
  • Z-Wave Plus and Z-Wave S2 certified for quicker response time, better wireless range up to 490 feet in open space, and additional wireless security encryption. Z-Wave Plus certification number: ZC10-18056128..
Check Stock

Aeotec Multisensor 6 with Battery, Z-Wave Plus 6-in-1 Motion, Temperature, Humidity, Light, UV, Vibration Sensor

  • 6-in-1 Zwave MultiSensor: smart motion sensors, z wave humidity, temperature sensor, Zwave light sensor, lux, UV, vibration sensor..
  • Up to 2 year battery life with 2 batteries or power via USB. 1 x CR123A included in the box..
  • Super-small at 1.65 inches. Can be installed in corner, in-wall, on shelf or recessed in ceiling with Recessor accessory..
  • Works with certified Z-Wave gateways and tested with Fibaro, HomeSeer, Indigo 7, openHAB, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-15070011.
Check Stock