Top Z Wave Led Strip Light Controller Reviews

Nortek GoControl WD500Z5-1: Z-Wave Wall Dimmer Switch 500W 908.42 MHz 120VAC 15A

  • ...able Trim Ring The WD500Z5-1 Wall Mount Switch has a field replaceable trim ring - the color of the device can be altered with the Trim Ring Kit model in black, brown, almond and ivory. Auto-Sense: Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status..
  • Maximum Load: 500 Watts for control of permanently installed lighting fixtures only (Not for control of receptacles) Signal (Frequency): 908.42 MHz Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device Input: 120v 15A 60Hz.
  • Network wide inclusion Scene: Command class Security beaming Requires a Neutral Auto-Sense feature built-in Replaceable trim ring design.
  • Note to Installers: When installing a Z-Wave 3-Way Light setup utilizing Nortek Security & Control products, you will need a Load Bearing switch (WS15Z-1, WD500Z-1 or WD1000Z-1) and a non-load bearing WT00Z-1. Multiple WT00Z-1 switches can be utilized to control multiple Load Bearing devices. Please refer to the linked Technical Bulletin on Z-Wave 3-Way Light Switch Setup for more information..
Check Stock

ZRC-90US, BW8510US, by Remotec, Cert ID: ZC10-15100007

  • ...AL is present. Wire it just like the ZEN21/ZEN71 models. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too!.
  • Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN32 Scene Controller is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system..
  • NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever, faster communication, with S2 authenticated security and SmartStart for effortless pairing..
  • EASY INSTALLATION: Clear diagrams and 7-day a week support included. No side tabs and just 1.1" deep to fit shallow and crowded switch boxes. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards. Backed by a 5-year warranty..
Check Stock

EATON RF9601DW Z-Wave Plus Wireless Switch, White

  • Z-Wave Plus devices can be controlled through voice assistants such as Amazon Alexa or Google Home when used with compatible Z-Wave controller/hub.
  • 3-Way control when used with Accessory Switch (RF9642).
  • Can be associated with up to 5 other Z-Wave Plus devices.
  • Dimmable blue LED at center right of paddle illuminates to indicate ON/OFF status.
Check Stock

Zooz 700 Series Z-Wave Plus Mesh Network Scene Controller ZEN32, White | Z-Wave Hub Required

  • ...AL is present. Wire it just like the ZEN21/ZEN71 models. Please follow the appropriate diagram in the manual and rewire both boxes exactly as shown. Works great as a single pole switch too!.
  • Z-WAVE HUB COMPATIBILITY: Most basic Z-Wave systems aren't advanced enough to allow scene control programming. The ZEN32 Scene Controller is supported by: SmartThings (with a custom handler, instructions included with the product), Hubitat, Home Assistant, and HomeSeer. Please do NOT buy this device if your hub isn't listed here, it will not be recognized correctly by your system..
  • NEW 700 SERIES: This product is built on the latest 700 series Z-Wave chip for better signal coverage than ever, faster communication, with S2 authenticated security and SmartStart for effortless pairing..
  • EASY INSTALLATION: Clear diagrams and 7-day a week support included. No side tabs and just 1.1" deep to fit shallow and crowded switch boxes. NEUTRAL WIRE REQUIRED (check before buying). The device is ETL certified and conforms with North American safety standards. Backed by a 5-year warranty..
Check Stock

GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener Remote Controller, Small, Black

  • Go Control z-wave products provide up to 100 feet range between the wireless controller and/or the closest z-wave device.
  • Nortek security & control/Go Control has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg. . of z-wave products.
  • Garage door position sensor frequency: 345 MHz.
  • This product requires the use and pre-installation of a Z wave HUB..
  • Add Z-Wave control to your current garage door opener. Compatible with virtually any automatic garage opener w-sectional garage door.
  • Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device.
  • Provides both audible and visual warnings prior to door movement.
  • Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.. of Z-Wave products.
  • Specifications - Power: 120VAC, 50/60 Hz, Garage door position sensor frequency: 345 MHz, Z-Wave Frequency: 908.42 MHz.
Check Stock

Etsfmoa Unisex LED Beanie Hat with Light Gift for Men and Women USB Rechargeable Winter Knit Lighted Headlight Hats Headlamp Torch Skull Cap Fluorescent Yellow

  • BLUETOOTH LED CONTROLLER: With APP and music sync, this led light strip controller is designed to upgrade your 4-pin 10mm LED lights strip with better....
  • MUSIC SYNC WITH APP : After APP installed, the led strip will be connected automatically to the APP via bluetooth. For the music sync feature, the led....
  • WIDE COMPATIBILITY: This led controller with 2 ports, can fit for 2 reels of 4-pin 10mm 5050,3528,2835 RGB led strip light,as long as the led strips....
  • MORE WAYS TO CONTROL: By using this bluetooth led light controller, you have 3 ways to control your led strip lights: APP via your phone, IR remote....
  • WHAT YOU GET: 2-port Bluetooth LED controller with IR remote (Power Supply Not Included), 30 days money back guarantee and 18-month warranty as well....
Check Stock

2gig GD00Z-5 Z-Wave Garage Opener Door Contact Sensor Black

  • Go control Z-wave products provide up to 100 feet range between the wireless controller and/or the closest Z-wave device.
  • Nortek security & control/go control has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide....
  • Add Z-wave control to your current garage door opener. Compatible with virtually any automatic garage opener w-section garage door.
  • Linear Z-wave products provide up to 100 feet range between the wireless controller and/or the closest Z-wave device.
Check Stock

LED Strip Light Controller with APP, Music Sync and IR Remote for Upgrading 4-pin 10mm Led Lights Strip to Bluetooth Connection

  • BLUETOOTH LED CONTROLLER: With APP and music sync, this led light strip controller is designed to upgrade your 4-pin 10mm LED lights strip with better lighting experience..
  • MUSIC SYNC WITH APP : After APP installed, the led strip will be connected automatically to the APP via bluetooth. For the music sync feature, the led lights could dance to the music rhythm via the sensitivity adjustable mic built-in receiver box or via the mic of your phone..
  • WIDE COMPATIBILITY: This led controller with 2 ports, can fit for 2 reels of 4-pin 10mm 5050,3528,2835 RGB led strip light,as long as the led strips use 4-pin connectors for connection..
  • MORE WAYS TO CONTROL: By using this bluetooth led light controller, you have 3 ways to control your led strip lights: APP via your phone, IR remote control and button control (3 buttons on the IR receiver box)..
  • WHAT YOU GET: 2-port Bluetooth LED controller with IR remote (Power Supply Not Included), 30 days money back guarantee and 18-month warranty as well as friendly customer support..
Check Stock

Arrozon LED Lights Remote Control with Controller, 44 Keys IR Remote Controller Replacement for RGB Led Strip Lights(1 to 2 Controller)

  • [Fit for RGB LED Strip Light]:Suitable for 5050,3528,2835 RGB led strip light 4 pin..
  • [44 Keys Remote Controller]:It has 20 static colors, adjust brightness,control modes: Static/ Flash/ Strobe/ Fade-change/ RGB Smooth-change..
  • [DIY Mode]:According to your preferences to DIY its color..
  • [Controller Output]:Controller Output: DC 12V, 2A/Channel, 2-Port.
  • [1 to 2 Controller]:This led strip Controller can connector 2 roll led strip..
Check Stock

Kit Accessories Controller + 44-Key IR Remote Control

  • ◆ Fit for RGB LED Strip Light: Suitable for 5050, 3528, 2835 RGB led strip light with 4-Pin connectors. Not for RGBW strips which has 5-pin....
  • ◆ IR remote control: The working range of the remote control is 30 feet.
  • please note that the remote control must be pointed at the controller....
  • ◆ Multi-function: has 12 kinds of static colors, brightness adjustment.
  • Static/ Flash/ Strobe/ Fade-change/ RGB Smooth-change.
  • ◆ Safe to Use: Input DC 24V, Max output current is 5.8A. The remote controller is Low voltage, Low heat, no radiation, it is safe and touchable.
  • ◆ 1 to 2 Controller: This led strip Controller can connector 2 roll led strip.
Check Stock

NISICO LED Light Strip Connector Kits 5050 RGB LED 4 Pin Connectors for Strip Light,10mm Solderless Connector Complete Kits for LED Strip Quick Connection

  • Application: Fit to all 10mm wide 4Pin LED light strip quick connection. It is quick solderless connection between strip to strip, strip to controller, strip to the splitter,suitable for non-waterproof and waterproof LED light strip,when use for waterproof LED strip,please remove the PU glue on the surface of the strip soldering pad..
  • Easy Installation: Convenient,simple,quick installation without soldering,just open the clip, plug in the light strip then close it. It can be used to connect between strip to strip, strip to controller, strip to splitter..
  • Package Content : 30x 4 pin male to male connector, 20x mounting clips with screws, 10x L shape connectors, 10x gapless connectors, 2x T shape connectors, 10x self-adhesive connectors, 8x LED strip to strip jumper, 3x LED strip to RGB controller jumper, 4x 4Pin Gapless connectors with bare wire terminal,1x 1 to 2 way RGB splitter cable..
  • Working Condition: All wires and connectors are supporting 0-5A current and 5-24V voltage input..
  • Warranty: We provide 24 month warranty for all LED strip connectors, 90 days money back guarantee without any reason, and 24 hours online customer service..
Check Stock

FIBARO The Button Z-Wave Plus Scene Controller On-Off Trigger, FGPB-101-3, Red

  • The ZRC-90 Scene Master is a Z-Wave Central Scene Controller. When one of the buttons on the ZRC-90 is pushed, your Z-Wave central controller will receive a signal which it can use to trigger.
  • Frequency Region: U.S./Canada/Mexico, Z-Wave Library Version: 6.51.06.
  • Supported Command Classes: Device Reset Local,Association,AGI,Battery,Central Scene,Powerlevel,Wake Up.
Check Stock

PHOPOLLO 100ft Led Lights for Bedroom Sync with Music, Led Strip Lights Compatible with Alexa and Google Home

  • Wifi LED Controller. Now control your LED light strips using your iPhone or Samsung Smartphone from anywhere. This little device helps connecting your RGB LED light strips to wifi network. You just need to download a free app from your mobile phone and then start enjoying free control without looking around for IR remote..
  • Works with Alexa, Google Assistant & IFTTT. Wireless Smart Strip Light Controller is compatible with Amazon Alexa and Google Home. Simply turn your led lights on/off, change brightness and colors by voice command. DIY your room or TV strip lights depending on various events by connecting it to IFTTT..
  • Lights Dancing With Music. When playing music with your phone, the LED strip controller makes the lights beat with music. Great for building atmosphere of party or dating. What's more, with 16 million color control, the app allows you to select any color, intensity, or pattern, as well as program the lights to store 5 own created colors and brightness levels..
  • Sync Control by Group & Timer Mode. The led controller supports to control multi LED strips at the same time. Name each LED strip in app and sort each into different group. You can control certain group or individual light strip with the Magic Home app. And also you can use th....
Check Stock