Top Z Wave Garage Reviews

Zooz Z-Wave Plus S2 MultiRelay ZEN16 for Garage Doors, Sprinklers, Gas Fireplace; 3 Dry Contact Relays (15A, 15A, 20A); 12-24 V AC/DC or USB C Power; Signal Repeater; Hub Required

  • VERSATILE APPLICATIONS: Great to automate your garage door (up to 3 doors with just 1 MultiRelay!), commercial garage doors at your business, gas fireplace, sprinklers, doorbell, landscape lights, pool pump, whole house fan, and any 1-240 V device up to 20 A..
  • DIY INSTALLATION: Power it with a standard USB C cable and a 5V power supply (do NOT use USB chargers or Apple accessories) or 12-24 V AC/DC power source. Wall-mount ready. Power adapter or USB cable NOT included. Jumper wires NOT included. Do NOT power with 110 V! Do NOT apply Voltage to the input (switch) terminals!.
  • RELIABLE Z-WAVE: Comes with the latest S2 security and a powerful Z-Wave Plus signal repeater to boost your network. Remembers and restores on/off status after power failure. Built-in auto-on and auto-off timer available if your hub supports advanced settings. The device is ETL certified and conforms with North American safety standards..
  • HUB COMPATIBILITY: This is an advanced Z-Wave device and it requires an open Z-Wave hub to display correctly. It was tested to work well with Hubitat, Vera, openHAB, and on SmartThings with a custom device handler (please go to Zooz support page for details). ADT Pulse, Vivint, Wink, and Ring all offer partial control (one relay or all at once inst....
Check Stock

LYNX Touch 7000 Control System by Honeywell 7\ full-color touchscreen WiFi ZWave compatible

  • ...ven if the system is tampered with during the entry and communications delay times. APL can be selected when using a Honeywell GSM or IP communicator. Voice announcement of system and zone status Family message center (for user recorded messages) Works with Honeywell Total Connect - Remote control of security, garage doors and Z-Wave devices - Selected event notifications Voice chime by zone 10 selectable chime tones Automatic stay arming 48 user codes (Installer, Master, plus 46 Secondary, including Duress and Guest) Three panic functions Wall or desk mount Viewable event log stores up to 256 events Exit error feature (detects difference between an actual alarm and exit alarm caused by leaving a door open after the exit delay expires) Case tamper RF jam detection Quick Exit feature provides users with an exit delay after arming their system Night Stay and Silent Exit modes Hinged cover for easy installation Real-time clock display Garage Door Function - Up to four garage doors per system - Unique garage door icon - View and monitor garage door status - Auto-secure feature - Remote notification via Honeywell Total Connect - Garage door control* - Automatically control door via scenes, rules and schedules - Locally open/close garage door from tou....
Check Stock

Aeotec Range Extender 6, Z-Wave Plus repeater

  • Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus..
  • Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices..
  • Plug in to 110 volt wall socket. Small design so it does not block other outlets.
  • Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-16095239DescriptionYou use Z-Wave to manage your smart home. You use Range Extender 6 to keep Z-Wave reliable. Aeotec's Range Extender 6 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals. Simply plug it into a power socket, connect it to your Z-Wave network, and it automatically starts improving any poor Z-Wave signals that are in range. As it's custom desgined as a wireless signal booster, Range Extender 6 performs better than other Z-Wave devices that offer simply repeating.
  • it amplifies the signal too. Designed to use Z-Wave Plus, unlike previous editions Range Extender 6 can work with advanced Z-Wave features such as encryption and security devices such as door locks while remaining compatible with older versions of Z-Wave. It repeats signals 250% faster than other signal repeaters and can repeat Z-Wave signals up to 492....
Check Stock

Minoston Z-Wave Plus Smart Plug, Outdoor On/Off Outlet Switch, ZWave Hub Required, Weather-Resistant, Built-in Repeater, Work with SmartThings, Wink, Alexa, Black(MP22Z)

  • ...neywell, 2GIG, Hubitat(change device type). ALEXA & GOOGLE ASSISTANT COMPATIBLE (requires a Z-Wave certified hub). CANNOT connect directly with ECHO PLUS！Z-Wave Frequency: 908.42MHz. FCC & ETL listed..
  • Ideal for Outdoor: IP65 Weather-resistant housing. Ideal for Garden, Backyard, Kitchen, Bathroom, Porch, Balcony, Garage, Basement, Patio or Electric grill, Sprinkler, Washing machine, Christmas tree, landscape lighting, fountains, lamps, pumps, and other outdoor or indoor-use electric appliances, etc--should not be exposed directly to rain or immersed in water..
  • Schedule and Timer: You can set automatic daily timers or create on/off routing so that your devices can turn on and off automatically. And saving energy when the plugged-in appliances are not needed or are left on by accident..
  • Work with: MP22Z outdoor smart plug designed for use for or Electric grill, Sprinkler, Washing machine, Christmas tree, landscape lighting, fountains, lamps, pumps, and other outdoor or indoor-use electric appliances, etc..
  • How to set up: Pair it with your hub and plug in the device you want to remote control. Now you can use your cellphone to turn the device on/off, schedule an event and group the things you want to control together..
Check Stock

GoControl WD500Z-1 Z-Wave 500-Watt Wall-Mount Dimmer Switch

  • Z-wave & Manual Control For Connected Lights.
  • White.This device requires a neutral connection.
  • Easily replace existing standard switch to add a Z-Wave controlled lighting dimmer. Compatible with any Z-Wave certified gateway.
  • Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device.
  • Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.. of Z-Wave products.
  • Compatible with incandescent and most dimmable fluorescent, halogen, Xenon and LED fixtures and The wires are pre-cut for easy stripping..
Check Stock

Peanut Butter SmartSticks 3 Pack Bundle

  • LATEST Z-WAVE TECH: SmartStick+ Includes a 700 Series Z-Wave Module (v7.17x firmware) and is Z-Wave Plus V2 Certified.
  • SUPPORTS Z-WAVE S2 SECURITY: Includes Smart Start Inclusion (Requires Smart Start Compatible Hub or Software).
  • Z-FLASH COMPATIBLE: Works Nicely with HomeSeer Z-Flash OTA Firmware Updater.
  • Z-WAVE PLUS (V2) PERMORMANCE: Longest Range, Fastest Transmission Speed, Best Bandwidth.
  • SUPPORTS NETWORK BACKUP & RESTORE: Easily restore or move your network to another SmartStick+ (requires HomeSeer hub).
Check Stock

Zooz 700 Series Z-Wave Plus S2 USB Stick ZST10 700, Great for DIY Smart Home (Use with Home Assistant or HomeSeer Software)

  • READ BEFORE YOU BUY: The Z-Wave stick is for advanced users only, NOT for beginners. You must be comfortable with programming and have expert computer and Z-Wave knowledge to use this device..
  • S2 SECURE NEW 700 SERIES Z-WAVE PLUS: Take advantage of the new 700 Series Z-Wave with more range and S2 authenticated security protocol. It means that you can fully benefit from your S2 sensors, switches, and plugs running on the latest Z-Wave chip..
  • WHAT YOU NEED: This S2 700 Series Stick adds Z-Wave Plus capability to your DIY smart home set-up. You'll need a dedicated computer (PC, laptop, or Raspberry Pi, sold separately) and home automation software of your choice (not included) to complete the system..
  • ADVANCED Z-WAVE: Works great with the most popular software like Home Assitant (with JS), Indigo, and HomeSeer. Supports OTA firmware updates (works with Aeotec OTA firmware tool) and and all of the latest Z-Wave library commands..
  • SMART START: Supports the new quick and extra secure Z-Wave pairing method. Just scan the QR codes from any SmartStart Z-Wave Plus accessories to your home automation interface and power them on. They'll join automatically. Make sure your smart home software supports this feature..
Check Stock

Aeotec Range Extender 6, Zwave Extender, Z-Wave Plus Repeater, 2 Pack

  • Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus..
  • Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices..
  • Plug in to 110 volt wall socket. Small design so it does not block other outlets.
  • Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, Vera and more..
  • Z-Wave Plus certified. Certification number: ZC10-16095239.
Check Stock

HomeSeer HS-DS100+ Z-Wave Plus Door/Window Sensor

  • 3 in 1 Zwave Sensor: Door and window sensor, temperature sensor and humidity sensor 3 in 1. Protect your home by detecting accidental opening/closing of doors, windows, cabinets and drawers. Check the battery level of the device, temperature and humidity through the app..
  • Safe and Reliable: Built-in Z-Wave 700 series, Z-Wave Plus V2, faster wireless speed, longer battery life and longer range than Z-Wave 500 series. SmartStart included, with standard S2 security features, is not only easy to install (auto-recognition via a quick scan of a QR code), but also secure..
  • Long-Life Battery: This smart sensor is powered by a CR2450 battery (battery included, no need to bring your own). The lifespan is 3 years. The sensor’s power saving mode extends battery life compared to other sensors..
  • Customized Events: Personalize how your Z-Wave devices talk to each other: when the front door is opened in the evening, automatically turn on the welcome lights. When a backdoor is opened unexpectedly, trigger a Z-Wave alarm siren..
  • Z-Wave Hub Compatibility: This z-wave door sensor works with certified Z-Wave gateways, Fibaro, SmartThings, Vera..
Check Stock

Zooz Z-Wave Plus Power Switch ZEN15 for 110V AC Units, Sump Pumps, Humidifiers, and More

  • POWERFUL PLUG: The only Z-Wave Plug that lets you safely control and monitor heavy-duty 110V appliances from your Z-Wave smart home system. Connect your refrigerator, humidifier or dehumidifier, AC unit, fan, sump pump, or a gas clothes dryer to Z-Wave. NEW: 45 degree angled plug so you can fit 2 Smart Switches in a single receptacle!.
  • POWERFUL Z-WAVE: With built-in Z-Wave Plus signal repeater and range test tool, the Power Switch will boost your whole Z-Wave network while keeping it protected with AES signal encryption..
  • POWERFUL CONTROL: Monitor energy use of connected appliances in live mode or over time with W, kWh, A, and V reports (your Z-Wave hub needs to support this feature). NOTE: It is NOT a power outage monitor! Quick status reports to the controller and on/off state recovery after power failure..
  • POWERFUL HARDWARE: Made from high-quality components that will last, even when it's very cold or very hot (14 - 104F, indoor use only). ETL certified: complies with North American electrical safety standards. Extra-thick flexible cord is perfect for installations with no immediate access to a receptacle..
  • COMPATIBILITY: Use the Power Switch with any certified Z-Wave gateway for simple on/off control (Wink, Z-Wave alarm panels). Advanced settings and....
Check Stock

Aeotec Smart Switch 6, Zwave Switch Z-Wave Plus Plug 15A for Home Security Automation Z-Wave Power Monitor, Without USB Port

  • Automate your home lights and appliances with Z-Wave plug in outlet. Aeotec zwave outlet controls up to 15 amps and monitors real-time power consumption with a variable color LED ring and reports the data to the gateway system..
  • Z-Wave Hub Required. Aeotec Smart Switch 6 Z-Wave plug is compatible with most Z-Wave gateways including SmartThings, Vera, Webee, Wink-hub, Zipabox, Universal Devices ISY994Zw, openHAB, Open Z-Wave, Oomi, Jeedom, Indigo 7, HomeSeer, Home Assistant, Abode and more..
  • Z-Wave Smart Plug, Small Size. Beautifully designed and powerful performance. Smart Switch 6 ZWave smart outlet plug has powerful features packed in the tiny size of 2.20 x 2.20 x 1.96 (1.38) inches..
  • Z-Wave Plus certified smartplug for quicker response time, better wireless zwave range, and additional wireless security encryption. Z Wave certification number: ZC10-15080004..
  • Built-in features include surge protection for a safer home and signal repeater to improve the communication between the other ZWave devices..
Check Stock

Optex TD-20U Indoor/Outdoor Wireless Infrared Transmitter

  • Works with Windows / Mac / Linux / Raspberry Pi 4 (2020 upgrade) to create a zwave hub for control of Z-Wave plus and Zwave devices, Tiny but powerful.
  • 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices. package: 1x Z-Stick Gen5, 1x Manual, the others are not included.
  • Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.
  • Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. No software included.
  • Z-Wave Plus certified. Certification number: ZC10-15060006.
Check Stock

EATON RF9640-NDW Z-Wave Plus Universal Dimmer, White

  • Compatible Z-Wave controller/hub required.
  • Z-Wave Plus devices can be controlled through voice assistants such as Amazon Alexa or Google Home when used with compatible Z-Wave controller/hub.
  • Compatible with Z-Wave Plus accessory dimmer (RF9642-Z) for wireless 3-way control, eliminating the need for traditional 3-way wiring or dedicated traveler wire.
  • Can be associated with up to 5 other Z-Wave Plus devices.
  • Dimmable seven step blue LED display alongside push pad indicates selected light level - even in full daylight (coordinates light level status with associated dimmer accessory).
Check Stock