Top Xcmg Rotary Drilling Rig Reviews

Happybuy 8 Inch/205MM Diamond Core Drilling Machine 3980W Diamond Core Drill Rig with Stand and Drill Bits,Wet Dry Core Drill Rig for Diamond Concrete Drilling Boring (Drill Bit Diameter: 4.25'/108MM)

  • 8 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 3980W copper motor. Maximum Speed: 750RPM. Maximum Coring Diameter: 8"/205 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

Happybuy 6 Inch/160MM Diamond Core Drilling Machine 2180W Diamond Core Drill Rig with Stand and Drill Bits,Wet Dry Core Drill Rig for Diamond Concrete Drilling Boring (Drill Bit Diameter: 4.25'/108MM)

  • 6.3 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 2180W copper motor. Maximum Speed: 1600RPM. Maximum Coring Diameter: 6.3"/160 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

VEVOR Core Drill Machine 305 MM 12 Inches Core Drill Rig Powerful Rugged Diamond Concrete Core Drill 110V 500 r/min Core Drill Rig Tool Wet Dry Concrete Brick Block Drilling 4800W 45 Degree Rotation

  • 12 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4800W copper motor. Maximum Speed: 500RPM. Maximum Coring Diameter: 12"/305 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and 45-degree rotatable large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate. Two casters for easy transport..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced co....
Check Stock

VEVOR 12Inch/305MM Core Drill Machine,4800W Core Drill Rig,Powerful Rugged Diamond Concrete Core Drill,110V 500r/m Wet Dry Concrete Brick Block Drilling Machine (Drill Bit Diameter:4.5'/114MM)

  • 12 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4800W copper motor. Maximum Speed: 500RPM. Maximum Coring Diameter: 12"/305 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and 45-degree rotatable large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate. Two casters for easy transport..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

BOSCH 11265EVS 1-5/8 Spline Combination Hammer

  • CONVENIENT: The Bosch RH540M Combo Rotary Hammer features the SDS-max Bit System for tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate.
  • POWER: This rotary hammer provides the best in class impact energy of 6.1 ft.-lbs. Weighing only, 15.2 lbs., the RH540M provides maximum productivity in all day drilling and chiseling applications.
  • VERSATILE: The RH540M features a combination dual mode selector knob to allow users to select between hammer drilling, chiseling only and the Vario-Lock function.
  • EFFICIENT: With Varo-Lock Positioning, the rotary hammer rotates and locks chisel into 12 different positions to optimize working angle. The tool also comes complete with service minder brushes to notify users when maintenance is needed.
  • VARIABLE SPEED: The variable speed dial allows for controlled drilling and chiseling applications. The motor is rated at 170 to 340 RPM in rotary mode and 1,200 to 2,750 BPM in hammer mode, which will easily reduce concrete to dust.
Check Stock

1-1/2″ Dry Diamond Core Drill Bits for Brick, Block or Masonry, 9.5″ Drilling Depth, 5/8″-11 Arbor

  • MULTIPURPOSE – designed to drill soft brick and building block.
  • HEAVY DUTY – embedded diamond concentration guarantees longer core life and efficient drilling.
  • DRILLING DEPTH – 9.5″ drilling depth.
  • WET OR DRY – recommended to use with handheld core drills or dedicated core drill rigs (rotary mode only).
  • ROTARY MODE ONLY – please only use rotary mode with our core bits.
Check Stock

Sabre Tools 1/2 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1/2\ x 16\ x 18\)

  • ✅ MAKITA’S SDS+ Drill Bit Set with Case For 7/8" or Greater SDS-Plus Chuck Rotary Hammer Drills | This set has 5 Premium, Long-Lasting, Heavy-Duty, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening into 4" Deep Heavy-Duty Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ 5 Heavy-Duty Makita SDS-Plus Drill Bit Set for Medium 4" Drilling Depths Includes: 1 Bit of 3/16" + 1 Bit of 1/4" + 1 Bit of 5/16" + 1 Bit of 3/8" + 1 Bit of 1/2" will work on Any SDS+ Rotary Hammer with at least 7/8" Chuck Size, including the Makita HR2475, HR2641X1, HR2811F, XRH01Z, HR2661, XRH04Z, XRH03Z and other 7/8" or Greater SDS-Plus Hammer Drills.
  • ✅ EASILY & SMOOTHLY DRILL 3-4X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/an....
Check Stock

Makita 2 Pack - SDS-Plus 3/4” Drill Bits For SDS+ Rotary Hammers - 10' Deep Drilling Into Concrete & Masonry

  • ✅ MAKITA’S 2 Pack 3/4” SDS+ Drill Bits for SDS+ Rotary Hammer Drills has 2 Premium, Long-Lasting, Tungsten Carbide Bits for EASY & Reliable drilling, screwing and fastening up to 10" into Masonry, Reinforced Concrete, Tile, Brick & Cinder Block.
  • ✅ Two 3/4" Ultra-Duty Makita SDS-Plus Drill Bits for Up to 10" Deep Drilling Depths.
  • ✅ EASILY & SMOOTHLY DRILL 4-5X MORE into Reinforced Concrete, Brick and Masonry by relying on Makita’s Reinforced, Premium Tungsten Carbide & Steel Bit Integrity for Unmatched EASE, LONG LIFE & SAFE Drilling | The Makita SDS-Plus drill bit flute is designed to allow maximal amount of concrete removal for both ease of use and effectiveness in concrete/masonry drilling.
  • ✅ AVOID LOWER PRICED & lower quality bits that prematurely wear and strain or overheat the powertool, resulting in high bit consumption rate, project completion delays, ineffective drilling and making the overall drilling/anchoring much more difficult | Makita's Single-Piece Steel Bits are heat forged for strength and longevity with a sharp Carbide Tip edge design for maximum impact on masonry/concrete material, allowing for EFFECTIVE and PRECISE drilling.
  • ✅ IDEAL for General Contractors and Construction Industry that require ULTRA DUTY SDS+ bits for....
Check Stock

BOSCH 1-9/16-Inch SDS-Max Combination Rotary Hammer RH540M, Blue

  • CONVENIENT: The Bosch RH540M Combo Rotary Hammer features the SDS-max Bit System for tool-free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate.
  • POWER: This rotary hammer provides the best in class impact energy of 6.1 ft.-lbs. Weighing only, 15.2 lbs., the RH540M provides maximum productivity in all day drilling and chiseling applications.
  • VERSATILE: The RH540M features a combination dual mode selector knob to allow users to select between hammer drilling, chiseling only and the Vario-Lock function.
  • EFFICIENT: With Varo-Lock Positioning, the rotary hammer rotates and locks chisel into 12 different positions to optimize working angle. The tool also comes complete with service minder brushes to notify users when maintenance is needed.
  • VARIABLE SPEED: The variable speed dial allows for controlled drilling and chiseling applications. The motor is rated at 170 to 340 RPM in rotary mode and 1,200 to 2,750 BPM in hammer mode, which will easily reduce concrete to dust.
Check Stock

CS Unitec ETN 162/3 P - 6-3/8" Capacity Concrete Core Drill - Wet/Dry Diamond Core Drill - 3-Speed For Concrete, Brick, Block, and Stone - MADE IN GERMANY - 110V

  • Heavy-duty, light-weight hand-held core drill rig with 6-3/8" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
  • Powerful 19.5 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 3 speed gear box (0-510/0-1150/0-2500 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
  • Only 15 lbs., Collar Diameter 60mm collar for easy mounting, rig mounting kits available. Easy Changeover for wet / dry drilling with integrated connections..
Check Stock

Rotary Hammer Drill Handife 12.5 Amp 1500W Heavy Duty Hammer 1-1/4'' SDS-Plus, 3 Functions 6-Speed Regulation with Vibration Damping Technology, Safety Clutch, Used for Concrete, Metal, and Stone

  • ...ng the machine. 6 adjustable speed (0-900RPM) could meet different work needs, such as concrete, metal, brick, stone and masonry, etc. Handife rotary hammer drill helps you to make an efficient life..
  • ⚒️【Multi-Function & Double Switch Design】Handife rotary hammer drill for concrete has 3 different functions: drilling(suitable for wood, steel , etc.), chiseling(suitable for concrete, marble or brick) , rotary hammer drilling(suitable for heavy duty work). It is easy to switch different function by two different switches, which could extend service life than single switch..
  • ⚒️【Safe and Ergonomic Design】Safety clutch protection designed could provide security if bit jams or high torque force. The integrated anti-vibration system and PU soft grip could decrease the vibration and fatigue. Anti-dust bottom structure and heat dissipation design could extend the rotary hammer’s use life..
  • ⚒️【360° Rotating Handle & SDS-Plus Chuck】Handife hammer drill has a 360° detachable rotating handle for convenient operation.The SDS-Plus chuck can easily and safely replace the drill bit..
  • ⚒️【Drilling Capacity】The max drilling diameter for concrete 1-1/4 inches (31.78mm), wood 1-1/2 (38.1mm), steel 1/2 (12.7mm). Whether removing tiles or bri....
Check Stock

TUNTROL 780W Flex Shaft Rotary Tool, Thicken 1/4' Shaft Foot Pedal Control Hanging Grinder Carver Electric Multi-function Metalworking Tools Repair Kit

  • 【Thicken Shaft】Our 1/4" Shaft is double stronger than 5/32" shaft, which give you more confidience on cutting or drilling bigger work pieces..
  • 【Powerful Motor】Our flexible shaft rotary tool is equipped with a powerful and stable 110V 780W motor, which can provide the speed of 500-24000 RPM. This rotary engraver machine is ideal for large-scale work that cannot be completed by mold grinder or rotary tool. Which can enough for limitless purposes from your DIY furniture remodeling to intricate automobile repairs and expert jewelry making..
  • 【Comfortable Stepless Speed Foot Pedal】 The foot pedal adds a lot comfort during work. The ABS plastic foot pedal for flex shaft rotary tool is sturdy and more secured for preventing heat production or transfer..
  • 【1/4" 3-Jaw Chuck】The stable and convenient 3-jaw chuck for the jewelers tools accepts accessories from 1/64", 1/32", 1/16", 3/32", 1/8", 5/32", 3/16", 1/4"to enhance versatility. Attachments are easy to replace and strong clamping force holds them firmly on the flex shaft drill under high pressure..
  • 【105+30pcs Tool Accessories】This high-performance rotary tool kit is extremely useful for cutting, drilling, sanding and polishing in small and delicate areas. These sanding power tools are sensit....
Check Stock

8" Wet Drill Core Bits for Concrete and Hard Masonry, 10mm Segment Height, 14" Drilling Depth, 1-1/4"-7 Arbor, Wet Only

  • MULTIPURPOSE - designed to drill concrete, concrete with light steel reinforcement or hard masonry.
  • HEAVY DUTY - embedded diamond concentration guarantees longer core life and efficient drilling.
  • WET/ROTARY MODE ONLY - recommended to use with handheld core drills or dedicated core drill rigs (rotary mode only, no wire mesh drilling).
Check Stock