Top Workholding Systems Reviews

Magswitch MagSquare 400

• An on/off magnetic work-holding square with 400 lb.
• (182 kg) of hold force from Magswitch Technology.
• M6 * 1 threaded holes on all sides and machined at 90° magnetic grip on 5 sides—strong on 3 sides.
• Versatile Workholding Square. Incredibly strong fast set ups, precise positioning. Make your own fixtures..
• Mounts anywhere with no limitations like clamps - use as a guide, stop or to secure steel.
• Magnetic grip on 5 sides. Holds flat and round steel..
• Machined at 90° and features pre-tapped holes on all sides for mounting tools, jigs and fixtures..

303 Stainless Steel Spherical Washer, Male & Female Assembly, 1/4\ Hole Size, 5/8\ OD, 3/16\ Nominal Thickness, Made in US (Pack of 5)

Te-Co 40106 2 Piece Steel Step Block Set, 1-1/2\ Thick, 2-15/32\ Width x 3-3/4\ Height, 2-1/2\ to 6\ Height Range

• For workholding during machining applications.
• Serrated teeth match all te-co serrated end clamps.
• Measures 2-15/32" width by 3-3/4" height.

TE-CO 20413 Machinist Clamp Kit, 1/2\ Table T-Slot x 3/8-16\ Stud, 52 Pieces

• Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
• For workholding during machining applications.
• 1/2" machine tool table T-slot to fit 1/2" T-slot nuts.
• Bridgeport type milling machines use Part No. 20402.
• Made from case hardened 1018 steel with a black-oxide finish.

TE-CO 20402 Machinist Clamp Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

• Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
• For workholding during machining applications.
• 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
• Bridgeport type milling machines use Part No. 20402.
• Made from case hardened 1018 steel with a black-oxide finish.

TE-CO 20401 Machinist Clamp Kit, 9/16\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

• Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
• For workholding during machining applications.
• 9/16" machine tool table T-slot to fit 9/16" T-slot nuts.
• Bridgeport type milling machines use Part No. 20402.
• Made from case hardened 1018 steel with a black-oxide finish.

TE-CO 20402PL Machinist Promo Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

• Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
• For workholding during machining applications.
• 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
• Bridgeport type milling machines use Part No. 20402.
• Made from case hardened 1018 steel with a black-oxide finish.

TE-CO 42705 12L14 Steel Spherical Washer, Black Oxide Finish, Male & Female Assembly, 3/4\ Hole Size, 1-5/8\ OD, 3/8\ Nominal Thickness, Made in US (Pack of 2)

• Material is case hardened 12L14 steel with black oxide finish.

Oumefar 15Pcs ER11 Spring Collets Set High Precision Workholding Engraving Collets for CNC Engraving Machine & Milling Lathe Tool

• SPRING STEEL ER11 COLLETS SET: The Spring Collet is made of high quality spring steel, they are stable in performance.
• HIGH PRECISION SPRING COLLETS SET: Fine workmanship, good elasticity, high precision.
• WORKHOLDING ENGRAVING COLLETS: Collet must be placed into collet chuck nut before inserting into collet chuck.
• INDIVIDUALLY PACKAGED COLLET SET: Each collet is well packed in separate protective container with label.
• WIDE APPLICATION SPRING COLLET: The Collet Set is suitable for CNC milling lathe tool and work-holding engraving machine.

L-A M6 x 12mm Thread T Slot Drop-in Bolt T-Bolt Hammer Head Bolt T Screw Stud for 3030 Series Standard 8mm T-Slot Aluminum Extrusion Profile (3030 Series, 20 Pcs), Silver

• Material is heat treated 1045 steel with black oxide finish.
• Measures 1" thread length by 1-3/4" overall length.

Magswitch Ultimate Thin Stock Jig Rip Guide - Tool Attachment for use with the Magswitch Workholding System

• The Thin Stock Jig Rip Guide attachment is the ultimate thin stock work holding tool - it's three tools in one! Built for use with the Magswitch Workholding system, the jig rip guide mounts to the Universal Mounting Base and MagJigs (not included).
• Features a stepped side for most common sizes of 1/8, 1/4 and 3/8". The opposite side is sloped for odd sizes up to ¾ inch.
• Enhances safety by keeping your fingers away from the blade while also minimizing chatter for clean cuts and is low profile enough for use on your smallest tables.
• This jig rip guide features a fixed roller bearing and extends forward for accurate repetitive ripping of your thin stock, making it ideal for thin stock hold down or infeed/outfeed on a table saw.
• The jig rip guide is built from strong and durable ABS UL94VO material for years of use. All required attachment hardware is included.

LISHINE 4 Inch & 8 Inch Bar Clamps, 8 Pack Quick Grip Clamps for Woodworking, Trigger Clamp One Handed Ratchet Clamp, Small Bar Clamp for Craft

• 【4&8 Inch Bar Clamp】Wood clamps woodworking sets capacity up to 4 inch and 8 inch. Throat depth: 1.25 inch and 2.4 inch..
• 【Powerful Clamping Force】4 inch trigger clamp with up to 65lbs of squeezing force and a metal ratcheting mechanism, suit for light duty works, woodworking F clamps and DIY carpentry. 8 inch bar clamp 150-lbs force for workholding hand tools, gluing, clamping and securing..
• 【Clamp And Spreader】Ratchet bar clamps are used in two ways, clamp or spreader. Easy to reverse jaws can turns clamp into spreading clamp or stretching tool..
• 【One-Handed Clamp】One handed release F clamp is adopted new grip and trigger design provides simple, you can operate with one hand. Spreader bar grip is comfortable to hold, press quick-release button to slide arm into desired length..
• 【Durable And Sturdy】Quick grip clamps for woodworking is made of nylon body and high-quality hardened steel that provide great impact resistance..

E-TING 6-Pack 4001 330Lbs Holding Capacity Adjustable Toggle Latch Clamp Smoker Latch Clamps 150Kg Quick Release Pull Latch Toggle Clamp for Various Tool Box

• Package Include - 6 Pack 4001 adjustable toggle clamp latch and 24PCS screws,.
• Material: Cold-rolled carbon Steel with Zinc plated coating for corrosion resistance.
• fit for different temperature environments, indoor or outdoor.Oil and Stain resistant red vinyl solid hand grips, complete with adjustable rubber pressure tips..
• Strong Holding Power - Made best quality of latch clamp made of top metal and enough strength to hole 330lbs(150kg)..
• Easy to Install - The toggle latch clamp are easy install, just fix them with screws. The installation distance is adjustable, maximum overall length is 4-1/8inch, lock up range from 3-1/2 to 4-1/8 inches long. Use them to keep the halves tightly or loosely closed as you like. Simply tighten the tension hook to get the maximum tightness..
• Used - 4001 toggle latch clamp perfectly fit for freezer door, cabinet doors, garbage cans, table leaf, storage box, tool boxes, cases, smoker lid, making jigs, tool fixtures, workholding, connecting movable parts, tensioning two sectional, and more..