Top Woodworking Angle Tool Reviews

Digital Angle Finder Protractor 2-in-1 Digital Miter Saw Protractor 7 Inch/200mm ABS Angle Ruler High Accuracy Miter Angle Measuring Tool for Woodworking Metalworking Carpenter Construction

【2 in 1 Digital Angle Finder】 PDDYIER 2-in-1 electronic digital miter saw protractor ruler for measuring lengths and angles(both internal and external), the combination of a millimeter and inch scale ruler and a protractor makes it easy to measure internal and external angles. Great gift for those who work in woodworking, construction, and engineering..
【Premium ABS Miter Saw Protractor】The ABS material is lightweight, hard & durable, which can prolong the service time of this protractor. Laser etched measurements offer clear readings and years' usage. It comes with a CR2032 button battery inside, you can use it directly when you receive it. We also give you an additional battery as a spare..
【High Accuracy Measure Angles Tool】Digital protractor is equipped with a large LCD display for easy reading. The accuracy is ±0.3°. The digital angle gauge supports measurement between metric(mm) and imperial(inch), making it can measure the length (0~200 mm/0~7 inch) conveniently and accurately. This angle rule allows a full range of 0~999° to measure..
【Angle Finder with Locking Function】 To read it easily, this woodworking tool could be locked at any angle, and pressing the HOLD function button will hold the reading. Zeroing button to rese....

Check Stock

Stainless Steel t Square, Incra T Rule, Edge Ruler Woodworking, Compass and Protractor Set, Multi-Function Angle Measure Tool with Wall Hanging Storage Rack(18-INCH)

FUNCTION:woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work.
PRECISION：The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 18in, and the smallest scale is accurate to 1/32in. There are 144 serrated notches and 18 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
MATERIAL：The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
T-SHAPED DESIGN: this angle measure tool is designed with t-shape, a series of precision-machined index ....

Check Stock

KAMMQI Protractor Adjustable Stainless Angle Finder Protractor for Woodworking angle Measuring Tool with 0-180 Degrees for Carpenters & Woodworking Hobbyists 20 Cm/ 7.8 Inch

【2-in-1 Design】Our woodworking measuring tool is equipped with both length and angle measuring functions, woodworkers measure angles between 0° and 180° according to the use, and draw lines precisely where they are needed. The goniometer scale is clear and accurate and can measure the length (0-20 cm/0-7.8 inches) Whether you draw lines or measure angles, it can meet your work needs at the same time, saving you time and effort..
【Adjustable Protractor Arm】Our protractor is not an ordinary measuring tool. It has a center locator and scribe function. By locking the knurled nut in the desired position, you can quickly and accurately identify angles and draw straight lines for setting miter angles, drawing radial lines, marking and cutting angles for woodworking, or any project that requires angles..
【Durable Metal Construction】High quality stainless steel ensures the longevity of the product, this adjustable woodworking edge ruler body is made of stainless steel and the goniometer dial is made of hard plastic ABS, which has good durability and wear resistance and is not easily deformed. The ruler body is 2mm thick, making it both lightweight and durable. If you are looking for an accurate and sturdy measuring tool for your home, our rou....

Check Stock

HARDELL 90 Degree Positioning Squares Right Angle Clamps 5.5\ x 5.5\(14 x 14cm) Aluminum Alloy Woodworking Carpenter Corner Clamping Square Tool for Picture Frame Box Cabinets Drawers

【Precise 90 degree angle clamps for woodworking】Our clamping square kit is made of high quality aluminum alloy and stainless steel clamps to ensure 90 degree accuracy. Anodized red surface,rust proof, durable and corrosion resistant.CNC machined for durability and years of use.
【Easy to Use】 Simply place the 90 degree positioning square in the corner of the part and secure it with a set of wooden clips. It is easy to use and the woodpeckers tools have beveled edges that won't damage fragile cutting edges, creating a perfect 90 degree angle. It's as easy as having an extra hand and greatly increases your ability to make true 90 degree angles.
【Wide Application】This 14cm carpentry right angle jig set is professionally used to assemble boxes, drawers, cabinets, frames, furniture cabinets, etc. At the same time, this clamping square for woodworking has precise graduations and can be used as a ruler. Perfect for squaring up shelf cabinets and keep a square while assembling frames, cabinets, or just about any box.
【Professional Woodworking Square Tools】 Designed to be clamped on most types of boxes to assist in leveling during the bonding process. It can be used with clamps to check and position the joints of the wood panels, and glue or ....

Check Stock

Taytools 388039 12 Inch Wooden Hand Screw Clamp for Woodworking 1 12 inch

1.ADJUSTABLE ANGLE: We provide you three different corner clamps,which can satisfied your all needs. Fits for a thickness of 5-22mm boards,uesd for....
2.EASY TO USE: The spring clamp can be operated by single hand.You can open the clamp with one hand,and the other one freely handle other workpiece,....
3.HIGH QUALITY: Woodworking clamps are made of high-quality material, which is light and not easy to damage.The stainless steel spring is smooth and....
4.WIDE APPLICATION: The angle clip are widely used, can be used for woodworking,cupboards fixing, furniture repair and photo frame repair fixing, and....
5.YOU WILL GET: The package includes 4 pcs tool handles, 4 pcs/set angle clamps(4 pcs 60 degree, 4 pcs 90 degree, 4 pcs 120 degree angle clamps), a....

Check Stock

Aluminum Stair Tread Template Tool, Stairs Treads Gauge 360°Rotating Design Adjustable Length and Angle Layout Tool Cutting Guide Tools for StairTreads, Risers, Drywall and Partition

Wide Application: The stair tread template tool can measure the length and angle of stairs. The stair gauge can meet all your needs when installing stairs, perfect for laying out wooden stair treads, wooden floors, closets,s and windowsills. Professional and easy-to-use tools for woodworking DIY or woodworking construction workers..
Easy Installation: The stair tread gauge is easy to install and easy to remove, no need to use other tools, just fix screws and knobs in the corresponding screw holes. Adjusting the tightness of the knobs is the switch to extend the length and angle of the stair gauge, easy to operate..
Flexible Angle: The scale plates of the stair gig can be rotated 360° to measure the rotation angle of the stairs, you can easily adjust the scale plates to fit any corner of the stairs, and you can also do your woodworking according to your drawing..

Check Stock

Bosch GTL3 65ft Square Laser Level for Tile and Square Layout

MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....

Check Stock

General Tools 823 Digital Angle Finder Rule, 10-Inch

PREVENT WASTE- This digital 10” stainless-steel ruler and angle finder combination tool makes precise, easy and fast measurements.
LOCK IT AND REVERSE IT- Digital protractor has lock and reverse angle functions. Place the angle rule where you need to measure your next cut, LOCK it in place with knurled locking nut, make a mark and use your miter saw to make your cut. The angle finder will automatically display the reverse angle.
MEASURE 360-DEGREES- Hinge mechanism on the angle rule allows a full range of 0 to 360-degrees to measure inside outside and reverse angles, accuracy +/-0.3 Degrees. Center check notches are on the ruler ends enables exact ruler placement marking. Display has a hold function to freeze movement for accuracy.
PICK YOUR ZERO POINT- Woodworking tool can be zeroed at any point in the swing plus the display can be inverted for easy reading.
LARGE LCD DISPLAY- Easy to read LCD display eliminates guessing or eyeballing the angle and length with one convenient protractor tool.
Power source: "CR2032" Lithium-ion battery (included).

Check Stock

GemRed Digital Level and Protractor, 2 in 1 Digital Angle Finder LCD Display, 10inch/270mm/360°Angle Gauge for Woodworking/Carpenter/Construction/DIY Tools (Black)

...roduction needs. Conversion between absolute measurement and relative measurement. Absolute measurement mode and relative measurement mode can switch freely according to demand.
【2 in 1 & Easy Used】 The Angle Finder both measure the angle and level. Calculating quickly and accurately, it’s your good partner in woodworking, construction, mechanical work and life. ☆Easy to measure all kinds of angle and draw lines.Easy calibration and Zero setting. ☆V-notch end for checking 90° degree quickly..
【Practical LCD Display】 ☆Backlit LCD Display:Large LCD display with backlight, means that you can read clearly even in a dim environment. ☆Analogue quadrant showing ☆Display always reads upright: no matter which way it is turned..
【Locking & Holding Function】 ☆Locking Function: Good locking function could lock the measurement at any angle. ☆Holding Function:Display has a hold function to freeze movement for accuracy.If you want to use data holding function, you need to press the HOLD button rather than twist the knob..
【Durable & widely use】 This angle measure tool is made of durable aluminum and has been used for many years. The angle gauge is portable and convenient, it can be used in woodworking, welding, fabrication, construction....

Check Stock

Mikego 90 Degree Clamp, Corner Clamp, Right Angle for Woodworking, 2 Pack 5.5"x 5.5" Aluminum Alloy Woodworking Corner Clamps, for Picture Frame, Cabinet, Drawers with 4 Clamps & Gaskets and Gloves

【Woodworking Precision 90 Degree Angle Clamp】Our right angle clamp square kit is made of high-quality aluminum alloy to ensure 90 degree precision. Anodized red surface, anti-rust and corrosion-resistant, CNC processing makes it more durable..
【Easy to Operate】The square jig L edge is slightly chamfered, the surface is smooth and soft, it will not scratch your hands and wooden products. Just place the positioning squares on the corners of the woodwork and secure with a set of clips to make a perfect 90 degree angle, it's easy to use and holds the pieces together..
【Woodworking Square Positioning Tool】Designed to clip onto most types of boxes to help level them during gluing or splicing. Can be used in conjunction with jigs to inspect and position plank seams and glue or weld at right angles. Right angle jigs are a great tool that can make your woodworking projects easier..
【WIDE APPLICATION】This 5.5"x 5.5"/140mmx140mm 90 right angle clip is suitable for assembly and DIY of photo frames, drawers, cabinets, photo frames, furniture cabinets, birdhouses, mailboxes, etc. Great for organizing shelvi....

Check Stock

Mikego 90 Degree Clamp, Corner Clamp, Right Angle for Woodworking, 4 Pack 5.5"x 5.5" Aluminum Alloy Woodworking Corner Clamps, for Picture Frame, Cabinet, Drawers with 4 Clamps & Gaskets and Gloves

【Woodworking Precision 90 Degree Angle Clamp】Our right angle clamp square kit is made of high-quality aluminum alloy to ensure 90 degree precision. Anodized red surface, anti-rust and corrosion-resistant, CNC processing makes it more durable..
【Easy to Operate】The square jig L edge is slightly chamfered, the surface is smooth and soft, it will not scratch your hands and wooden products. Just place the positioning squares on the corners of the woodwork and secure with a set of clips to make a perfect 90 degree angle, it's easy to use and holds the pieces together..
【Woodworking Square Positioning Tool】Designed to clip onto most types of boxes to help level them during gluing or splicing. Can be used in conjunction with jigs to inspect and position plank seams and glue or weld at right angles. Right angle jigs are a great tool that can make your woodworking projects easier..
【WIDE APPLICATION】This 5.5"x 5.5"/140mmx140mm 90 right angle clip is suitable for assembly and DIY of photo frames, drawers, cabinets, photo frames, furniture cabinets, birdhouses, mailboxes, etc. Great for organizing shelvi....

Check Stock

Digital Angle Finder Protractor Angle Measurement Tool, 2-in-1 Digital Protractor for Woodworking/Construction/DIY, Stainless Steel 360 Degree with Large LCD Display 7inch

ANGLE MEASURING TOOL: There's no more guesswork when it comes to measuring out your angles and cuts, thanks to our metal ruler. Create your layout on a flat surface, grab your slab of wood, your woodworking partner, and start the construction..
SLIDING BEVEL: Set and transfer interior and exterior angles quickly and accurately with our level tool. We make it easy for you to build cabinetry, furniture, picture frames, and other wood-inspired projects..
DIGITAL ANGLE GAUGE: Four large control buttons provide five functions, including power on/off, reading hold, read reverse angle, flip display, and clear readout. The automatic shut-off feature preserves battery life on our protractor tool..
WOODWORKING RULER: This commercial-grade digital sliding T-bevel and digital protractor with an impact-resistant ABS handle features a 360-degree stainless steel blade. The battery-powered gauge includes 1 CR2032 lithium-ion battery..
GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..

Check Stock

Multi Angle Measuring Ruler Made of Premium Aluminum Easy Angle Ruler 836 angleizer Measurement Tool General Template Tool Box Tile Flooring Gift for Men Women Xeroly Layout Tools by Bluebana

...as four-sided ruler mechanism that slides and locks into any desired angle as a reusable stencil for endless applications. No need to create a new template for each new job or remeasure the same angles over and over again, it’s perfect for precise and accurate angle measurements and Ideal to make repetitive cuts. woodworking measure angle tools gifts for diy men folding layout triangle dowel jig.
★EASIEST WAY TO MEASURE AWKWARD SHAPES: Our right angle ruler is the measure & layout tool that will save you time, money and effort, it's the ultimate ruler template tool for creating professional layouts in tile, brick pavers, lumber and any type of material, it's an essential tool for any workbench and excellent for woodworking, makes your sheetrock job much easier and an excellent gift box.
★ EASY TO USE: Its unique tightening mechanism make it easy for one-handed operations.
Measures all angles and forms. Place it onto your work area, slide the Angleizer arms into the shape needed and tighten the screws. Form the desire template and transferred it onto any material, excellent to make repetitive cuts and measurements.
It is the perfect tool to make bulls eyes, arches and plumb cuts on roof joists..
★ 1 YEAR WARRANTY: Our product quality is guarantee....

Check Stock