Top Woodriver Miter Clamps Reviews

Feiyang Miter Spring Clamps Kit for Woodworking,Picture Frames,Wood Trim,Moldings

  • When you making picture frames,moldings,wood trim work,and any compound miter,the biggest trouble in gluing up mitered corners is keeping them from....
  • You can use the miter spring pliers to easily open the sharp tip, just place the spring clamp onto the mitered corner you need to secure, then release....
  • Unlike other available spring clamps, the uniquely designed tip is designed to pierce the wood,so that there is minimal visible evidence of the clamps....
  • The miter clamps are designed with no gaps,can be applied for pocket-sized projects,and spread up to approximately 2 inches,so they will cover most....
  • Great for any compound miter. If you are a woodworking enthusiasts,contractors,carpenters or craft hobbyists,you will love this tool..
Check Stock

Collins Miter Spring Pliers and 13 Miter Clamps

  • Pliers and 13 spring miter clamps included -LIFETIME GUARANTEE.
  • Miter clamps spread from 0 to approximately 2 inches. No need to carry a bunch of different sizes.
  • Sharp point pierces the wood without cutting wood fibers vs the competitions angled cut.
  • Keeps any mitered corner from opening up while glue dries for the perfect finish.
  • Great for picture frames, moldings, trim work and any compound miter.
Check Stock

Picture Frame Miter Clamp

  • Tightens all four corners simultaneously.
  • Also used to clamp small boxes and furniture -.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....
Check Stock

WoodRiver Standard 3/4 Miter Track 32” Length

  • 3/4" x 3/8" miter track has a bottom T-profile.
  • Pre-drilled for using included screw hardware - Nominal 1/2" profile height fits dadoes or laminated jigs.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....
Check Stock

WoodRiver Miter Max Corner Clamp – Sold Individually

  • Hardened steel teeth help draw the miter joint tightly together.
  • One half turn of the corner clamp’s lever will evenly and tightly clamp casings for a perfect glue joint every time.
  • Takes the guesswork out of installing door and window casings - Features heavy gauge steel and brass.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....
Check Stock

WoodRiver Guide Rail 4 x 8 Kit

  • Two 56" Guide Rail components feature heavy-duty aluminum extrusions.
  • Guide rail component has a 2-1/8" x 1/2" profile with integral 1/4" T-tracks.
  • Guide rail connector locks together multiple guide rails to form a continuous guide.
  • Clamps swivel about the “T” shaped anchor at any angle - Guide rail clamps secure the guide rail at each end.
  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....
Check Stock

PNBO 2 Pcs 90 Degrees Positioning Squares,5.5\x 5.5\ Right Angle Clamps with 4 Clamps,Aluminum Alloy L-Type Corner Clamp Woodworking Tools,Corner Clamping Square Tool

  • New Spring Loaded Pliers and 4 spring miter clamps included - LIFETIME GUARANTEE.
  • Miter clamps spread from 0 to approximately 2 inches. No need to carry a bunch of different sizes.
  • Sharp point pierces the wood without cutting wood fibers vs the competitions angled cut.
  • Keeps any mitered corner from opening up while glue dries for the perfect finish.
  • Great for picture frames, moldings, trim work and any compound miter.
Check Stock

ZEROPLAY Miter Stop for T-Slots on Table Saws Router Tables and Band Saws.

  • Accurate miter stop that locks into the T-Track for precise stop cuts and blind rabbetting.
  • Works as an anchor for hold-downs and clamps along the miter slot.
  • Fits standard (3/4" x 3/8") T miter slots, ShopSmith and General miter tracks.
  • Make countless of small jigs just for your needs..
  • Made in the USA. 100% Satisfaction Guaranteed. 3-Year Warranty..
Check Stock

PROXXON Chop and Miter Saw KGS 80, 37160 , Green

  • For clean and safe chop and miter cuts in non-ferrous metals, plastics and wood.
  • Ideal for miter cuts, instead of swivelling the saw head, the table with clamped down work piece is turned.
  • Continually adjustable round table made of pressure-cast aluminum swivels 45 degrees in both directions with positive stops at 15 degrees intervals.
  • Integrated tightening mechanism with self-centering clamps, V-groove for round pieces, front side groove for clamping thin work pieces.
  • Scope of delivery: 1x PROXXON Chop and Miter Saw KGS 80 including carbide tipped saw blade. Part number: 37160.
Check Stock

Rockler 36'' Miter Track - Miter Slot Fits 1' x 1/2' Deep Dado & Accepts a Standard 3/4' x 3/8' Miter Bar – Premium Grade Anodized Aluminum Miter Track Slot – Comes Pre-Drilled, Countersunk w/ Four Holes

  • Rockler 36'' Miter Track Bar: Our 36” inch miter slot track expands the use of the router table by providing the use of many sleds, clamps, jigs, and other woodworking devices..
  • Perfect Application: Set up your jigs, fixtures, and shop-made router tables for a perfect smooth-sliding miter gauge. This is the ultimate table saw miter track to build your own custom table saw or router table..
  • Perfect Size: The track fits into a 1" x 1/2" deep dado and accepts a standard 3/4" x 3/8" miter bar. Adjusts for perfect sliding action in any standard miter gauge track with just a twist of the wrist..
  • Durable Material: Our woodworking jig miter slider is constructed of 100% aluminum for excellent durability without the weight..
  • Easy Install: For fast, trouble-free installation, the miter slot gauge comes pre-drilled and countersunk with four holes for #6 mounting screws (not included)..
Check Stock

O SKOOL Miter Max Corner Clamp for Woodworking Making Window Casing Making Door Casing Crafting Projects

  • Turn one-half turn of the handle, the pins will insert into the wood with rotation, make sure the wooden junction connected tightly for holding miters....
  • This miter clamp is made from heavy gauge steel and solid brass. The rustproof and rugged construction ensures these clamps will be reliable for a....
  • The pins on the miter clamp bite into the wood to keep it in place. It does leave a few dimples in the edge of the wood, but so would spring clamps or....
  • The jig's unique cam design exerts such pressure on mitre joints that wood piece can be hauled around by one leg immediately after gluing. You get a....
Check Stock

48 Inch T-Track - Miter Saw T-Track Stopper Track for Woodworking by Clear Style Profile NOT Including Stopper and Ruler

  • LIFE TIME WARRENTY - PROVIDING YOU WITH THE ACCURATE SIZE FOR YOUR CUTS.
  • SAVING COSTS - PREVENT CURRING ERRORS, MITER SAW STOP T-TRACK for JIG SAW - PACKAGE CONTAINS 1 unit of 48 inch T TRACKS.
  • WORKS WITH HOLD DOWN CLAMPS AND STOPPING BLOCKS.
  • THE RULER AND STOPPING BLOCKS PURCHASE SEPARATE, PERFECT use for hold-down Clamps measuring either 5-1/2 x 1-1/8-inch or 3-1/2 x 3/4-inch..
  • ORDER NOW!!! 100% SATISFACTION GUARANTEE: If you don't love our MITER SAW TRACK - please return for a 100% refund,.
Check Stock

Spring Miter Clamp Set

  • WoodRiver is proudly made by Woodcraft, America’s leading supplier of saws, planes, power tools, hand tools, wood stain and paint, routers, sanding,....
Check Stock