Top Woodpecker Edge Ruler Woodworking Reviews

HTTMT- 20 Woodworker Edge Ruler 0-70°Adjustable Protractor Angle Finder Two Arm Carpentry Ruler Measure Layout Tool [P/N ET-TOOL041-20-RAW]

【Multi-function】HTTMT woodworking protractors & ruler is a 2-in-1 device Compatible With length and angle measuring / drawing..
【High Accuracy】The ruler tool can be adjusted from 0° to 70°, and every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle....
【Simple Operation】You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Even if....
【Easy Storage】Each woodworking ruler is equipped with a wall-mounted storage rack, which makes it easy to store..

Check Stock

Stainless Steel t Square, Incra T Rule, Edge Ruler Woodworking, Compass and Protractor Set, Multi-Function Angle Measure Tool with Wall Hanging Storage Rack(18-INCH)

FUNCTION:woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work.
PRECISION：The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 18in, and the smallest scale is accurate to 1/32in. There are 144 serrated notches and 18 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
MATERIAL：The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
T-SHAPED DESIGN: this angle measure tool is designed with t-shape, a series of precision-machined index ....

Check Stock

YOUNGL Woodworking Scribe TS 3 Center Finder T Type Ruler Gauge Crossed-Out Tool Aluminum Alloy Measuring for Carpenters Portable Durable Manual t Marking Hole Scribing(TS-8Red)

【Precise Marking T Rule】 Precise marking t-rule helps you draws perfect horizontal lines while sliding the rule along the edge of your work, Accurate calibration and convenient operation.
【Convenient to Use】T Type Shape: T type design, easy to operate and portable to use. The marking ruler is precise, versatile, and easy-to-use. Find the hole corresponding to the scale, insert the pen into the hole, and draw the desired line.
【Function】follows the edge of your work piece to mark perfectly placed horizontal or vertical lines, micro-fine marking holes and slots place your mark exactly on target, makes the woodworking ruler a perfect tool for you..
【Material & Anodic Oxidation】Made of aluminum alloy 6067 material, is wear-resistant, rust-proof, durable and hard to break. Surface anodic oxidation CNC tool processing.
【Compact Size】the ruler size is 107x88x58x20 mm,mini line ruler easy to carry and easy to use. Suitable for home DIY, woodworking measuring tool, etc...

Check Stock

JINYEEZY Precision Pocket Ruler Woodworking Machinist Engineer Ruler Construction Rulers Inch Ruler Millimeter Ruler Professional Woodworking Ruler (8 inch)

[HIGH-QUALITY MATERIAL] Our pocket ruler is made of high-quality stainless steel, sturdy structure, durable, stainless steel and corrosion-resistant..
[RULER UNIT] The best ruler has imperial and Metric graduations. There are three standard 12"/30 cm, medium 8"/20 cm and 6"/15 cm rulers..
[EASY TO USE] Provide a highly accurate measurement reference, and quickly and easily set up your woodworking ruler accessories for professional carpentry. It is also compact, easy to carry, and can also be hung on the wall for easy storage. It mostly to make edge markings and for repeatability since the slide locks securely with the 2 knurled knobs..
[CLEAR SCALE] The woodworking ruler is displayed by black and white scale bars. The scale can be clearly seen at a glance. It is designed under strict quality guidelines and excellent craftsmanship to ensure highly accurate and precise measurement marks to obtain consistent and reliable results..
[WIDE APPLICATION] It is a good helper for engineers, designers, and architects. It can be used as a good measurement tool for them, suitable for offices, schools, buildings, etc..

Check Stock

JINYEEZY Precision Pocket Ruler Woodworking Machinist Engineer Ruler Construction Rulers Inch Ruler Millimeter Ruler Professional Woodworking Ruler (6 inch)

[HIGH-QUALITY MATERIAL] Our pocket ruler is made of high-quality stainless steel, sturdy structure, durable, stainless steel and corrosion-resistant..
[RULER UNIT] The best ruler has imperial and Metric graduations. There are three standard 12"/30 cm, medium 8"/20 cm and 6"/15 cm rulers..
[EASY TO USE] Provide a highly accurate measurement reference, and quickly and easily set up your woodworking ruler accessories for professional carpentry. It is also compact, easy to carry, and can also be hung on the wall for easy storage. It mostly to make edge markings and for repeatability since the slide locks securely with the 2 knurled knobs..
[CLEAR SCALE] The woodworking ruler is displayed by black and white scale bars. The scale can be clearly seen at a glance. It is designed under strict quality guidelines and excellent craftsmanship to ensure highly accurate and precise measurement marks to obtain consistent and reliable results..
[WIDE APPLICATION] It is a good helper for engineers, designers, and architects. It can be used as a good measurement tool for them, suitable for offices, schools, buildings, etc..

Check Stock

Ludwig Precision 48\ Center-Finding Aluminum Straight Edge, 81248

48" LENGTH – Aluminum metal ruler is a straight edge that is a durable tool for measuring and drafting.
QUICK AND EASY CENTER MEASUREMENTS – Save time and effort calculating the exact center of 2 points with this handy tool. Perfect for crafting, framing, embroidery, drawing, drafting and even rotary woodworking using salvaged lumber.
EXTRUDED ALUMINUM CONSTRUCTION – Ruler is made from high-quality extruded aluminum for accurate measuring and drafting.
INCH CALIBRATIONS – Aluminum metal ruler is calibrated inches.
QUALITY IMPRINTING – Center-Frinding drafting straight edge features large numbers that are printed using precise imprinting techniques that will not rub off over use and time, rulers is printed with large numbers for fast and easy-to-read measurements.

Check Stock

Ludwig Precision 24' Center-Finding Aluminum Straight Edge, 81224

24" LENGTH – Aluminum metal ruler is a straight edge that is a durable tool for measuring and drafting.
QUICK AND EASY CENTER MEASUREMENTS – Save time and effort calculating the exact center of 2 points with this handy tool. Perfect for crafting, framing, embroidery, drawing, drafting and even rotary woodworking using salvaged lumber.
EXTRUDED ALUMINUM CONSTRUCTION – Ruler is made from high-quality extruded aluminum for accurate measuring and drafting.
INCH CALIBRATIONS – Aluminum metal ruler is calibrated inches.
QUALITY IMPRINTING – Center-Frinding drafting straight edge features large numbers that are printed using precise imprinting techniques that will not rub off over use and time, rulers is printed with large numbers for fast and easy-to-read measurements.

Check Stock

Carpenter Square, 7-inch Aluminum Square+ 2Pcs Woodworking pen Rafter Carpenter Triangle Square Pressional Easy-Read Layout Tool framing square (Aluminum)

[HIGH-QUALITY MATERIAL] Our pocket ruler is made of high-quality stainless steel, sturdy structure, durable, stainless steel and corrosion-resistant..
[RULER UNIT] The best ruler has imperial and Metric graduations. There are three standard 12"/30 cm, medium 8"/20 cm and 6"/15 cm rulers..
[EASY TO USE] Provide a highly accurate measurement reference, and quickly and easily set up your woodworking ruler accessories for professional carpentry. It is also compact, easy to carry, and can also be hung on the wall for easy storage. It mostly to make edge markings and for repeatability since the slide locks securely with the 2 knurled knobs..
[CLEAR SCALE] The woodworking ruler is displayed by black and white scale bars. The scale can be clearly seen at a glance. It is designed under strict quality guidelines and excellent craftsmanship to ensure highly accurate and precise measurement marks to obtain consistent and reliable results..
[WIDE APPLICATION] It is a good helper for engineers, designers, and architects. It can be used as a good measurement tool for them, suitable for offices, schools, buildings, etc..

Check Stock

ADD AN INCH TOOL, Measuring tool for exact measurements in corners, accurate level marking and locks for repeated marks.

【MULTIFUNCTION 3D SADDLE SQUARE 】There are over 10 functions for this woodworking tool: three-dimensional marks, 45°angel and 90°angel limit stop, Dovetail Template, marking gauge for parallel lines, drill gauge, ruler for vertical line and parallel line, T-shaped Scribe, Protractor. 10 in 1 design, this multifunctional 3d carpenters square is more convenient for engineers and carpentar..
【PREMIUM MATERIAL ANGLE RULER】The t square woodworking ruler are made of high-quality aluminum alloy. The real material is non-deformable, anti-drop, anti-corrosion. Compared with other universal angle ruler, 3d square woodworking tools is more durable and longlasting. Even using it for drilling positioning, it still works well and would not break. Also with the fine polishing surface, angle ruler woodworking is comfortable in your hand..
【ACCURATE MEASUREMENT】Laser engraved marking makes the number embedded in aluminum material, so T square ruler will not wear out and never fade.With clear engraving metric scales, Aweohtle t square ruler is accurate and easy to read. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree angles.With 45°& 90°limit stop and 0-90° scale, aluminum angle ruler could allow you t....

Check Stock

Aweohtle Aluminum Alloy Woodworking Square, 3D Mitre Angle Measuring Tool, 45/90 Degree Woodworking Saddle Layout Square for Engineer, Carpenters, Woodworking Gifts

【MULTIFUNCTION 3D SADDLE SQUARE 】There are over 10 functions for this woodworking tool: three-dimensional marks, 45°angel and 90°angel limit stop, Dovetail Template, marking gauge for parallel lines, drill gauge, ruler for vertical line and parallel line, T-shaped Scribe, Protractor. 10 in 1 design, this multifunctional 3d carpenters square is more convenient for engineers and carpentar..
【PREMIUM MATERIAL ANGLE RULER】The t square woodworking ruler are made of high-quality aluminum alloy. The real material is non-deformable, anti-drop, anti-corrosion. Compared with other universal angle ruler, 3d square woodworking tools is more durable and longlasting. Even using it for drilling positioning, it still works well and would not break. Also with the fine polishing surface, angle ruler woodworking is comfortable in your hand..
【ACCURATE MEASUREMENT】Laser engraved marking makes the number embedded in aluminum material, so T square ruler will not wear out and never fade.With clear engraving metric scales, Aweohtle t square ruler is accurate and easy to read. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree angles.With 45°& 90°limit stop and 0-90° scale, aluminum angle ruler could allow you t....

Check Stock

Woodworking Ruler Precision Pocket Rule - 12, 8, 6 Inch Metal Slide Stop Marking Ruler Metric Inch Measuring Wood Working Scribing Rulers Measure Tools - Engineers Woodwork Adjustable Sliding Ruler

✎PRECISION MEASURING: The pocket ruler are wide and the slide square enough to the rule to make for accurate measurements on any drafting, The woodworking ruler are very handy for accurately placing cutting, The adjustable sliding mechanism locks down nice and tightly and allows you to make an easy measurement on the surface, The two thumb screws keep the slide secured and don't tend to loosen during use.
✎THICK AND DURABLE: The straight edge metal procket rulers is made of top aluminum alloy, The measuring ruler are not flexible, 1" wide, 5/32" thick, and have a nice black matte finish on them, machining, lettering and finish are excellent, good for marking, scribing lines.
✎CLEAR SCALE: The woodworking rulers are easy to read, and work very smoothly, pocket size, both inch and metric, laser etched, permanent grooves that will never fade.
✎VERTICAL SCALE & NOTCH: You can use the end vertical scale 1/4-3/4 inch to measure the height of your table router bit, or your table saw blade, There's a small notch in the end for a pencil to keep it in place while dragging the rule to make an alignment ....

Check Stock

4 Pcs Set Radius Jig Router Templates, Radius Quick Jig for Woodworking, High Hardness ABS+CNC Jig Radius Corners R5 R10 R15 R20 R25 R30 R35 R40

【What You Get】4 Pcs Router Templates for Woodworking, Each Radius Jig Router Includes 8 Types of Corner R5 R10 R15 R20 R25 R30 R35 R40..
【Premium Materials】Each Woodpecker Router Jig is made of ABS+CNC high hardness processing glue, sturdy and durable..
【Professional Router Templates】Corner Radius Routing Templates Set allows you to efficiently trim the outer diameter of the corners and corners of the wood. It is an ideal choice for woodworking trimming of tables, chairs, photo frames, and corners of wood..
【Easy to Use】 Use our Router Templates for Woodworking Router Edge Guide to cut the ideal outer radius, making your work simple, fast and efficient..
【Safety Design】Routing Rounded Corners Router Bit Templates, an ergonomic three-hole fixed design, makes it easier to stabilize the fixture, and effectively protects your hands from the injury of the Trim Router Bits..

Check Stock

Mr. Pen - T Square, T Ruler, 12 inch Metal Ruler, T Square Ruler, Drafting Tools, Architect Ruler, Set Square, Drafting Ruler, Tsquare, Truler, Architectural Triangle, Tee Ruler, L Square, Scale Ruler

【MULTIFUNCTION 3D SADDLE SQUARE 】There are over 10 functions for this woodworking tool: three-dimensional marks, 45°angel and 90°angel limit stop, Dovetail Template, marking gauge for parallel lines, drill gauge, ruler for vertical line and parallel line, T-shaped Scribe, Protractor. 10 in 1 design, this multifunctional 3d carpenters square is more convenient for engineers and carpentar..
【PREMIUM MATERIAL ANGLE RULER】The t square woodworking ruler are made of high-quality aluminum alloy. The real material is non-deformable, anti-drop, anti-corrosion. Compared with other universal angle ruler, 3d square woodworking tools is more durable and longlasting. Even using it for drilling positioning, it still works well and would not break. Also with the fine polishing surface, angle ruler woodworking is comfortable in your hand..
【ACCURATE MEASUREMENT】Laser engraved marking makes the number embedded in aluminum material, so T square ruler will not wear out and never fade.With clear engraving metric scales, Aweohtle t square ruler is accurate and easy to read. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree angles.With 45°& 90°limit stop and 0-90° scale, aluminum angle ruler could allow you t....

Check Stock