Top Wood Stove Fan No Electricity Reviews

Fireplace Fan Heat Powered Stove Fan 4 Blade Wood Stove Fans Aluminium Silent Eco-friendly for Wood Log Burner Fireplace

  • Heat powered: Heat powered wood stove fans generate power by converting the heat from stove into electricity, electricity generating units convert the heat energy into kinetic energy to drive the motor, then the blades spin.No batteries or electricity required, eco-friendly..
  • 4-blade, large air volume: Upgrade 4 blades, diffuse warm air throughout the whole room. Just place the stove fan on a smooth flat surface of your stove top ,near the side or back of the stovepipe. Need to place stove fan at least 4" away from stovepipe. It will work when the stove surface hot..
  • 50°C(122°F)-340°C(644°F) working temperature: The fan spins when the temperature is reached 50°C(122°F).The hotter the base of the fan gets, the faster the fan turns, and the more air the fan circulates into the room. It will slow down and stop as the stove cools..
  • Anodized aluminum material: The whole fan is made from anodized aluminum, which will not rust or corrode when the fan is getting hot..
  • Quiet, no noise: The only moving part is the blade assembly, quiet and no noise generate. You will not even know this fan is there, but you will feel the warmth..
Check Stock

COMBIUBIU Dual Head 8 Blade Fireplace Fan Upgrade Heat Powered Stove Fan Wood Burner Eco Friendly Fan Home Efficient Heat Distribution

  • ✅Double Stove Fan:Upgrade 8 blades, double motors, blow wind up to 430 ft/m, air flow range up to 430CFM, diffusing warm air throughout the whole room. Circulating 50% more warm air than standard 4-blade fan..
  • ✅Heat Powered: Heat powered wood stove fans generate power by converting the heat from stove into electricity, electricity generating units convert the heat energy into kinetic energy to drive the motor, then the blades spin.No batteries or electricity required, eco-friendly..
  • ✅Anodized Aluminum Material &Over Heat Protection: The whole fan is made from anodized aluminum, which will not rust or corrode when the fan is getting hot. There is iron sheet on the stove fan bottom, well protect fan from damage due to high temperature..
  • ✅Slient Operation: As the stove warms up, the wood fireplace Stove fan runs faster and faster, distributing the heat to the far corners of the room. And even at top speed, there is hardly a whisper. It's almost totally silent..
  • ✅Quality After-Sales Service:The frequently asked questions can be found on the USER GUIDE, if still any questions or complaints during uses, just contact us directly for solutions. COMBIUBIU always stand behind products..
Check Stock

VODA Newly Designed Heat Powered Stove Fan with 2 Motors Larger Air Flow about 360CFM Eco Fan for Wood Burning/Log Burner Fireplace Perfect for Large Rooms

  • ...ad thermal current,so it disperse heat from the stove more efficiently and raise the temperature of your room quickly.Circulates about 350~380CFM, perfect for large space..
  • 【Eco Friendly】Heat powered wood stove fans generate power by converting the heat from stove into electricity, electricity generating units convert the heat energy into kinetic energy to drive the motor, then the blades spin.No batteries or electricity needed, environment-friendly..
  • 【Stable and Durable】Stable triangle base makes the stove fan standing more steadily. The stove fan base and blades are made of anodized aluminum, which makes the fan will not rust or corrode,it is durable enough for a long time use..
  • 【Whisper and Quiet】The noise is less than 25db, the only moving part is the blade assembly,which makes the wood stove fan almost totally silent even at top speed.You even do not know the fan is there, but you will still feel the warmth..
  • 【Overheating Protection】The stove fan comes with a bi-metallic safety device at the base.When the surface temperature rises above around 300 degree Celciu....
Check Stock

VODA Wood Stove Fan Small New Designed 4 Blades Heat Powered Fireplace Fans Eco Fan for Home Wood/Log Burner/Fireplace Black

  • 【Heat Powered】This small wood stove fan is a perfect addition to every home that has a wood stove. No batteries or electricity required, but....
  • 【Easy to Use】No assembly required, you only need to place this mini stove fan on a smooth flat surface of your stovetop, the stove fan will....
  • 【Operating temperature】The working temperature of this wood stove fan is 85-350°C. It starts spinning when the temperature gets around 55°C, and....
  • 【Whisper and Quiet】The noise level of the eco fan is less than 25db, the only moving part is the blades,which makes the wood stove fan almost....
  • 【Overheating Protection】The stove fan comes with a bi-metallic safety device at the bottom.When the surface temperature rises around 250-300°C,....
Check Stock

Weyderk Wood Stove Fan Heat Powered, 5 Blades Non Electric Ecofan, Thermoelectric Fireplace Cocoon fans for Log/Wood/Pellet Buring stoves, Save Fuel&Efficient Heat Transfer (With Thermometer)

  • ...ration even after a long time working under high temperature..
  • 【Non Electric Fan/Ecofan】 The heat powered fan converts heat energy from the stove surface into kinetic energy to spin, and adjust its speed automatically with the stove surface temperature. No batteries or electricity is required. Working Temp is 150F-662F..
  • 【Ultra Quiet Cocoon Fan】 Newly designed blade, larger air volume, lower noise. The noise level of this cocoon fan for wood stove heat-powered is less than 25 dB. You will hear virtually no sound at all. Satisfy you to enjoy warmth and comfort in a quiet environment..
  • 【Safety design Stove Fans non Electric】 The wood stove fan comes with a bimetallic safety device in the base of the stove fan. When the surface temperature rises above around 482°F(250℃), it will gently lift the front of the fan to protect the TEG and motor. The fan will automatically recover normally as the surface temperature decreases..
Check Stock

Wood Stove Fan 6 Blades Heat Powered Stove Fan with Thermometer Stove Fans Non Electric for Log Burner/Burning/Wood Burner Stove Quiet Motor Circulating Warm Air Saving Fuel【upgrade】

  • 【2021 Upgrade 6-Blade Stove Fan】Our OCHOR stove fan composed of 6 blades,can produce more warm air and improve the efficiency of the product. It....
  • 【No electricity】 The stove fan no need electricity or battery,powered by heat. Healthy and economical,Wood Stove Fan for Log Burning....
  • 【Whisper Quiet】Newly designed blade, larger air volume, lower noise. The moving part is the blades assembly, so the working noise is below 32DB.....
  • 【Start automatically】Start work when the surface temperature under the fan reaches around 50℃(122℉),working with a temperature between....
  • 【More efficiency】Fully utilize the heat from your wood stove and disperse it to your room. The 6-Blades fan circulates warm air at a rate of 290....
Check Stock

Heat Powered Wood Stove Fan, Vodche 4 Blades Fireplace Stove Fan, Large Airflow 50% Fuel Cost Saving, Eco Stove Fan for Gas/Pellet/Wood/Log Burner/Fireplace, with Hanging Hook, Black

  • 【Heat Powered, No Electricity, Automatic Working】The stove fan does not require additional electricity or batteries, and is powered by heat. Put the stove fan on the stove steadily. When the fan base is heated to 158°F (70°C), the fan will automatically start and work normally. As the stove heats up, the fireplace fan runs faster. Effectively dispersing warm air around your room. It's a real energy saving and eco friendly wood stove accessories in winter..
  • 【Temperature Label Added, Upgraded Overheat Protection】We have added a thermal temperature label on the top of the heat powered stove fan to real-time monitor the surface temperature of the fan radiator. Together with the magnetic stove thermometer that we presented to you in the package, double protection of your fireplace fan. (Note: The normal working environment temperature of the stove fan: 158°F-653°F).
  • 【Silent Running, Low Noise(<32dB)】The newly designed blade surface is polished to reduce resistance. The upgraded motor allows the stove fan to running more smoothly, stably, quietly and comfortably. While ensuring the wind speed, this stove fan works with a low noise of less than 32dB, providing you with a quiet guarantee for reading and working, and filling the warm air aroun....
Check Stock

Signstek 4 Blades Heat Powered Wood Stove Fan for Wood/Log Burner/Fireplace/Heater, Non Electric, Quiet, Eco Friendly Black Stove Fans, Circulating Warm Air Saving Fuel, Upgrade Design

  • ...n, smooth and super quiet, the noise of the wood stove fan is less than 25db when operating. Longer service life and environmental protection. Effectively evenly distribute warm air throughout the room, reducing the fuel burned for you in the cold day..
  • 【No Additional Running Costs】Heat powered - no batteries or electricity required, the stove fan is powered by heat from the fireplace or wood burning stove, the fireplace fan automatically adjusts its rotation speed with the temperature of the surface of the stove..
  • 【Overheating Protection】 To protect the motor and the thermoelectric module, the In-built Bi-metallic strip at the base of the stove fan will raise the edge of the fan slightly when the maximum operating temperature is approached. The wood fireplace fan can withstand normal surface temperature between 140℉ to 653℉ (60℃ to 345℃) on freestanding wood stoves..
  • 【Small and Exquisite】 Compact design! Compact size 7.67” x 3.54” x 2.2” makes our stove fan easier to locate on the stove, even the embedded fireplace. Widely used for wood burning stove, fireplace, gas stove, pellet stove and heater..
Check Stock

TCFUNDY Wood Stove Fan, 6 Blades Heat Powered Fireplace Fan for Wood Burning Stove, Eco Stove Fans Warm Air Circulation for Home Wood/Log Burner/Fireplace

  • 【Non-Electric & Heated Powered Fireplace Fan】 TCFUNDY stove fan is an Eco-friendly fireplace fan for wood burning stove. It uses thermoelectric technology to power, the stove fan will automatically rotate with the temperature getting higher, no batteries or electricity required. Not only warm your room faster, it also saves the fuel consumption and your bills..
  • 【Upgraded 6-Blades Wood Stove Fan】The heat powered stove fan is equipped with 6 blades for softer wind, greater airflow and faster speed. This design is designed to effectively circulate warm air throughout the room. You just need to place this stove fan on flat surface of the stovetop. The optimum operating temp is 80℃-250℃ (176℉-482℉), DO NOT over 350℃ (662℉)..
  • 【Overheating Protection】Our stove fan has built-in high temperature protection at the base of the fan. The safety device gently raises the front of the fan to protect the TEG and the motor If the surface temperature exceeds 300°C..
  • 【Low Noise Operation】 This heat powered stove fan with less than 25db noise, provide a quiet and comfortable environment. Use stove fan for wood b....
Check Stock

Wood Stove Fan Heat Powered, 12 Blade Fireplace Fan Non-Electric, Thermoelectric Fan EcoFan for Wood Burning Stove/Pellet/Log Burner (with Accessories Magnetic Thermometer), Dual Motors

  • 【Heat Powered Stove Fan】 This wood stove fan doesn’t require any external power or electricity, it uses thermoelectric technology to push warm air escaping into the room, which not only helps you warm home but also lowers the fuel consumption of log burner. You just need to put the stove fan on a flat surface of stove top.
  • 【Double stove Fan】The 12-blade Heat Powered Stove Fan distributes heat more evenly, so you get more heat where you need it.
  • 【Overheating Protection】The cocoon fan has an inbuilt bimetallic safety device at the base. This bimetallic safety device gently lifts the front of the fan once the temperature crosses 644°F/340°C in order to protect the motor and electricity generating unit. And the speed of the fan will also indicate whether need to add logwood.
  • 【Silent Operating】This wood stove eco fan with a noise level of less than 25 dB, gives you a peaceful atmosphere. The thermal fan is designed to be used with coal, pellet or wood burning stoves, can improve circulation of warm air.
  • 【Quality After-Sales Service】The package includes a stove fan and a free magnetic thermometer. Please place the heat stove fan next to the chimney (allowing about 15cm of space behind the fan), so that the fan pushes the warm air o....
Check Stock

TCFUNDY Wood Stove Fan Heat Powered, 8 Blades Fireplace Fan for Wood Burning Stove, Eco Stove Fans Air Circulation Heating for Gas/Wood/Log Burner Stove, Dual Motors

  • 【Non-Electric & Heated Powered Fireplace Fan】 TCFUNDY stove fan is an Eco-friendly fireplace fan for wood burning stove. It uses thermoelectric technology to power, the stove fan will automatically rotate with the temperature getting higher, no batteries or electricity required. Not only warm your room faster, it also saves the fuel consumption and your bills..
  • 【Dual Motors Wood Stove Fan】The heat powered stove fan is equipped with 8 blades for softer wind, greater airflow and faster speed, double motors design for distributes heat more evenly, effectively circulate warm air throughout the room. You just need to place this stove fan on flat surface of the stovetop. The optimum operating temp is 80℃-250℃ (176℉-482℉), DO NOT over 350℃ (662℉)..
  • 【Overheating Protection】Our stove fan has built-in high temperature protection at the base of the fan. The safety device gently raises the front of the fan to protect the TEG and the motor If the surface temperature exceeds 300°C..
  • 【Low Noise Operation】 This heat powered stove fan with less than 25db noise, provide a quiet and comfortable environment. Us....
Check Stock

OCROUKI Heat Powered Stove Fan, 4 Blades Wood Stove Fan,Silent Heat Powered Fireplace Fan,No Electricity Required,for Gas/Pellet/Wood Log Burner Fireplace

  • ...ill help reduce the fuel consumption and make the room warmer quickly.Spread heat around room and increase temperature, improve warm air circulation results in greater comfort and reduce wood consumption from your stove..
  • 【No Power Required】 - Fireplace fans powered by heat.The wood pellet fan converts heat into electricity by means of a heat-conducting plate at the bottom to achieve rotation.No fire hazards. And the fireplace fan automatically adjusts its rotation speed with the temperature of the surface of the stove..
  • 【Very Silent】 - The only moving part is the blade assembly.The noise of the silent heat powered wood stove fan is less than 25db, you don't even know where the fan is, but you still feel warm.You can enjoy the warm air in a quiet and comfortable environment.(Please do not touch it directly with your hands when running work.).
  • 【Upgraded 4-Blade】 - Heat powered stove fans are widely used in wood-burning stoves, gas stoves, pellet stoves, etc. The recommended surface temperature is between 122°F-644°F (50°C-340°C).No assembly is required, just place the fireplace fan on top of the furnace and the heat fan will spin as the temperature rises..
  • 【NOTE】 - This unique stove fan is designed to be placed on your wood stov....
Check Stock

VODA Wood Stove Fan 5 Blades Newly designed Small Heat Powered Fans Fireplace Eco Fans for Wood/Log Burner/Fireplace(Black)

  • ...he only moving part is the blades assembled, which makes the wood stove fan almost silent even at the highest speed. You even do not know the stove fan is there, but you will still feel a breeze, but not wind from the fireplace fan..
  • 【Energy Saving】No batteries or electricity required. This wood burning fan is driven by energy generated from the heat of your stovetop.The fan will starts spinning automatically as the stove temperature hits a certain range. The hotter the stovetop is, the faster the fan rotates..
  • 【Operating temperature】The working temperature of this wood stove fan is 85-350°C.It starts spinning when the temperature gets around 55°C, and works most efficiently when the temperature gets around 200-300°C. But please avoid using the fan at high temperature continuously for a long time. Kindly note that he working efficiency will be various as per your stovetop temperature..
  • 【Overheat Protection】The in-built metallic strip at the base of the stove fan is designed to raise the edge of the fan slightly when the maximum operating temperature is approached to protect the TEG unit and the fan. And ....
Check Stock