Top Wood Saw Machinery Reviews

4 x 20’ Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

Medical Electric Plaster Saw Cast Cutter Orthopedic Sports Medicine 110V 12500rpm/min one set of plaster saw

  • The electrical machinery uses the double insulation protective device, has guaranteed the safety of patient.
  • Anti-shock type, degree and protection against harmful into the liquid level points: medical saw is II type.B is common tyoe.
  • Divided by the work of system: medical electric plaster saw is running short.
  • The electrically operated gypsum saws through the saw blade swinging sawing gypsum, in use, even if the saw blade will contact the patient skin not to create cuts.
  • Scope of application: the orthopedic products for fixed reset, remove the plaster bandages used.
Check Stock

2.5\ x 10' Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

2 1/2 x 20 Clear PVC Dust Collection Hose For Use with Dust Collectors with 2-1/2 Ports Ideal for Shop Vacuums

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

4 inch diameter x 10 foot long Ultra Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

YUNVI 48 Pieces High Hardness Diamond Chainsaw Sharpener Wheel Kit Titanium Plated Burr Grinding Stone File Mini Chainsaw Chain Sharpening Stone Grinder Tool Sharpener Wheel (5/32'', 3/16'', 7/32'')

  • Material: These Chainsaw Sharpeners are made of titanium plated emery grain, which is study and durable, not easy to break. The particles on the chain saw head are full and evenly distributed to ensure steady and efficient sharpening of the chainsaw..
  • Size: Our Chainsaw Sharpeners are 3 sizes, 5/32'' wheels for Electric chainsaw and other small blade, 3/16'' wheels for small oil chainsaw, 7/32'' wheels for large oil chainsaw. Different sizes are convenient for you to use and replace in your daily life.
  • Easy to install: The chain saw sharpeners are easy to install and can be polished without removing the chain, saving time and effort, and helping you improve work efficiency..
  • Wide Application: These Diamond Chainsaw Sharpeners are widely used in machinery, bearings, metal polishing, chain saws, molds, jade, wood, solder joints, weld grinding, burr grinding, etc..
  • Package Includes: There are 3 sizes, each with 16, a total of 48pcs mini chainsaw sharpener. Enough quantity is available for you to replace and use..
Check Stock

3 Pieces Reciprocating Saw Blades Wood Pruning Saw Cutter Includes 6 /6TPI 9 /6TPI 9.5 /5TPI Saw Cut HCS High Carbon Steel Reciprocating Saw Set for Cutting Wood Plastic

  • The package contains: HCS high-carbon steel reciprocating saw set contains 3 sizes of saw cutter, including 6"/6TPI saw cutter, 9"/6TPI saw cutter,....
  • Material: this saw cut set is a high carbon steel saw cutter with high strength and hardness, high elastic limit and fatigue limit, and strong cutting....
  • S644D model saw: 6"/6TPI (150 mm/ 4 mm), suitable for cutting construction wood (6 - 100 mm), wood board (.
  • S1111DF model saw: 9"/6TPI (225 mm/ 4 mm), suitable for cutting wood with metal or nails, wood chipboard (10 - 100 mm), plastic profile (φ5-175 mm),....
  • S1531L model saw: 9.5"/5TPI (240 mm/ 5 mm), suitable for fast cutting rough wood, garden wood (φ15-150 mm).
Check Stock

5\ x 10' (5 inch diameter by 10 feet long) Ultra-Flex Clear Vue Heavy Duty PVC Dust, Debris and Fume Collection Hose - MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

6 x 10 6 inch diameter by 10 feet long Ultra-Flex Clear Vue Heavy Duty PVC Dust Debris and Fume Collection Hose - MADE IN USA!

  • ...plications where dust and chips from cutting, milling or sanding wood is a problem. This heavy-duty hose will stand up to small and large chunks of wood without getting punctured as well as handle the smallest of saw dust without leaking. PVC hose can be used as a primary line or can be plugged into and out of machinery as needed..
  • PVC Hose (depending on diameter) can be used with dust collectors, shop vacuums, industrial vacuum systems, lawn tractor leaf catchers and a whole lot more! Simply make sure both ends of the hose are secured with hose clamps and your ready to go. The PVC hose flexes enough to weave in and out of shop machinery or table legs without kinking. Its also sturdy enough that it won’t flatten out when the dust collector is turned on. The hose has a compression ratio of 3: 1..
  • This PVC hose is clear which allows you to see what’s going on inside the hose while the dust and debris are flowing through it. Not only can you see the dust and debris, you can also see if any build up or blockage has occurred. Being able to see this makes fixing any suction issues with the hose much easier than typical opaque hoses..
  • While PVC Hose can be used on other machinery or devices it has been designed for dust collection purposes. The hose t....
Check Stock

CRAFTSMAN 7-1/4-Inch Circular Saw Blade, 24-Tooth Carbide, 3-Pack (CMAS3725243)

  • ★ 【 Founded in California in 2010 】 - Hanida is one of the earliest R&D teams for wood reciprocating saw blade products. In 2010, the company launched the world's first wood reciprocating saw blade with wear resistance, heat resistance and super hard properties. This is a unique new metal material material technology..
  • ★ [ Package Includes and Application ] - 5 x 9" 5TPI, 7 x 6" 6TPI reciprocating saw blade. Different sizes to meet your different needs. 0.059 inch ultra-thick thickness is used for extreme applications. Our reciprocating pruning saw blades are suitable for outdoor garden pruning, wood cutting, tree pruning and plastic pipe cutting. can cut rough/burning wood and other wood with a thickness of 0---6.89inch..
  • ★ [ Rugged and durable ] - High-quality CRV heat treatment makes our saw blades very suitable for wood and trimming tools, and has a service life of more than 2 times that of ordinary HCS reciprocating saw blades. Our wood pruning reciprocating saw blade has excellent pruning ability, fast cutting speed, long service life, accurate and smooth cutting, very labor-saving..
  • ★ [ Universal Handle ] - Hanida pruning blades are suitable for all brands of reciprocating saw tools, such as Milwaukee serrated saws, DeWalt, Bosch, Mak....
Check Stock

Bora!

  • SAW-HORSE SOLUTION - made of heavy duty steel construction, The centipede is a foldable work stand that can be set up as a large portable workbench at any job site.
  • COMEPLETE KIT - The full set comes with the following accessories: 4 quick Clamps to keep your materials firmly in place, 4 X-shaped brackets which hold standard 2x4 boards steady, and a sturdy carry bag.
  • WORK HEIGHT - the working height is 30 inches tall: Large enough to lay a 4ft x 8ft wood board on top. It’s expandable by simply adding risers (not included) for an increased working height. It supports up to 6, 000 pounds of power tools and machinery.
  • VERSATILE FUNCTIONALITY - Choose from 4 sizes, CK6S, CK9S, CK12S and CK15S. The larger the base, the more weight the table can hold. The wider sizes allow you to complete 2 jobs at once.
  • INSTANT SET UP – this stand is ready to use right out of the box, no Assembly required. It takes just seconds to set up. When the job is done, it conveniently folds up for easy storage and transport.
Check Stock

WORKPRO 32-Piece Reciprocating Saw Blade Set - Metal/Woodcutting Saw Blades, Pruner Saw Blades with Organizer Pouch

  • Woodcutting saw blades are made entirely of Cr-V steel construction for cutting coarse/fuel wood with a thickness of 20-175mm, FREE OF NAIL. Pruning saw blade for cutting branch with less than dia.180mm.
  • Metal saw blade is made of Bi-material for cutting metal with a thickness of 0.7-8mm, pipes/profiles with dia.5-100mm, effortless, fine out..
  • Compatible with all reciprocating saw brands. The combination set provides a selection of blades for common applications. Ideal for use with metal, plastic, wood, and drywall..
  • Set includes: 2x 4" thin metal blades 24 TPI, 4x 6" thick metal blades 14 TPI, 2x 6" thin metal blades 18 TPI, 2x 6" thin metal blades 24 TPI.
  • 8x 6" wood blades 6TPI, 8x 6" wood blades 8TPI, 3x 9" wood blades 6TPI, 2x 9" wood blades 3TPI, 1x 9" pruner/wet wood saw blade 5TPI.
  • Bonus saw blade organizer included for easy carrying.
Check Stock

Newone Quick Change 66 pcs Oscillating Multi Tool Saw Blades Accessories Compatiable for Fein Black&Decker Bosch Chicago Roybi Milwaukee Makita Craftsman

  • ...Black＆Decker，Chicago，Craftsman，Dewalt and others. （Do not suitable for Fein Supercut ，Dremel MM40, MM45, Dremel Multi Max 6300 and Bosch MX30.).
  • [Wide usage] Cegzer 18 PCS kits are made of 7 different types of saws, each type of saw blade is specific for a particular purposes. Ideal for fit for cutting wood, plastics, metals and other materials, reaching the effect of sawing,cutting,scraping,sanding,shaping,polishing and removing grout.It meet variety of needs, which could be used for household ,workshop,plant,DIY or other place..
  • [High quality saw blades] Cegzer 18 PCS oscillating saw blades are made of high carbon steel and alloy steel, giving it a coat of paint around the surface and adopting excellent weld technology, which makes our products tougher and thicker.
  • characterized with soft, protect against corrsion, wear resistance and tough. At the same time, it will bring you the perfect experience of cutting sharply and enjoy durable long lating period..
  • [Precision cutting design ] There are exact dividing ruler in the inner side of the products,one side is inch and other side is centimeter, ensure you can use the product and guarantee precision while cutting. Two kinds of special design precision saw blades have longer wavy tooth, provi....
Check Stock