Top With Low Carbon Steel Reviews

15" Long hand forged Damascus steel Hunting Bowie Knife, 2 tone Black Dollar wood with Brass finger guard, Cow Hide Leather sheath with belt loop

  • Overall 15" Long Bowie knife. 9.5" long blade Hand forged Damascus steel blade with 9 Inches cutting edge..
  • 5.5" long Black 2 tone Dollar wood with Brass spacer, Pommel and finger guard round scale.
  • Approximately 5 mm Thick Ladder pattern Damascus steel. Up to standard hunting Bowie Knife.
  • Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt..
  • Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC.
Check Stock

Whole Earth Supply Extra Large - Raindrop Damascus Tracker Blank Blade Knives Knife Making Blanks

  • Overall 11 inches Long hand forged full tang Damascus steel tracker knife blank blade.
  • 6 inches long cutting edge. Up to standard Tracker and camping Knife blank blade.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick fire pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low....
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

10 inches Long Damascus Steel Nessmuk Blade Skinning Knife, Knife Making Supplies, Hand Forged rain Drop Pattern Damascus Steel Blank Blade Hunting Knife, 5.25" Cutting Edge, 4.5" Scale Space

  • Overall 10 inches Long hand forged full tang Damascus steel blank blade.
  • 5.25 inches long cutting edge. Up to standard Nessmuk skinning and Hunting Knife blank blade.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick rain drop pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

16" Long hand forged Damascus steel Hunting Bowie Knife, Bull horn and wood scale with Brass finger guard & Pommel, Cow Hide Leather sheath with belt loop

  • Overall 16" Long Bowie knife. 10.5" long blade Hand forged Damascus steel blade with 9.5 Inches cutting edge..
  • 5.5" long Black Horn and wood scale with Brass spacer, Pommel and finger guard round scale.
  • Approximately 5 mm Thick Twist pattern Damascus steel. Up to standard hunting Bowie Knife.
  • Comes with a fine quality extra thick and robust leather sheath. The sheath has belt inserting loop and can be worn on belt..
  • Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC.
Check Stock

0.028 (24 ga.) x 12\ x 24\

  • 1095 blade steel specifications: 6 inches wide * 12 inches long * 0.16 inches thick.
  • Create your own custom knife that will last a lifetime. Made from high carbon steel, this AbbottoKaylan knife billet sharpens easily, resists chipping, and holds a great edge..
  • 1095 spring steel is a kind of high carbon steel, which has the characteristics of heat resistance, low temperature resistance, oxidation resistance, corrosion resistance, etc..
  • The highest quality of high carbon steel is 1095, which has a carbon content of 1.03%. After heat treatment, it can reach the hardness of HRc58-60. The toughness is very good, but it is not rust resistant. Large-scale felling knives and military knives such as the American "KA-BAR" army knives during World War II used 1095 as the blade material..
Check Stock

9 inches Long Blank Blade, Hand Forged rain Drop Pattern Damascus Steel Skinning Knife Blade, Knife Making Supplies, Drop Point Blade Pocket Knife with 3 Pin Hole, 4.5" Cutting Edge, 4.5" Scale Space

  • Overall 9 inches Long hand forged full tang rain drop pattern Damascus steel blank blade.
  • 4.5 inches long cutting edge. Up to standard Pocket skinning and compact Knife.
  • 4.5" long Scale space with 3 Pin holes for extra strength of scale..
  • Approximately 5 mm Thick rain drop pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
Check Stock

4 Pieces Set of 7.5 and 8.5 and 9 inches Long Hand Forged Damascus Steel Blank Blade Skinning Knife Set, 3 to 4.5 inches Cutting Edge, Compact Pocket Knife Blanks

  • 4 pieces Damascus steel full tang blade skinning knives set. Overall 33 inches Damascus steel blade..
  • Set Contains: a) 9" long straight back blade with 4" cutting edge. 3 pins holes and a Mosaic hole. b) 8.5" long trailing point blade skinning knife with 3.5" cutting edge. 3 pin holes and a Mosaic hole. c) 8.5" long pocket drop point blade with 3.5" cutting edge. 3 pins holes and a Mosaic hole d) 7.5" long compact trailing point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
  • Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

15' Long hand forged Damascus steel Eagle Kukri Knife, 10 inch long full tang blade, Bull horn scale with steel bolster, Cow hide Leather sheath with belt loop

  • 15" Long hand forged Damascus steel full tang blade Eagle Kukri Knife. Full tang blade goes through all the handle as well in a single piece so full tang blades are durable and stronger than non full tang blades.
  • Natural Bull horn scale with steel bolster. Handle Length is 5 inches with inserting hole. Up to standard Eagle Kukri Knife Comes with a fine quality extra thick and robust leather sheath.
  • Up to standard Eagle Kukri Knife comes with a fine quality extra thick and robust leather sheath that has belt inserting loop..
  • Approximately 6 mm Thick Twist pattern Damascus steel. Blade is made of Damascus steel by forging the 1095 and 15N20 high and low carbon steel . The sheath has belt inserting loop and can be worn on belt.
  • Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel. Blade has been given an excellent heat treatment to get it well hardened Hardness 56 to 58 HRC.
Check Stock

PSCCO 12PCS U-Shaped Steel Tapped Hole Clip On Nut Including Screws

  • Corrosion resistant metal. However, over time, all metals tend to corrode. However, the properties of this metal are better than those of soft low-carbon alloys such as carbon steel..
  • U-shaped Steel Tapped Hole Clip Size: 25*14*5mm.
  • Just clamp it on the panel and fix it with the screws provided..
  • Clips are galvanized and screws are powder coated..
Check Stock

4 pieces Damascus steel blank blade set, 7, 8, 9 and 9.5, inches long hand forged blank blade skinning knife set, 2.5 to 4.5 inches long cutting edge, compact pocket knife and skinning knife blades

  • 4 pieces Damascus steel full tang blade skinning knives set. Overall 32 inches Damascus steel blade..
  • Set Contains: a) 9" long trailing point blade with 4.5" cutting edge. 3 pins holes and a Mosaic hole. b) 9" long drop point blade skinning knife with 4" cutting edge. 3 pin holes. c) 7" long pocket spear point blade with 2.5" cutting edge. 3 pins holes and a Mosaic hole d) 8" long compact straight point blade with 3" cutting edge. 3 pin Holes and a Mosaic hole.
  • Full tang blades are considered stronger and durable then non full tang. Up to standard skinning and Pocket Knives..
  • Blade is made of Hand forged Damascus steel by forging the 1095 and 15N20 high and low carbon steel.
  • Approximately 4 mm Thick Twist pattern Damascus steel clip point blade. Our Damascus steel is prepared by forging over 465 layer of high carbon and low carbon steel..
Check Stock

1 Pair Western Style Antique Spur, Male Knights Equestrian Equipment Spurs for Boots, Horse Riding Ornaments Low Carbon Steel Carving Spurs with Hand Engraved Trims

  • ...ble for all riding boots and male knights, creating a versatile denim temperament. Which can helps to improve leg skills or train horses, improve equestrian skills, assist in communication between knights and horses..
  • Horse Riding Ornaments Black Steel Engraved Spur- Western Style Antique Spurs are made of black low carbon stee materials, durable and not easy to bend, strong and resistant to corrosion. The rotating tooth roller not only can effectively control the horse, but also reduce the damage to the horse. The carved stud and the metal pendant at the end. At each step, a clang sounds and takes you into the wild Western world..
  • Wide Applications of the Horse Spur- The curved gear thorn reduces the stimulation of the horse and avoids significant damage to the horse. Knight Equipment Spurs are suitable for all kinds of occasions, such as training horses/ equestrian events/ dressage/ sports/ entertainment/ performances/ farms/ ranch etc..
  • Easy to Operate and Use- The slot is located at the rear and can be fixedly mounted between the spur gear and the belt. Spurs for Boots, Western Retro Cowboy Black Carbon Steel Carving Spurs with Roller..
  • Package Includes- 1 Pair of Western Antique Spur.
  • Black Low Carbon Steel Spurs, Western Spur, Equestrian Equipment ....
Check Stock

FGen 100pcs Low Noise Motor Dedicated 608RS Skateboard Bearing Fingertip Gyro Special Bearing Red

  • Bearing material: bearing material is divided into bearing steel, high carbon steel, low carbon steel, sealing material is divided into iron cover and....
  • Bearing model: 608RS bearing length: 8mm * 22mm * 7mm, with skateboards, skates, roller skates, long, electric skateboard, the highest precision in....
  • Deep groove ball bearings are mainly subjected to radial loads and can also bear both radial and axial loads. When it is only subjected to radial....
  • This type of bearing has small friction coefficient, high speed limit, simple structure, low manufacturing cost and easy to achieve high manufacturing....
  • Dimensional range and form vary, used in precision instruments, low noise motors, automobiles, motorcycles and general machinery, etc. It is a widely....
Check Stock

Cuetec Cynergy CT-15K Carbon Shaft (3/8x10)

  • [Low Deflection Cue Carbon Fiber Shaft]This carbon fiber shaft is filled with a customized foam inside which allows for less deflection on shots with a lot of spin, and it performs consistently and accurately,it is suitable for most professional players.
  • [High Stiffness]The carbon fiber material features with high stiffness and tensile strength,so the carbon fiber shafts are dent,warp,and scratch-resistant.
  • [10.5mm/11.8mm/12.5mm Tip Size]There are all premium multi-layered leather tips,the difference is in the ferrule,10.5mm with stainless steel ferrule,but 11.8mm/12.5mm with XTC ferrule.
  • [3/8×8 Joint]3/8×8 stainless steel joint connects the shaft and the butt together tightly,it provides a sustainable and smooth energy transfer.
  • [Weight Adjustable] You can add or subtract the specially made bolts to add or subtract weight,so you can get a carbon fiber cue which the weight you are satisfied..
Check Stock