Top Wire Vise Reviews

5 Pcs Anchor Wire Vise Anchor Vise Grape Trellis Anchor Vise for Tightening 12-13 Gauge Wire to Build Trellises, Vineyards, Fences and Arbors

  • Package Contents: you will receive 5 pieces of anchor wire vises for building trellises and vineyards, the sufficient quantity is enough for your daily use and replacement needs.
  • Quality Material: these anchor vises are made of quality aluminum material with long term applicable ability.
  • These anchor wire vises can effectively keep the wire from slipping out.
  • Size Information: the size of our wire vise measures approx. 6 x 3 x 3 cm/ 2.36 x 1.18 x 1.18 inches, the portable size is convenient for you to carry or store those tiny wire vises.
  • Wide Range of Applications: our gauge wire vises can be applied to build trellises, vineyards, fences or trees, providing you with an optimized experience for your garden work.
  • Choice of Wire: it is recommended to use the anchor vise for grape trellis with bare or galvanized wire, not with wire with other coatings.
  • For proper application of the wire vise, please pay attention to and follow our recommendations.
Check Stock

IRWIN VISE-GRIP Wire Stripping Tool / Wire Cutter, 5-Inch (2078305)

  • IRWIN VISE-GRIP wire stripper/cutter works as both a wire cutter and a wire stripper.
  • 10-20 AWG selection dial adjusts for stripping wire of varying gauges.
  • Textured grips help reduce hand slippage.
Check Stock

4 Pcs Anchor Wire Vise Anchor Vise Grape Trellis 9 Gauge Metal Wire Galvanized Solid Wire for Tightening 8~11 Gauge Wire to Build Trellises, Vineyards, Fences and Arbors

  • Sufficient Quantity: our anchor clamp set includes 4 pieces anchor wire vises and 1 bundle of galvanized iron wire, the vises are suitable for 8 to 11 gauge wires, they are enough to meet your work and replacement needs.
  • Reliable Material: these anchor cable vises are made of aluminum, and the iron wire with galvanized technology has long term applicability.
  • The anchor cable vise can effectively avoid the iron wire from slipping out, so you can use it with confidence.
  • Size Information: the size of our wire cutters is about 6 x 3 x 3 cm/ 2.36 x 1.18 x 1.18 inches, they are suitable for 8 to 11 gauge wire, each wire vise is about 30 grams, the specification of iron wire is 9 gauge, each roll is 32.81 feet in length, the matching combinations are convenient for you to buy.
  • Wire Selection: it is recommended to use our galvanized metal wire, do not use wires with other coatings, in order to use wire cutters correctly, please pay attention and follow our suggestions.
  • Applicable Scenarios: our vise and bendable wire can be applied to build vineyards, fences, trees and so on, they can probably provide a nice using experience for your garden work.
Check Stock

Riverruns Fly Tying Vise

  • ...rotate 360 degrees, this allows the tier to view the fly from all angles, to finish fly tying without removing the hook. By rotating the screw, height of the vise can be adjusted..
  • The hard chromium carbon steel jaw accommodate size #22 to #3/0 fly hooks. Please note that this is an approximation as the gauge of the wire used to manufacture fly hooks do vary from brand to brand. We cancelled extra midge jaw program after first butch testing, it is not necessary. Since this Standard jaw has all the functions..
  • Length: 8.6 inch (21.5cm). Color: silver + black color. The vise is ideal for a beginner wishing to upgrade to a rotary vise or an experienced fly tier looking for an inexpensive vise or lightweight travelling vise for that trip away..
  • Free Aventik Fly Tying Vise Racks in two popular colors, Grey and Black. Made of Styrofoam 15PA, high density with hook rust inhibition, 16 slits each for holding hooks and flies securely. Size 2.5 Inch 6.5 cm dia, can slide over and fix on any vise stem. A stainless steel spring included for adding on the vise for holding any fly tying thread or feathers..
Check Stock

HIPOGT Table Vise Clamp Bench Vise Woodworking Vise with Anvil 360° Swivel Vice for Workbench Table Clamp Vise Grip, Cutting Conduit, Drilling, Metalworking

  • Table vise clamp : Aluminum body, Portable, vice for workbench quickly Clamps to surface.
  • 360 Degree Swivel base allows rotating the vise for versatility.
  • Jaw opening: 2.16 in (55MM),vise stand, Non-slip textured surface increases the grip force of jaw, which firmly hold the material, save time and effort when you work.
  • Rubber on the jaws can be removed to reveal a cross pattern for use on wire/rods.
  • Ideal for Woodworking,Home Work Shop Vise, assembly,holding small parts in Jewelry, Model making, Electronics, general maintenance.
Check Stock

Fasmov Swivel 3\ Universal Table Vise Tilts Rotate 360° Universal Work

  • The Table Vise will not deform even under high pressure, the vise is made of cast aluminum, the jaws are made of hardened high-carbon steel alloy, and the movable parts are made of precision milled heat-treated chromium plate carbon steel..
  • Jaws are 3" x 3/4" / 79mm x 17mm with a 2" / 51mm opening, the clip has a wide enough opening for any workbench or table..
  • Adjustable and rotates to any possible angle, rubber Jaws for no scratch and firm clamping, enabling you to lock the workpiece in any position..
  • Rubber on the jaws can be removed to reveal a cross pattern for use on wire/rods, The overall design of pliers has laid a good foundation for the smooth completion of your work..
  • Lightweight, small vise, easy operation, Ideal for holding small parts in Jewelry, Hobby, Model making, Electronics and more..
Check Stock

LinkEZ 4 pcs Anchor Vise Grape Trellis for 8~11GA Wire

  • Insert 8~11GA wire (0.12"~0.16") into the tube, will hold wire in place, no slipping out.
  • Use BARE wire or galvanized wire but not wire with other coating.
  • Great for Vineyard trellising, also arbor & orchard farms.
  • You do NOT need screws to install. The trellis' pulling force will keep the anchor vise inside end post.
Check Stock

DBM IMPORTS High Precision 8 Jaw Wire Cut EDM Vise HRC 55 .0002 Toolmaker Stainless Steel Hardened Grinding Milling

  • Stainless Steel High Precision 8" Wire Cut Vise.
  • Parellelism and squareness within .0002".
  • Precision ground and hardened throughout.
  • Made of stainless steel to resist erosion.
  • Case Overall dimension: 13-1/2''L x 6''W x 3''H.
Check Stock

Starrett 166C Pin Vise Tool – Holds Drills, Wires, Jewelry, Taps Up to 0.050 - 0.125\ (3.21mm) with Insulated Octagonal Handle for Shock Protection, Tapered Collet

  • NoN-ROLLING OCTAGON SHAPE: The Starrett 166C Pin Vise has an Octagon-shaped handle that prevents the tool from rolling when it’s set down..
  • HOLDS UP TO 3.2 MM: This model pin vise securely holds workpieces sized between 0.050" - 0.125" (1.3mm - 3.2mm), including small stock, taps, drills, reamers, scribers, wire, small files, and other tools..
  • SHOCK PROTECTION: This pin vise features an insulated PVC handle, which protects the user from electric shocks..
  • SMALLER BODY FOR FASTER WORK: The body diameter is narrower than the chuck to enable fast opening and closing of the chuck and faster rotation when working on small workpieces..
  • TAPERED COLLET: Its tapered collet provides maximum clamping surface. Measurements are 2-5/32" handle length and 3-55/64" overall length with chuck closed..
Check Stock

Rotary Fly Tying Vise - Peak Fishing Vise With C-Clamp Mount

  • The PEAK Rotary Vise is designed for optimal tying efficiency and ease of adjustment. Materials (including Stainless Steel, Brass, Tool Steel, and Aircraft Aluminum) are chosen to last a lifetime..
  • Hardened and tempered tool steel jaws hold hooks securely, from size 2/0 (depending on exact hook wire diameter) down to the smallest you can buy..
  • C-Clamp Mount option is engineered to outperform the competition. Reverse the lower rabbeted jaw to get a grip range from 2-1/4" to 11/16"..
  • Jaws ride on precision guide rods holding the jaw faces parallel, there is no rotating clamp screw bearing against your table to damage the finish..
  • The deep rabbet engages rounded table edges so your vise won't rock..
Check Stock

Rotary Fly Tying Vise - Peak Fishing Vise With Pedestal Base

  • The Peak Rotary Vise is designed for optimal tying efficiency and ease of adjustment. Materials (including Stainless Steel, Brass, Tool Steel, and Aircraft Aluminum) are chosen to last a lifetime..
  • Hardened and tempered tool steel jaws hold hooks securely, from size 2/0 (depending on exact hook wire diameter) down to the smallest on the market..
  • The large stable pedestal base will hold this vise where you set it and the non-marking feet will protect the surface you set it on..
  • The steel base is powder coated white for a durable surface that provides a backdrop you can see your materials against..
  • The base also includes an integrated hook/bead pocket with rounded edges for ease of removal and two accessory post mounting holes (accessory post not included)..
Check Stock

Aluminum Crimping Loop Sleeve for 1/8\ Diameter Wire Rope and Cable (1/8\ 100PCS)

  • Fit for wire rope diameter: 1/8" ( 3mm - 3.4mm ).
  • Suitable for anything that require strong cable.
  • Lock both ends of the guide wire by vise, pliers, compression tools.
  • Economical solution for fixing and transporting general purpose cable.
Check Stock

COMOWARE 55 Pcs Pin Vise Hand Drill with Micro Drill Bit Set, Precision Jewelry Drill, Hand Drill for Jewelry Making, HSS Micro Drill Bits (0.3-3.0mm), Craft Drill for Resin Polymer Clay Craft DIY

  • ...se craft drill is perfect for drilling small holes on wood, plastic, rubber, polymer clay, PVC, walnut, model, amber, olive nut and other soft materials. Great hobby drill set for your manual work..
  • 【NOT ONLY A DRILL TOOL】- Except for clamping micro drill bits, this pin vise hand drill is also able to clamp iron wire and twist it into any shape you want, making it a perfect hand drill for jewelry making, electronic assembly and other DIY project..
Check Stock