Top Wire Rope Sheave Reviews

VEVOR 2ton Snatch Block with Chain 4400 lbs Capacity Snatch Rigging Block 3 Single Sheave Block w/Swivel Hook G70 Chain Fit 3/8 Wire Cable Heavy Duty for Pulling Wrecker Roll Back Recovery

  • 4400 LBS loading Capacity: The working load capacity is up to 4400 lbs, able to lift and tow heavy loads. 3'' sheave size, fitting for 3/8" wire cable. 10'' x 3'' in dimension is compact for easy storage. Chain Size: 31.5 inch * 5/16 inch..
  • Steel Frame with Chain: Built by heavy-duty steel with a powder-coated finish, our snatch block pulley system has better immunity to corrosion and rust. Also, our high-strength G70 chain with grab hook won’t wear out from rust over time..
  • 3-Inch Single Sheave: Smooth single sheave protects the rope from damaging and saves more effort. It is possible to remove one side by taking the pin off, slip in the winch cable, and change your pulling direction to pull a vehicle out of an awkward place..
  • 360° Rotation: Adopt a one-piece casting process.
  • the cable pulley block features the swivel shackle for great convenience and enhanced security. The built-in security device avoids accidental falling..
  • Wide Application: Our snatch block pulley is widely used to do the lifting, towing, recovery, and rigging jobs outdoor and indoor, ideal for factories, warehouses, garages, shipbuilding, engineering machinery, etc..
Check Stock

500 Lb Pickup Truck Hydraulic Pwc Dock Jib Engine Hoist Crane Hitch Mount Lift

  • Package Content: 10pcs x Crane Pulley Block.
  • Sheave Size: 15 x 10mm/ 0.59" x 0.4"(D*T).
  • Overall Size: 62 x 21 x 16mm/ 2.4" x 0.83" x 0.63"(L*W*T).
  • Swivel Eye Inner Size: 14 x 11mm/0.55" x 0.43" (L* W ).
Check Stock

Mytee Products Snatch Block with Hook WLL 2 Ton 3 Sheave 3/8 Inch Wire Rope Wrecker Roll Back Recovery

  • The snatch block is a pulley system with covered and protected yet removable sides..
  • Snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point..
Check Stock

Mytee Products Snatch Block with Hook WLL 8 Ton 6 Sheave 3/4 Inch Wire Rope Wrecker Roll Back Recovery

  • The snatch block is a pulley system with covered and protected yet removable sides..
  • Snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point..
Check Stock

Mytee Products Snatch Block with Hook WLL 4 Ton 4 1/2\ Sheave 1/2 Inch Wire Rope Wrecker Roll Back Recovery

  • The snatch block is a pulley system with covered and protected yet removable sides..
  • Snatch blocks or pulleys are used to change the direction of the pull to a different angle relative to a fixed point..
Check Stock

Hardware Essentials 852494 Double Sheave Fixed Pulley (1-1/2\), Gray

  • Zinc die cast sheave and steel body with zinc finish.
Check Stock

Stainless Steel Swivel Double Eye (20)

  • Designed for use with rope or cord in indoor and outdoor applications.
  • Removable axle and sheave for easier rigging.
Check Stock

BELT IDLER PULLEY RANGE SPORT 14-19 RANGE 13-19 3.0L & 5.0L LR036304 OEM

  • Designed for use with rope or cord in indoor and outdoor applications.
  • Can be rigged as a block and tackle to reduce line pull.
  • Zinc die-cast body with solid brass sheave.
Check Stock

HI-GEAR Wire Rope Pulley Block 3 Ton 6,600 LBS Working Capacity Swivel Eye Hoist Hook Snatch Block Anodized with Hook Compatible Rope Size Up to 7/16 .

  • ROPE SIZE: The block and tally pulley system is 1.70" (43 mm) of Sheave Diameter. Hook Opening is 3/4'' (19mm). Accepts Cable, Wire and Rope size up to 7/16''..
  • MAXIMUM WEIGHT: 3 Ton (6,600 lbs) Working Load Limit.
  • FUNCTIONALITY: Increase the pulling power of your winch with a swiveling feature from the Snatch block.
  • USES: Heavy Duty All Metal Construction. The small pully system will allow you re-direct the force of your item to mobilize your item in an easy and effortless way..
  • FEATURES: The pully system contains an Anodized Steel Hook, Swivel, Housing & Bushing..
Check Stock

GM CLIMBING 40kN Micro Double Pulley Prusik Minding Ball Bearing UIAA CE for Progress Capture System Rigging Hauling Rescue Arborist Tree Climbing

  • ...or you in a wide variety of applications, like general rigging, hauling, dragging system, rescue, tree climbing, mountaineering, etc..
  • Easier rope installation and removal due to swing side plates. You don't have to thread rope from end to end, much facilitate the set-up progress of system. Prusik minding plates and sheaves efficiently tend prusik of progress capture system..
  • The closing style of connecting point qualifies the pulley to be compatible with most kinds of carabiners. Large connecting space, enough for 2 carabiners attachment. Bottom becket creates additional attachment point, simplifying the whole system..
  • Adoption of ball bearing sheave assures a nicely smooth rotation as well as keep up to its maximum efficiency..
  • Certified and conforming to CE EN 12278 (for pulley), Rating to 40kN=2 x (10kN+10kN) breaking strength. 36mm / 1.41in sheave diameter, provides high pulley efficiency for all you need for a pulley, no matter in arborist applications, or pulling a stranded boat, hauling some out of a crevasse, etc..
Check Stock

Omni Rigging Block Swivel 2.6\ Material Handling Pulley Loss Proof ASME Certified

  • WLL: 4,500 lbf, Block Sheave Diameter: 2.6”.
Check Stock

Koch 3250393 3 Snatch Block Double Sheave

  • Made of 304 stainless steel, sturdy, anti-rust and corrosion-resisttant with strong structure.
  • Rope Size Range: 3/8-1/2 Inches, Sheave Diameter: 2 Inches, Overall Length: 5 Inches.
  • Easy installation of a flexiable sliding pulley for kayaks, canoes, construction, household project.
  • Smooth turning wheels, 360 degree rotation to prevent rope or cable from knotting.
Check Stock

GM CLIMBING 40kN Micro Double Pulley Prusik Minding Ball Bearing UIAA CE for Progress Capture System Rigging Hauling Rescue Arborist Tree Climbing (Pack of 2)

  • ...ke general rigging, hauling, dragging system, rescue, tree climbing, mountaineering, etc..
  • Easier rope installation and removal due to swing side plates. You don't have to thread rope from end to end, much facilitate the set-up progress of system. Prusik minding plates and sheaves efficiently tend prusik of progress capture system..
  • The closing style of connecting point qualifies the pulley to be compatible with most kinds of carabiners. Large connecting space, enough for 2 carabiners attachment. Bottom becket creates additional attachment point, simplifying the whole system..
  • Adoption of ball bearing sheave assures a nicely smooth rotation as well as keep up to its maximum efficiency..
  • Certified and conforming to CE EN 12278 (for pulley), Rating to 40kN=2 x (10kN+10kN) breaking strength. 36mm / 1.41in sheave diameter, provides high pulley efficiency for all you need for a pulley, no matter in arborist applications, or pulling a stranded boat, hauling some out of a crevasse, etc..
Check Stock