Top Wire Harness Terminal Reviews

Terminal Removal Tool, 76PCS 52 Sizes Economical Terminal Release Kits for Auto Car Wire Connector, Pin Extractors Key Set for Household Harness, Stainless Steel Rubberized Grips Terminal Ejector Kits

  • Wide Applications: This terminal removal tool can be widely used for most of the connector terminal removal, picker harness terminals and connector crimp pin removal. Most home appliances, cars, motorcycles and many other electronic devices..
  • Easy To Use: No need to pry open the terminals, just push and pull the terminal pins. The automotive terminal removal tools can effortlessly removing terminal wires from the wire harness connector and add a new wire, so you can maintain the factory original harness and plug in your own electronic device without any damage..
  • Material: Stainless Steel, Plastic. The pins terminals removal tools are made of stainless steel and plastic, the needles are steel and the width between needles can be change on your own if necessary, It has strong flexibility and durability. which can be used repeatedly, the O ring handle make it more safe to operate the terminal pins connectors. With Environmental protection rubberized grips to help with hold and control and not easy to scratch your hands..
  • What will you get: There are 76 pieces terminals removal key tools in total, include 25 pieces single pin extractors, 34 pieces double pin extractors, 1 piece three pin extractor and 16 pieces casing tools. 18pcs*2+20pcs+11pcs+3*3pcs, The ....
Check Stock

Dr.Acces EZGO TXT LED Light Kit W/Upgrade Harness | Golf Cart LED Light Kit for EZGO TXT 1996-2013 Gas&Electric

  • Fits on EZGO TXT Golf Cart Gas and Electric 1996 to 2013..
  • LED Head light and LED Taillights with upgrade harness for energy-saving and durability.
  • It comes with All LED for the headlights and taillights with upgrade harness, upgrade harness that allows you to extend to turn signal,horn and brake pedal light etc in futurn, No need to change harness in future and only to buy extra horn and turn signal function, brake pedal ect..
  • The light kit is designed to be used with 12V-DC power only!On 36V electric cars, you can use two of the series connected 6V battery, connecting the positive wire to the positive terminal on one battery and the negative wire to the negative terminal of the other battery. On 48V systems, you must use a voltage reducer. if not, the led light will be burnt out..
  • It comes with detail instruction, it will takes about 2-3 hours to install. Please feel free to contact us for any assistance. you might need Offering warranty, free replacement or refund for any defective accessories..
Check Stock

Ronybuy 10x Markers Wire Plug - 2 Wire Pigtail for Sealed Side Marker Tail Trailer Clearance Lights, 6" Long 2 Prong, Marker Lights Wiring Plug Fit 2" 2.5" Side Markers

  • 【Description】Pack of 10pcs of 2 prong male pigtails wire plugs, they can be used to replace the OE plug of tail/trailer/clearance/marker lights..
  • 【Specification】The plug harness connector is 2-Pin and 90°design, 6" long to connect with your lights easily. White is ground and black is positive. A #10 ring terminal of white wire is for easy grounding..
  • 【Application】Fits 2" and 2.5" side markers and clearance lights, or any clearance or side marker lights that require a 2 prong male plug, or a replacement for any other devices that require a PL-10 2-Pin plug. Fits most trucks & trailers, and more..
  • 【Easy Installation】Simply connect the 2 pins to the terminal before grounding the ring terminal to the chassis and connecting to a power source. Please note the connector plugs should work with round rubber grommets..
  • 【Warranty】2-Year Warranty, 45 days money back guarantee. The trailer light Harness wire is DOT Certified and Meets SAE requirements..
Check Stock

Vemote SAE Battery Connector 10AWG SAE to Ring Terminal Harness with 15Amps Fuse 2 Pin SAE Quick Disconnect Connector 2FT Extension Cable for Motorcycle RVs Boats etc.

  • [SAE To Ring Terminal Cable]: 10AWG 100% copper heavy duty wire, 2ft cable with 15A fuse for electrical protection.
  • Compared with other SAE 2-Pin Harness, our 10 gauge cable is more flexible and thicker..
  • [Easy to install]: Simply unscrew the battery bolts, slip these ring terminals on, and tighten the battery bolts down. .
  • [Convenient for you to charge]: Ring terminal harness allows you to connect the battery quickly without having to take the seat off. You can use this quick connector to charge the battery or to connect other accessories to your battery..
  • [Wide compatible]: Our SAE to O ring terminal harness is the best way to keep a battery charged on a Motorcycle, Boat, Cycle, Bike, Car, Tractor, Riding Mower, ATV etc..
  • [With Weatherproof Cover]: Attached weatherproof dust cover protects 2-pin quick disconnect SAE terminal end from raindrops and dusts..
Check Stock

Hopkins 11143374 Plug-In Simple Vehicle Wiring Kit

  • No cutting or splicing required- simply unplug the factory wiring harness and plug in your Hopkins wiring kit.
  • Features Original Equipment Manufacturer (OEM) connectors for a perfect, weather-tight fit.
  • Wire functions are printed directly on the wire, for easy identification.
  • Includes di-electric terminal grease and dust covers to protect terminals from corrosion.
  • Equipped with a serrated edge ring terminal for establishing a good ground where applicable.
Check Stock

Dr.Acces Club Car DS LED Light | LED Headlights & Tail Lights For Club Car DS Gas & Electric golf carts (1993 & up) 12V

  • This LED Light Kit made for Gas and Electric Club Car DS golf carts 1993-up.Not for Club Car Precedent. It's your bare essentials basic lights kit. Please do not buy it if your golf cart has original halogen Light(factory already installed);.
  • LED Head light and LED Taillights with upgrade harness for energy-saving and durability.
  • It comes with All LED for the headlights and taillights with upgrade harness, upgrade harness that allows you to extend to turn signal,horn and brake pedal light etc in futurn, No need to change harness in future and only to buy extra horn and turn signal function, brake pedal ect;.
  • The light kit is designed to be used with 12V-DC power only!On 36V electric cars, you can use two of the series connected 6V battery, connecting the positive wire to the positive terminal on one battery and the negative wire to the negative terminal of the other battery. On 48V systems, you must use a voltage reducer;.
  • It comes with detail instruction, it will takes about 2-3 hours to install. Please feel free to contact us for any assistance. you might need Offering warranty, free replacement or refund for any defective accessories..
Check Stock

70955

  • FEATURES: 12 position terminal block for accessory attachment.
  • 6 40-amp cube style relays (plug-in style).
  • 6 Diodes to prevent LED “field collapse”.
  • Inline 50amp manual resetting circuit breaker.
  • 8 gauge power leads with crimped and soldered terminal for connection to the battery.
  • Integrated LVCO (Low-Voltage-Cut-Off) circuit.
  • Fuse for LVCO which can be removed to bypass the LVCO.
  • High-temp, abrasion resistant wiring cables.
  • KIT CONTENTS: (1) Switch pod w/ 6 Rocker Switches, (1) Switch pod wiring harness, (2) Switch pod mounting brackets, (1) Relay pod, (1) Relay pod power wire, (1) Relay pod ground wire, Mounting hardware.
Check Stock

Oyviny 5 Way Flat Trailer Wiring Harness Plug with 22 inch Wire Lead Trailer End Durable 5 Pin Male Connector Trailer Light Wiring Harness Extension for Trailer RV Boat Color-Coded Waterproof

  • 5 pin trailer connector with a 22 inch wire pigtail, 5-Way trailer harness connects to your tow vehicle to control trailer light functions, ideal for marine trailers with hydraulic or surge brakes.
  • High quality 5 way trailer plug, resisting corrosion brass and tin-plated terminal provides good conductivity and rubber-molded connector makes it better waterproof and longer using life.
  • Pre-Stripped 5 pin trailer wiring harness makes installation quick and easy.
  • 5 way color-coded bonded wires respectively stand for tail lights, brake lights, turn signals, reverse lights and ground.
  • Trailer 5 pin connector with split wire allows you to run wires from the connector directly to each taillight - no jumper wire off the main harness to one of your taillights is necessary with this style harness.
  • 5 wire trailer plug with ergonomic design, there are tabs on both sides of the plug, offers a better grip when plugging in or unplugging. Oyviny 5 flat trailer wiring harness comes with 1 Year Warranty, your satisfaction comes first, if any question we will 100% assist you!.
Check Stock

Goldwood Sound 160 Watts 8ohm Compression Midrange Speaker Driver Black (GM-500CD)

  • 2 Goldwood Sound XO-310 round 3-way speaker crossovers with terminal plates and circuit breakers, heavy duty ABS plastic housings, spring loaded red and black raw wire connectors.
  • 3-way wire harness, 18" straight pass through wires to woofer, 18" wires with resistor to the midrange, 24" wires with 4.0Mh capacitor to the tweeter.
  • Auto circuit breakers, all wires have male crimp clamps, overall measurement of 4.5" round, cut out measurement of 3.25" round.
  • Use for speaker cabinet, home speaker, car speaker, this listing and price is for 2 passive crossovers with terminal plates.
Check Stock

Terminal Extractor Removal Tool Kit, 82 Pieces Depinning Key Tool Set for Car Auto Household Devices, Wire Connector Pin Release Extractor Tool with a Protective Bag

  • 【Package Include】 Offers single, double pin extractors and casting tool of different sizes to fit most terminal. 82 Pieces electrical pin removal tool kit includes 28Pcs Single Pin Extractor, 30Pcs Double Pin Extractor, 24Pcs Casing Tool and protective bag..
  • 【Depinning Tool With protective bag】This terminal tool removal kit set is sharp, so we provide a protective case for you. You can keep your tools in it to make it more portable and prevent children from playing with them..
  • 【High Quality】Our pin removal tool set is made of high-quality stainless steel and plastic with high hardness. It is not easy to deform and can be used repeatedly for a long time. The pin headers are available in different specifications and are suitable for most electronic equipment maintenance, making your work more convenient..
  • 【Wide Application】The terminal extractor tool kit are common tools for most connector terminals, suitable for most cars, such as:motorcycles and other electronic devices like household appliances..
  • 【Easy to Use】The terminal pin removal tool is easy to use, just push and pull the terminal pins with connector removal tool for removal effortlessly from the wire harness connectors without any damage. Kindly Note: Most of the wire harnesses....
Check Stock

IWISS Deutsch Connector Crimping Tool Kit for Deutsch DT Connectors, Solid & Stamped Contacts, Delphi Weather Pack Crimper,Deutsch Pin Removal Tool Kit-12PCS

  • Automotive Harness Wiring Tool Kit: Ideal for pin & depin automotive electrical connectors like Weather Pack connectors, Deutsch Connectors, Molex connectors which are commonly found on cars, RVs, trucks, motorcycles, race cars and boats..
  • Deutsch Crimping Tools: IWD-16, IWD-12 & IWD-20 crimpers are designed for crimping Deutsch solid pins and sockets(Size 16, Size 12 & Size 20) to fit in Deutsch DT, DTP, DTM, HD10, Jiffy Splice connectors..
  • Weather Pack Crimping Tool: Delphi WeatherPack Crimper: IWC-1424B Metri-Pack and Weather Pack crimp tool aids in the assembly process of the Metri-Pack 150 & 280 and Weather Pack connector lines. The crimpers are designed to crimp the terminals and seals found in the Metri-Pack and Weather Pack series..
  • Open Barrel Terminal Crimper: IWC-1424A open barrel crimp tool is designed to crimp non-insulated, open barrel terminals, also known as OEM terminals. It has five crimp stations that roll the open barrel terminal tabs over the wire and insulation, crimping them to the terminal..
  • Pin Removal Tools: ET-01( DT-RT1) Deutsch wedgelock removal tool and depin tools for WeatherPack terminals, Deutsch DT, DTM, DTP connectors release terminals safely without damaging the vehicle wiring harness or terminal block..
Check Stock

Maerd Terminal Removal Tool Kit, 76Pcs Terminal Ejector Kit for Car, Pin Extractor Tool Set Release Electrical Wire Connector Puller Repair Key Removal Tools

  • 【Portable Safety Protective Bag】This set of tools is sharp and can be placed in a protective box for easy carry and prevent children play as toys.
  • 【Package Include】 76Pcs pin removal tool kit includes 28Pcs Single Pin Extractor, 30Pcs Double Pin Extractor, 18Pcs Casing Tool.
  • 【High Quality】The terminal extractor tool is made of premium quality stainless steel and plastic, not easily get out of shape, can be long term use. The pin removal tool has different sizes fit any terminal.
  • 【Easy to Use】 The electric pin remover tool is easy to use, just push and pull the terminal pins with connector removal tool for removal effortlessly from the wire harness connectors without any damage.The O ring handle make it more safe to operate the terminal pins connectors.
  • 【Wide Application 】This set of electric pin remover tool is light weight and compact shape, Split into multiple portable sets, which can be used in different places, The wire extraction tool is perfect for cars, motorcycles, household appliances and other electronic devices.
Check Stock

SUZCO 25 Foot 4 Wire 4-Flat Trailer Light Wiring Harness Extension Kit 4-Way Plug 4 Pin 21 Male & 4 Female Extension Connector & Wishbone-Style with 18 Gauge White Ground Wire with SAE J1128

  • ... is designed to supply power for tail lights, turn and brake lights, as well as a ground connection. The white grounding wire is so enough long to wiring. The trailer side ground wire is about 2ft. Trailer wiring harness features a ground wire. The white ground wire is made of 18-gauge, which is corrosion resistant terminal..
  • 【4-WAY CONNECTORS & FITMENT】You can install the trailer wire so quickly and easily through the 4-way connectors. 4-pin connectors are available allowing the basic hookup of the three lighting functions (running, turn, and brake lights) plus one pin is provided for a ground wire. Most standard light duty trailers will use a 4-pole flat connector. Not compatible with motorcycle trailer wiring, and you could confirm the fitment to be not the wrong item before ordering..
  • 【4 WIRING INSTRUCTION】There are instructions for wiring the running light and license plate lights included. The different color wires are clearly identified as each wire's function, so you can make the installation safe and straight-forward..
Check Stock