Top Wire Collated Nail Maker Reviews

BOSTITCH Framing Nails, 28 Degree, Wire Weld,, 3-Inch x .120-Inch, 2000-Pack (S10D-FH)

Full Roundhead 3" X . 120" 28 Degree wire Collated framing nail.
Coated finish eases penetration resistance and increases holding power..
Smooth shank geometry delivers acceptable withdrawal capacity when extra holding power is not required..

Check Stock

HDS721010CLA332, PN 0F13656, MLC JPT3GH, Hitachi 1TB SATA 3.5 Hard Drive

SIDING NAILER: Accepts 16º wire collated coil siding nails from 1-1/2" - 2-1/2". Also accepts 15º plastic collated coil siding nails from 1-1/2" - 2-1/4".
SELECtIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switch.
EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads.
FASTENERS: Drives wire and plastic sheet collated siding nails for added flexibility.
NO MAR NOSE CAP: Protects material from accidental marks.
DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for optimal depth in a variety of applications.
AIR DEFLECTOR: Adjustable air deflector directs the air exhaust in any direction.
LIGHTWEIGHT: Only 4.8lbs for easy maneuverability.
ADDED SAFETY: Plastic shield deflects wire collation.
WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty.

Check Stock

Metabo HPT 1-3/4 Inch Full Round Head Wire Collated Roofing Nails | 7,200 Count | 12113HPT

TYPE: Full Round Head Electro Galvanized Smooth Shank High Wire Collated Roofing Nails.
APPLICATION: Nail provides excellent holding power for installation of asphalt roofing shingles and insulation boards.
TREATMENT: Electro Galvanized, coats the nails with a layer of zinc, for greater rust resistance.
COMPATIBILITY: Compatible with the Metabo HPT NV45AB2.

Check Stock

Metabo HPT Coil Siding Nailer, 1-1/2 inch to 2-1/2 inch Siding Nails, Side load, Tilt Bottom Magazine (NV65AH2)

SIDING NAILER: Accepts 16º wire collated coil siding nails from 1-1/2" - 2-1/2". Also accepts 15º plastic collated coil siding nails from 1-1/2" - 2-1/4".
SELECtIVE ACTUATION: Switch between sequential or contact nailing with the simple flip of a switch.
EASY LOAD: Side load, tilt bottom magazine for fast and easy reloads.
FASTENERS: Drives wire and plastic sheet collated siding nails for added flexibility.
NO MAR NOSE CAP: Protects material from accidental marks.
DEPTH ADJUSTMENT: Tool-less depth of drive adjustment for optimal depth in a variety of applications.
AIR DEFLECTOR: Adjustable air deflector directs the air exhaust in any direction.
LIGHTWEIGHT: Only 4.8lbs for easy maneuverability.
ADDED SAFETY: Plastic shield deflects wire collation.
WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty.

Check Stock

Carpenter Air Tools CCN45 7/8\ To 1 3/4\ 15° Pneumatic Coil Roofing Nailer

The CCN45 drives 15° wire Collated roofing nails from 7/8 to 1-3/4 in length..
Contact firing mode for convenience and speed enabling smooth uninterrupted operation..
Ergonomic molded rubber grip ensures the tool fits comfortably in your hand reducing fatigue..
Durable and lightweight heat-treated aluminum housing for years of solid performance..
Holds a full coil of 120 roofing nails limiting the need for constant reloading and the tool free depth adjustment will help to make sure every nail is set perfectly..

Check Stock

BHTOP CN45N Roofing Nail Gun, 15 Degree Roofing Nailer, 3/4-Inch to 1-3/4-Inch Coil Nails, Air Nailer Coil 120-pcs Load Capacity

Professional Roofing Nail Gun- Professional grade roofing nail gun designed with moving cylinder engine for low recoil. Compatible with 15 degree wire collated roofing nails from 3/4" to 1-3/4".
120 PCs Big loading capacity- Big loading capacity (120PCS) magazine will fasten a full bundle of shingles without reloading. Nails load from the side fast and easy.
Special Improvement-Magnetic nail holder aligns the nails when loading and ensures jam-free firing. Tool-less depth of drive adjustment for precision nailing/flush driving.
Widely Used -Ideal for a range of materials and applications which will meet all your different need in nailing. Perfect for applications such as roofing, asphalt and cedar shingles, wall sheathing, wood crate assembly, flooring underlayment, siding installation, and fences..
Special Humanized Design-Steel contact safety with dual carbide inserts for less wear. Soft grip for comfort and control. Delivers the power to consistently drive nails in the toughest applications..

Check Stock

Pneu-Tools CN45H 1-3/4in. Classic Coil Roofing Nailer

This classic roofing nailer is everything you expect, with a few extra surprises.
While other companies are cutting corners to make a fast dollar, we've gone the extra mile to make sure this tool will last for generations.
Of course, if a tool is going to last a long time, then it should have some great features too, right? That is why this tool is upgraded.
Premium one-step, quick-open magazine to reduce reload times. Smooth-as-butter drive depth adjustment for precision control.
This shoots a 15° wire collated coil roofing nail. Fast single mode trigger and optimized recoil balance.

Check Stock

Duo-Fast, Coil Siding Nail, 650392, 1 7/8 inch x .086 Gauge, Ring Shank Hot Dipped Galvanized, 3,600 per Box

PRODUCTIVITY - 0-Degree plastic collated nails feed into nailer straight, reducing jams and increasing productivity.
EFFICIENCY - 33% more nails per coil means less reloading and less downtime.
PRECISION - No wire flagging around nail coil enabling precise and flush placement.
SAFE AND CLEAN - Nails held together by plastic band avoiding projected and stinging debris.
EXCELLENT PERFORMANCE - Hot dipped galvanized nails are ideal for fiber cement siding, cdear siding, and fencing.

Check Stock

Duo-Fast, Coil Siding Nail, 650394, 2 1/4 inch x .92 Gauge, Ring Shank Hot Dipped Galvanized, 3,600 per Box

Productivity - 0-Degree plastic collated nails feed into nailer straight, reducing jams and increasing productivity.
Efficiency - 33% more nails per coil means less reloading and less downtime.
Precision - No wire flagging around nail coil enabling precise and flush placement.
Safe And Clean - Nails held together by plastic band avoiding projected and stinging debris.
Excellent Performance - Hot dipped galvanized nails are ideal for fiber cement siding, cdear siding, and fencing.

Check Stock

Freeman SNSSG92-225WC 15 Degree 2-1/4\ Wire Collated Galvanized Smooth Shank Coil Siding Nails (3600 count)

Perfect for working with siding, cedar shingles, roof and wall sheathing, and wood fencing.
Compatible with most coil siding nailers capable of firing 2-1/4" wire collated 15 degree siding nails, such as the Freeman PCN65.
Galvanized steel for strength and durability.

Check Stock

Freeman PCN450 Pneumatic 15 Degree 1-3/4' Rapid Fire Coil Roofing Nailer

Designed for applications such as asphalt and cedar shingles, roof and wall sheathing, flooring underlayment, siding installation, wood crate assembly, and fences.
Compatible with 15 degree wire collated roofing nails from 3/4" to 1-3/4".
Magnetic nail holder aligns the nails when loading and ensures jam-free firing.
Bump fire trigger drives nails with speed and accuracy.
Fire lock prevents accidental firing when the tool is not in use.
Magnesium body, resulting in a lightweight tool great for extended use.
One piece drive blade for increase durability.
Anodized aluminum cylinder extends the life of the tool.
Tool-free finger depth adjust for various applications.

Check Stock

CREWTOWER Coil Siding Nailer CN565B, 1-1/4-inch to 2-1/2-inch Pneumatic Siding Nail Gun for Siding Sheathing Fencing Roof Decking

...uitable for DIYers tackling home improvement and repair projects, as well as professional contractors at the job site..
⚙️【Tool Specifications】: The pneumatic coil nail gun weighs only 5.5lbs with aluminium body, drives 15 degree flat wire welded nails(capacity 250-400, length 1-3/4"-2-1/2") or plastic sheet collated nails(capacity 200, length 1-1/4"-2-1/2"), smooth screw and ring shank, diameter 0.091"-0.099", air-powered, operating pressure 70-120PSI..

Check Stock

BHTOP CN55N Pneumatic Nail Gun,15 Degree Professional Coil Nailer, 1-1/4 Inch to 2-1/4 inch Siding Nailer, 350-pcs Load Capacity Pallet Nailer

【Professional Nailer】Professional grade pallet nail gun designed with moving cylinder engine for low recoil. Compatible with 15 degree wire collated nails from 1-1/4" to 2-1/4". Fastener Diameter: 2.1-2.3 mm.
【Widely Use】Ideal for a range of materials and applications and satisfies your different need in nailing. Perfect for applications such as making and repairing pallets, crates, fences, wainscoting, trim and sheath, frames, subfloors.
【Humanized Design】Steel contact safety with dual carbide inserts for less wear. Soft grip for comfort and control. Delivers the power to consistently drive nails in the toughest applications..
【Big loading capacity】Big loading capacity (300-350 PCS) magazine will fasten a full bundle of shingles without reloading. Nails load from the side fast and easy.
【Special Improvement】Magnetic nail holder aligns the nails when loading and ensures jam-free firing. Tool-less depth of drive adjustment for precision nailing/flush driving.

Check Stock