Top Windscreen Blade Holder Reviews

USA Premium Store Roland Blade Holder + 5 pcs 45 degree Blades for Vinyl Cutter Cutting Plotter

  • Diameter (Clamp): 11.5mm Diameter (Blade): 2mm Length (Clamp to down): 28mm Length (Total): 56.5mm.
  • This blade holder fits most Roland cutters/ plotters. Please measure your holder if you are not sure..
  • Blade holders are consumable items and should be replaced every 6 months..
  • Blade Holder and Blades are compatible with most Roland, Copam, Omnisign, Rabbit, Laserpoint, Redsail, USCutter and Seiki brand cutters, as well as most China made vinyl cutters that use a Roland style blade holder..
  • Contents: 1 pcs Gold Roland Blade Holder 5 pcs 45 Degree Blades.
Check Stock

Airplane Cleanup and Car Wash

  • Select your type of airplane ready for cleaning..
  • Wash, rinse and dry your airplane before scrubbing the windscreen..
  • Rotate the propellers and fix the broken blade ready for flying..
  • Fill your airplane with fuel before cleaning the interior ready for the pilot to sit..
  • Decorate your plane by choosing some great accessories to show off your new appearance while flying..
Check Stock

SUNMON MV7 Mic Stand with Foam Windscreen,Shock Mount and Pop Filter For Shure MV7 Microphone

  • 【Perfect Effect】- Suspension boom arm hold your Shure MV7 USB Podcast Microphone in any position you want. No sag, just rock solid..
  • 【Upgraded Shock Mount】- Specially designed for Shure MV7 microphone for better shock absorption. No more frustrating post-production editing..
  • 【Professional Pop Filter】- Foam windscreen cover compatible with Shure MV7 microphones,Pop Filter improves the recording quality by drastically filter out all unwanted background noises..
  • 【3 Layer Desgin 】– Pop filter is made from double layered steel meshs in outside and one layered foam windscreen in middle. It optimizes air current diffusion for maximum audio transparency that eliminates plosives far more effectively than fabric filters..
  • 【Adjustable Gooseneck】- The steel metal gooseneck holder fully supports the filter's weight and keep it in place. You can adjust the angle and distance between the screen and the microphone to best fit your needs for yours lovely voice..
Check Stock

Harpow 12Pcs Oscillating Blades Multi Blades Kits,Power Oscillating Tool Accessory, Wood Metal Plastic Cutting Saw Blades for Fein Bosch Craftsman Rockwell Einhell Westfalia Ferm

  • 2 pcs Harpow Precision Japanese blade with stianless holder, 45mm.
  • 2 pcs Harpow Bi-metal E-cut saw blade With stainless steel holder, 28mm.
  • 2 pcs Harpow Bi-metal E-cut saw blade with stainless steel holder, 42mm.
  • 2 pcs Harpow Precision Japanese blade with stianless holder, 65mm..
Check Stock

Harpow 6Pcs Oscillating Blades Kits, Power Oscillating Tool Accessory,Cutting Saw Blades for Fein Bosch Craftsman Rockwell Einhell Westfalia Ferm Pro-Line Matrix Tools

  • 1 pc Harpow Precision Japanese blade with stianless holder, 45mm.
  • 1 pc Harpow Bi-metal E-cut saw blade With stainless steel holder, 28mm.
  • 1 pc Harpow Bi-metal E-cut saw blade with stainless steel holder, 42mm.
  • 1 pc Harpow Precision Japanese blade with stianless holder, 65mm..
Check Stock

H6 Windscreen Muff and Foam for Zoom H6 Portable Handy Recorder Indoor Outdoor Microphone Windscreen by YOUSHARES (2 PACK)

  • Perfect Windscreen - Foam and furry windscreen pack fits perfectly on Zoom H6 handy recorder for indoor and outdoor use..
  • Indoor Use - H6 microphone foam covers reduce ambient noise, blocks out plosives, keeps the pops down..
  • Outdoor Use - H6 furry dead cat windscreen minimizes wind noise and vocal plosives, perfect for recordings and travel blogs..
  • Perfect protection - The zoom windscreen's material is soft and elastic to protect your recorder when its in the bag..
  • Packing: 1 × Foam Windscreen,1 × Furry Windscreen..
Check Stock

ASI PTF-76-10, 5 x 20 mm PCB Fuse Holder for Printed Circuit Board Mount, 15 mm Pin Spacing, No Center Pin, 10 Amp, 250V, UL (Pack of 10)

  • 【12v Inline fuse holder for standard blade fuses 】-Fuses holder kit including 12PCS 14 AWG inline fuse holders with 60PCS standard car fuses (2A,3A,5A, 7.5A)X5PCS+(10A,15A,20A,30A)X10PCS . The auto fuse size:19mm x 5mm x 18.5mm.14 Gauge Waterproof Pigtail In-line Fuse Holder can support fuses rating of 1A 2A 3A 4A 5A 7.5A 10A 15A 20A ATC/ATO blade fuse..
  • 【Good Conductivity&High-Temperature Resistance】-The Standard blade fuse holder made of tinned copper as a conductor to ensure good bending performance, refractory resistance and excellent electrical conductivity.Heavy duty 14AWG red power wire suitable for cars, trucks, Jeeps, boats,marine ATVs, UTVs, SUVs, etc. Adding circuit protection for car alarms,car recorder, GPS, dashboard camera, VCD player, etc..
  • 【waterproof rubber cap design】-This 14 Gauge heavy duty inline wiring harness with tight-fitting waterproof rubber cap,theses fuse link wire are not easy to fall off or enter water that can protect all standard blade fuse inside ,your car and electrical device from short circuit..
  • 【Inline Blade Fuse Holder Easy Installation】This 12V-DC ATC/ATO TC/ATO in line fuse holder has long enough wire loop Length.
  • automotive fuse holder loop length: 11.8 inches / 30cm.Firstly,cutting the inline....
Check Stock

X AUTOHAUX Rear Windshield Wiper Blade Arm Set for Volvo V60 2015-2017 - 310mm 12inch

  • Note: Please make certain this is the correct application type of windscreen kit for your vehicle..
Check Stock

YYST Clear Light saber Wall Mount Wall Rack Wall Holder - Hardware Included.

  • Patented Product for keeping lightsaber vertically displayed.Quantity : One clear blade holder , one wall mount clip. Hardware included..
  • Clear - Both the blade holder and the wall mount clip are clear. Does its job without being visually obtrusive. Before installing , Please peel off....
  • Easy to take in and take out - Put your light saber into the blade holder and push the tip into the wall mount clip..
  • Light Saber not included. 5 Pounds - the blade holder is very thick, which withstands up to 5 Pounds..
  • Screw Covers included - the screw covers are provided to hide your screws..
Check Stock

Parker Safety Razor, SRB Straight Edge Disposable Blade Professional Barber Straight Edge Razor with Stainless Steel Blade Arm, 5 Parker Premium Professional Blades Included

  • ...dge razor and is designed for luxury shaves at home or salon. However, because this is a disposable blade razor, no sharpening or stropping is required. Simply change the blade. This razor is the choice of professional barbers and shave parlors worldwide..
  • SNAP/ LOCK BLADE HOLDER: The Parker straight razor features a snap/lock blade handle in which a half blade or single-edge blade fits securely. It is easy to change the blade..
  • ROUNDED END OF BLADE COMPARTMENT: The straight razor comes with a rounded blade holder for precise beard edging, shaping, and minimizing cuts while shaving..
  • FOR PROFESSIONAL USE: This classic men’s razor gives you quality shaves at home. It is also a favorite of professionals where it is used in salons, barber shops and shave parlors worldwide..
  • 5 PREMIUM PARKER PLATINUM BLADES INCLUDED: This straight blade/straight edge razor comes with 5 Premium Parker Platinum blades. However, you can use a professional half blade razor blade, or you can snap any standard double edge razor blade in half and insert it in the blade holder for use..
Check Stock

Outdoor Edge BOA - Folding Utility Razor Blade Box Cutter Knife with Ergonomic Polymer Handle and Pocket Clip Orange 3-Blades

  • PERECT ERGONOMICS – Extensive jimping on the stainless-steel blade holder provides a secure, tactile grip allowing for precise control and for....
  • EASY BLADE CHANGE – The blade holder features a thumb activated blade release button with guard for safe and secure blade changes with the flick of....
  • ONE HAND OPENING – Integrated thumb stud allows for easy one hand opening making this a great addition to any job site or home project..
  • DURABLE CONSTRUCTION – The 420J2 stainless-steel blade holder is mounted to a (Black, Orange) sure-grip textured ABS polymer handle with an....
  • SERVICE FOR LIFE – Outdoor Edge produces quality cutting tools that are built to last.
  • if you have a problem with your Outdoor Edge knife contact....
Check Stock

DISE Coconut Scraper Machine Electric Dual Speed Excellent Stability 120-230 Voltes,100W,60Hz Multicolor

  • Clean the surface as well as the bottom of the unit and fox the blade on the motor haft using blade holder..
  • Fix the unit on the flat surface by rotating of the knob in (Lock) postion .Make sure that unit is fixed to the floor firmly..
  • Plug in the power cord to the power supply and turn on the swich.Select the desired speed..
  • Push the press switch downwards to make the blades rotate and use the other hand to scrape the coconut..
  • One Finished the scraping switch off and unplug the unit, detach the blade with the bladed holder and unlock the suction, clean the blade and place id safely in the blade holder..
Check Stock

Shimomura Kihan 35098 Tonkatsu Shop Slicer, Julienne Vegetables, Made in Japan, Smart Cabbage, 0.04 inch (1 mm) Slicer, Safe Holder

  • Size (approximate): Width 3.6 x Length 10.6 x Height 0.6 inches (9.2 x 27 x 1.5 cm), Blade Length 3.1 inches (8 cm), Slicing Surface Width 3.0 x Length 7.1 inches (7.5 x 18 cm), Holder Width 3.8 x Depth 2.4 x Height 1.2 inches.
  • Materials: Main Body/Holder: ABS (Acrylonitrile Butadiene Styrene) Resin (Heat Resistant up to 176°F (80°C)), Blade: Stainless steel.
  • Size (W x L x H): Approx. 3.6 x 10.6 x 0.6 inches (9.2 x 27.
  • Product Weight: Approx. 2.9 oz (85 g) (Holder: 0.7 oz (20 g).
  • Heat resistant temperature: 176°F (80°C) (resin part).
Check Stock