Top Window Crank Handle Reviews

Prime-Line TH 24086 Entrygard Nesting Operator Cover and Crank, White

  • Use this cover and handle with casement and awning operators that have 5/16 in. diameter splines.
  • The unfolded (opened) crank handle extends a total of 5 in. inward, but folds and nestles down to a low profile.
  • The operator cover is constructed of molded plastic, and the crank handle of diecast zinc.
  • The window crank features a set screw at the base of the handle allowing it to lock onto the spindle.
  • Both the operator crank handle and cover are easy to install.
Check Stock

Prime-Line H 3514 9 inch Diecast Construction Aluminum Painted Finish Left Hand Casement Operator with Square Body

  • Used on old style, steel-framed crank-out casement windows.
  • This is a left-handed operator. Handing is determined when facing the window from the inside looking out. Like the hinges, this operator will also mount on the left side of the window.
  • Hardened steel constructed arm and drive gears.
  • Equipped with a diecast crank handle and a 9 in. long hardened steel arm.
  • Installs with 4 screws. 1 pair spaced apart at 3-7/8 in. on center, and another pair at 4-3/4 in. on center.
Check Stock

SERIES 525 CASEMENT SINGLE VENT (X) LEFT/RIGTH OUTSWING (30\W x 72\H)

  • Special 3/8" PELLA CASEMENT Window CRANK Butterfly Wing Nut T-HANDLE - 3 Colors Measures 2 3/8" Across X 3/4" Tall PELLA WINDOW MECHANISMS ONLY!.
Check Stock

Special 3/8\ PELLA CASEMENT Window CRANK Butterfly Wing Nut T-HANDLE (Copperite)

  • Special 3/8" PELLA CASEMENT Window CRANK Butterfly Wing Nut T-HANDLE - 3 Colors Measures 2 3/8" Across X 3/4" Tall PELLA WINDOW MECHANISMS ONLY!.
Check Stock

Andersen Operator Handle in Stone (1974 to 1995) - 0532408

Check Stock

AutoE 2X Car Window Winder Crank Door Handle Black (for Honda/Civic 1984-2000)

  • The mounting hole size : 11.8mm (Please make sure its the same as yours).
Check Stock

Performance Tool W80646 Door/Window Handle Clip Tool, 1 Pack

  • Removes and installs door handle and window crank retainer clips on many popular vehicles..
Check Stock

Tenpoint Xtend Adjustable Crank Handle Universal Fit

  • Crank Handle starts at a compact 5-inches long and extends to its user-friendly length of 7. 5-inches.
  • When extended to its full length, the crank handle decreases the cocking effort by approximately 45% over the standard crank.
  • Includes part to convert the Xtend Crank Handle from a square drive to a hex drive for use on ACUdraw Pro or ACUdraw units.
  • Employs a unique torque control mechanism that eliminates the possibility of over-cranking any acudraw unit once the crossbow is Cocked.
  • Greatly reduces the chance of damaging the acudraw while attempting to cock crossbow.
Check Stock

Samfox Ball Crank Table Handle - Machine Crank Handle for Bridgeport Milling Mill d26

  • Ball Crank Table Handle is safe and convenient to replace the handle.
  • Milling Machine Ball Handle is made of high hardness material, durable to use..
  • Three ball crank table handle for milling machine using..
  • D26 Ball Crank Table Handle is suitable for most milling machines.
Check Stock

LANTRO JS - D26 Ball Crank Table Handle, Milling Machine 3 Ball Crank Handle, Replace Handle for Bridgeport Milling Mill, 16mm Inner Hole Diameter

  • △Parameters: Whole Length: Approx. 197mm / 7.8in.
  • Inner Hole Diameter: Approx. 16mm / 0.6in.
  • △Premuim Quality: The crank handle is made of high hardness material, durable to use. The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use.
  • △Perfect Replacement:Three ball crank table handle for milling machine using, suitable for most milling machines and work benches.
  • △Comfortable Grip:The olive-shaped hand-held part of the three ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load.
  • △Easy Installation:Ball Crank Table Handle is safe and convenient to replace the handle.
Check Stock

CASTLECREEK Window Blind Shade Roller Sun Shade Cover Sunscreen Roll-Up Sand 8X6

  • WINDOW SHADE – The CASTLECREEK roller shade fits easily on your indoor windows, RV, sunroom windows, patio or out on the porch.
  • DURABLE - High-density polyethylene blocks out sun and heat. The roman shade is made from durable material.
  • BLOCKS UV RAYS – The breathable fabric lets air flow through whilst blocking out 90% of UV light. The damp proof coating prevents the buildup of....
  • HAND CRANK – The window shade for home features a clutch that locks at any height and a removable hand crank that raises and lowers the shade.
  • EASY TO CLEAN – The window covering shade simply wipes clean with a damp cloth. Includes headrail and mounting hardware.
Check Stock

Crank Chop Food Chopper and Processor XL - Chop Dice Puree Vegetables Onions Tomatoes Garlic Meats and Nuts in Just Seconds for Delicious Meals - Perfect for Homemade Salsa

  • VERSATILE MANUAL FOOD PROCESSOR: The Crank Chop manual food processor is the vegetable chopper that chops, dices, and purees with a crank of the handle, reducing your need for multiple kitchen tools. The included basket attachment allows you to spin salads and fruit, while the whisk attachments allows you to whisk eggs and other liquids. Its compact design makes it perfect for camping trips, college dorms, or small living spaces..
  • REDUCE PREP TIME: The sharp blades and easy-to-crank handle make meal prep quick and effortless, saving you time in the kitchen..
  • GENEROUS CAPACITY: The Crank Chop XL chopper has a generous 3-cup bowl capacity that's perfect for your finished chopped salad, guacamole, salsa, and more!.
  • EASY TO USE: Just place ingredients like onion, garlic, tomato, nuts, or any veggie and herb into the bowl, replace the lid, then crank the handle to start chopping. The more you crank, the finer the chop. In seconds, you’ll have perfectly prepared food. 3-cup bowl capacity allows you to chop larger amounts of fruits and vegetables..
Check Stock

LANTRO JS D26 Milling Machine Ball Table Handle 3 Ball Crank Handle for Bridgeport Milling Machine

  • △Parameters:Weight: Approx. 784g / 27.7oz, Whole Length: Approx. 197mm / 7.8in, Inner Hole Diameter: Approx. 16mm / 0.6in, Keyway Width: Approx. 3mm / 0.1in, Inner Cylinder Width: Approx. 1.1in.
  • △Perfect Replacement:Three ball crank table handle for milling machine using, suitable for most milling machines and work benches.
  • △Comfortable Grip:The olive-shaped hand-held part of the three ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load.
  • △Premuim Quality:Made of high hardness material, durable to use. The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use.
  • △Easy Installation:Ball Crank Table Handle is safe and convenient to replace the handle.
Check Stock