Top Wifi Dongle For Raspberry Pi 3 Reviews

Smraza Raspberry Pi 4 Case, Acrylic Case for Raspberry Pi 4B with Cooling Fan 35mm, 4pcs Heatsinks, 5V 3A Power Supply for Raspberry Pi 4 Model B, RPI 4 8GB/4GB/2GB(RPI Board Not Included)

  • Only For Raspberry Pi 4 - Raspberry pi 4 model b case is made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal. Note: RPI board NOT included, and this case is not suitable for pi 3..
  • Easy Installation with Buckle Design - 3-layer pi 4 case just need 3 steps to install. The buckle design makes it easier to install and disassemble..
  • Easy to Access to All Ports - It can be access to all ports of Raspberry Pi board, such as cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
  • Always Keep Raspberry Pi 4 B Cooling - Fan size: 35×35mm. The DC5V 2 pin quiet cooling fan and 4pcs heatsinks are good for heat dissipation of Raspberry Pi board..
  • Easy to Turn On/Off Your Pi - The 5V 3A raspberry pi 4 power supply with a handy on/off switch on the 59 inches cable. Control the power on/off of your pi 4 board through pressing the button..
Check Stock

iUniker USB Dongle Expansion Breakout Module Kit for Raspberry Pi Zero/W, Both Front & Back Side Can Be Inserted

  • - Both front and back side can be inserted.
  • - As we know that Raspberry Pi Zero is very tiny, and it does not have standard USB port to connect your standard USB devices, so it may hard to access like other Raspberry Pi version..
  • - Most of you are likely to access Linux OS via SSH service. Our long term goal will be to use SSH over USB. This means that we have to configure Raspbian to treat the USB port like an Ethernet port. it can make your Raspberry Pi zero became a USB stick to your computer, so that you can access your Raspberry Pi easier than before..
  • - It’s high qualified and easy to assemble, you can make your Raspberry Pi Zero became a USB Ethernet dongle in minutes..
Check Stock

CanaKit Raspberry Pi Zero W Wireless Complete Starter Kit - 16 GB Edition

  • Raspberry Pi Zero W (Wireless) Board with on-board WiFi and Bluetooth.
  • Official Raspberry Pi Zero Case with 3 Interchangeable Lids.
  • SanDisk 16 GB MicroSD Card (Class 10) - Pre-loaded with NOOBS.
  • CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi (5-foot cable).
  • USB OTG Cable, Mini HDMI Adapter and Heat Sink.
Check Stock

Smraza Raspberry Pi 4 Case, Acrylic Pi 4B Case with Quiet Cooling Fan, 4PCS Heatsinks, 5V 3A USB-C Power Supply for Raspberry Pi 4 Model B 8GB/4GB/2GB - Black

  • NEWEST RASPBERRY PI 4 B CASE - Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B (Pi Board NOT Included). Made of acrylic, the RPI 4B case won't block Pi's Wifi or Bluetooth signal.
  • EASY TO ACCESS TO ALL PORTS - Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the microSD card.
  • KEEP RASPBERRY PI 4 COOLING - The Quiet Cooling Fan and 4 pcs Heatsinks are good for heat dissipation of Raspberry Pi board.
  • CONVENIENT TO TURN ON / OFF YOUR PI - Stable 3A USB-C power supply for Raspberry Pi 4 with a handy on/off switch on the 59 inches cable, easily press button to power on Raspberry Pi 4.
  • 100% CUSTOMER SATISFACTION GUARANTEED - If for ANY reason you aren't completely satisfied with the case, please let us know and we will give you a satisfy solution. WARNING: This case is NOT compatible with other model of Raspberry Pi.
Check Stock

Metal Case for Raspberry Pi 4 Model B Case and Heatsink Thermal Adhesive

  • Corresponding to all position for the Raspberry Pi 4, using state-of-the-art technology to cut accurately, ensure that each interface can be highly....
  • Ultra-thin design, easy to install, built-in thermal column, heat dissipation faster. Open design does not block the signal of wifi, Bluetooth for....
  • Come with 3 Thermal tapes for CPU, RAM, LAN.Made of aluminum with good thermal conductivity, keep your pi working and be away from overheating.....
  • Play as a protective armor role. Durable, hard, long-lasting rust-free, wear-resistant, and can be well protected to your Raspberry Pi 4 B.
  • Good-in looking with heavy metal. Easy to assemble with the provided screws and tools. Note: The Raspberry Pi 4 motherboard is not include.
Check Stock

MakerSpot 5-Port Stackable USB Docking Hub for Raspberry Pi Zero V1.3 (with Camera Connector) and Pi Zero W/2W (with Bluetooth & WiFi)

  • 5 x USB 2.0 data and charging ports, a micro USB port for power input up to 2.3A consumption .
  • 5 x electrolytic capacitors to filter electrical noise and stabilize voltage with an independent protection circuit to limit total current to 2.3A .
  • an RJ45 Ethernet port with Realtek RTL8152B 10/100M chip, A 3.5mm audio jack, supporting both recording and playback .
  • Compatible with Raspberry Pi Zero v1.3 (with Camera Connector) and Raspberry Pi Zero W / Pi Zero 2 W (with Bluetooth and WiFi) .
  • Raspberry Pi Zero shown in the photos is for illustrative purpose only, not included in this offer.
Check Stock

Geekworm NASPi Gemini Dual 2.5'' SATA HDD/SSD NAS Storage Kit with Safe Shutdown & Auto Power On & RAID Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)

  • 【NASPi Gemini Overview】Geekworm NASPi Gemini offering an easy and fast way to create your home media center and building NAS or Web server for your Raspberry Pi 4 with dual 2.5 inch SATA HDD/SSDs..
  • 【What's Included】NASPi Gemini is composed of three parts: X882 dual 2.5" sata hdd storage shield, NASPi Gemini metal case, heat dissipation system(include a 4010 PWM fan with metal fan bracket), and they will be packed into NASPi Gemini metal case to get a complete NASPi Gemini.
  • 【How to Power NASPi Gemini】5Vdc +/-5% , ≥4A (Via USB C or DC jack of X882).
  • Recommend to power via DC jack if meet any I/O error. DO NOT power via the USB C of Raspberry Pi 4!!!.
  • 【HDD/SSD Thickness Supported】NASPi Gemini supports HDD/SSD with a thickness not exceeding 16mm, 2.5" HDD/SSD on the market are 7mm, 9.5mm, 12mm and 15mm thickness.(Recommend to use HDD.).
  • 【Function】Raspberry Pi 4 Dual SATA SSD Case Kit With safe shutdown, auto power on and RAID function. With 4010 PWM cooling fan, UASP supported Only..
  • 【Wifi Description】Because the shielding of the metal cases will cause the loss of 2.4G wifi signal, only recommend to use Ethernet or 5G WiFi..
  • 【Button Switch Operation】Press to turn on.
  • Press and hold for 1~2 seconds to reboot.
Check Stock

Libre Computer Le Potato Mini Single Board Computer with USB WiFi 4 and Heatsink (2GB WiFi 4, Libre Blue)

  • ...Power supplies with insufficient power will experience voltage drops that cause instability and random application crashes or boot issues. For additional assistance, please use hub.libre.computer for guides and end-user support..
  • COMPATIBILITY WITH PERIPHERALS DESIGNED FOR RASPBERRY PI: Most USB based peripherals are directly supported. The GPIO header maintains the same layout for hardware I2C, SPI, PWM, and UART compatibility. I2S, PCM, and SDIO do not share the same pins so most audio peripherals will need to be re-routed. Le Potato features additional GPIOs and SARADC pins on separate headers..
Check Stock

Jstvro Duplex MMDVM Hotspot Board Radio Station WiFi Digital Voice Modem P25 DMR Hotspot Support YSF Raspberry Pi OLED Antenna (Duplex-Board-OLED-Antenna)

  • Suit for Raspberry Pi 3,Raspberry Pi Zero W. Support:D-STAR, P25, DMR and work with UHF. In Single mode support both Uhf and Vhf.
  • Basic Setup: Set the same freq as Radio Mobile, for example: 433.550000MHZ DMR, WIFI SSID:pi-star,PASSWORD:raspberry, Need the 2.4GHz SSID as the Pi Zero W doesn't support 5.8GHz.
  • Best customer service: feel free to contact us,we will reply soon within 8 hours..
Check Stock

YaFex Case for Raspberry Pi 4 B with Cooling Fan and Fan Guard,4 Pcs Heat Sinks,5V 3A USB-C Power Supply, USB Card Reader,1.5M Micro HDMI Cable and HDMI Adapter

  • 【Latest Version Raspberry Pi 4 Case】Unique 9 layer raspberry pi case designed for Raspberry Pi 4 Model B. Made of acrylic, the Raspberry Pi 4B case won’t block Pi’s Wifi or Bluetooth signal..
  • 【Easy to Access to All Ports】Cut-outs for the dual micro HDMI, Audio/Video, USB and Ethernet ports, as well as the USB-C power connector and access to the micro SD card..
  • 【Keep Raspberry Pi 4 Board Cooling】Specially come with quiet cooling fan and 4 pcs heatsinks for CPU/ROM/RAM quick cooling.Also included a fan guard to protect the fan..
  • 【1.5M Micro HDMI Cable and HDMI Adapter】1.5M Micro HDMI to HDMI Cable for Raspberry Pi 4. Up to 4K Resolution. Up to 60P (Frames/Second). CEC Support. Also come with a 1.5M Micro HDMI to HDMI Adapter Cable..
  • 【Excellent Customer Service】If you have any questions about the case installation, please feel free to contact us. We will teach you to use our products within 24 hours..
Check Stock

Seeed Studio ReSpeaker 4-Mic Array for Raspberry Pi, Raspberry Pi Microphone

  • ReSpeaker 4-Mic Array for Raspberry Pi(Pi 3/Pi 4 B +) is a 4 microphone expansion board for Raspberry Pi designed for AI and voice applications. This means that you can build a more powerful and flexible voice product that integrates Amazon Alexa Voice Service, Google Assistant, and so on..
  • Different from ReSpeaker 2-Mics Pi HAT, this board is developed based on AC108, a highly integrated quad-channel ADC with I2S/TDM output transition for high definition voice capture..
  • Besides, this 4-Mics version provides a super cool LED ring, which contains 12 APA102 programmable LEDs.With that 4 microphones and the LED ring, Raspberry Pi would have ability to do VAD(Voice Activity Detection), estimate DOA(Direction of Arrival) and show the direction via LED ring, just like Amazon Echo or Google Home..
  • This Raspberry Pi microphone support all Raspberry Pi models, including Raspberry Pi Zero, Raspberry Pi 1 B+, Pi 2 B, Pi 3 B, Pi 3 B+,Pi 4 B..
  • ReSpeaker 4-Mic array does not have audio output. If this is a requirement please consider the ReSpeaker 6-Mic Circular Array Kit For Raspberry Pi, the ReSpeaker 4-Mic Linear Array Kit for Raspberry Pi , or the ReSpeaker Mic Array v2.0..
Check Stock

LoveRPi Power-Over-Ethernet (PoE) HAT Kit for Raspberry Pi 3 Model B+ with Black Case

  • ULTIMATE POWER OVER ETHERNET HAT FOR RASPBERRY PI 3 B+: Deliver clean and reliable power to the latest Pi 3 Model B+ by removing the problematic MicroUSB plug altogether! Power-over-Ethernet is both simple, power efficient, and cost effective compared to having multiple power adapters..
  • BUILT FOR CLUSTER NODES: Simplify cable management and expand your on-premise cloud with POE! Power five, ten, twenty Raspberry Pi 3 Model B+ boards through a single POE switch. This PoE HAT was designed to exceed the power delivery standards set by the official Raspberry Pi PoE HAT and other products available on the market..
  • POWER OVER ETHERNET SWITCH REQUIRED: Network switch must be compliant with IEEE 802.3af PoE standard. PoE power output must be within the budget of the switch when powering multiple boards. PoE switch and Raspberry Pi 3 Model B+ sold separately..
  • ANODIZED HEATSINK AND VENTILATED CASE WITH COOLING FAN INCLUDED: Raspberry Pi 3 Model B+ gets very hot and active cooling is the only way to prevent temperatures from exceeding 150°F! This kit includes everything you need to keep your PoE powered board operating at maximum performance. Raspberry Pi 3 Model B+ sold separately!.
  • NOT COMPATIBLE WITH RASPBERRY PI 4 OR RASPBERRY PI 3 MODEL B AND OLDER MODE....
Check Stock

Miuzei Raspberry Pi 3 B+ Case with Fan Cooling, Pi 3B Case with 3 Pcs Heat-Sinks, 5V 3A Power Supply for Raspberry Pi 3 B+ (B Plus), 3B (No Raspberry Pi Board)

  • NEW DESIGN FOR RASPBERRY PI 3 B - Miuzei Clear Acrylic Raspberry Pi 3 B Case is Specially designed for Raspberry pi 3 B / 3 B+, and perfect compatible with Raspberry Pi 3 B / 3 B+ / 2B. Assembly easy for beginners and children..
  • KEEP RASPBERRY PI 3 B+ COOLING - New Raspberry pi 3 B case with a Silence DC 5V cooling fan and 3 pcs Aluminum heatsinks, double cooling system keep your Raspberry pi 3 B+ cool quickly even the CPU under high load..
  • EASY TO ACCESS ALL PORTS - Miuzei Raspberry pi 3 model B case can perfect access all ports including the micro HDMI, Audio/Video, USB and Ethernet Ports, Micro USB Power Connector and Micro SD Card..
  • ETL LISTED 2.5A Micro USB POWER SUPPLY - Raspberry Pi 3 B case With a 59 inch 5V 2.5A power supply which has an ON/OFF switch, easy to power on/off your Raspberry pi 3 b+ / 3 b / 2 b. No need to worry about overvoltage or overcurrent.
  • 18-MONTH FREE RETURN AND EXCHANGE - Miuzei support lifetime technical support and free return and exchange service for each customers..
Check Stock