Top White Trailer Lights Reviews

Partsam 30Pcs 3.8

  • x 0.8″ x 0.2″), Light Size with Black Base: 96mm x 20mm x 10mm (3.8″ x 0.8″ x 0.4″) and center to center distance: 3-5/16″ approx..
  • Partsam Led Lights function as marker lights, camper light, Decorate Light, under dash lights, walk way lights, Golf Cart Light, Interior Lights, trailer lights, truck lamps, clearance lights, runnling lights, side marker lights, front parking lights and so on.
  • As every truck lamp come with two wires, they can only use as one function a time.
  • free screws and Foam tape bases are included. The foam tape bases are used to adhere to the back of the marker lights or to the surface to which the light is to be mounted, for waterproofing. Also you can use a little strong adhesive to be sure.
  • These lights don’t come with the on/off switch and Wire leads come out the back in the center so you must drill a hole in the mounting surface for them.
  • 5.These are Waterproof, not submersible. Please do not use it under water.
  • 2. These lights can not be set up to flash as strobes, of course, you can wire to a toggle (on/off) switch to make it come true.
  • Tips and Warranty: 1. These led lights are not dimmable.
  • The indicator light is hardwired with 2 wires and can be used as constant on trailer light....
Check Stock

LIMICAR Trailer Wiring Harness Kit, 25ft Trailer Wire, Trailer Wiring Harness with 4 Flat Extension Connector, 4 Pin Flat Wishbond Trailer Wiring for Utility Boat Trailer Light Kit

  • 25FT Male & 4-Flat Female Trailer Wiring Harness Extension Kit: Fits Trailers under & over 80" wide. Wire length (25' & 4') makes this trailer harness kit perfect for trailers measuring under or over 80" wide..
  • 18 AWG Color Coded Wires Wishbone Style Harness: 4 flat trailer wire is color-coded and bonded wire for easily installation. White wire: Ground (Negative). Brown wire: Tail Lights. Yellow wire: Driver Side Stop/Turn Lights. Green wire: Passenger Side Stop/Turn Lights. The white ground wire is made of 18-gauge, reduce corrosion and makes installation safe..
  • 25' Trailer Wiring Harness: Designed to split at the trailer tongue and run down each side of the trailer, 4' trailer side ground wire is enough to use for your trailer. Gives you the extra length, just need to extend current truck to trailer wires. No need to splice your new wires, simply extend them with this extender..
  • 4-Way Flat Trailer Harness Kit: Complying with SAE J1128 standards for a low voltage primary cable. Constructed from the highest quality materials and superior quality guaranteed..
Check Stock

Partsam 5x 2 LED Marker Light Cab Panel Light 9 Diodes Sealed Round Clear/Red w Grommet/Pigtail, 2" Mini-Reflex round sealed LED Side Marker, Clearance or ID Light

  • Round Red Led marker Lights w Reflector -- Clear Lens. White Wire is the GROUND and Black is positive. DRILL a hole about 2-1/4" to install it.
  • Color: Red Light / Clear Lens. Each unit Built-in High Power Super Bright Flux 9 leds Lights..
  • Commonly used on Commercial Vehicles such as Peterbilt/ Freightliner/Kenworth, Heavy Duty Trucks, travel trailer, horse tariler, camper trailer, cargo trailer, motorhome, RV etc..
  • Functions: LED Side Marker, Clearance light, ID Light, led trailer side marker lights, led trailer lights, led clearance lights, led trailer clearance lights, led submersible trailer lights etc..
  • This is Brand New High Quality Aftermarket Product. Meet the professional specifications..
Check Stock

SUZCO 25 Foot 4 Wire 4-Flat Trailer Light Wiring Harness Extension Kit 4-Way Plug 4 Pin 21 Male & 4 Female Extension Connector & Wishbone-Style with 18 Gauge White Ground Wire with SAE J1128

  • 【ITEM TYPE】This is a 21ft male & 4 ft female 4-flat marine trailer wiring harness with 4-way conductors and a 2ft white ground wire, made of 18-gauge wire, designed to split at the trailer tongue and run down each side of the trailer. The 4 flat trailer wire is color-coded and bonded wire to easily splice into your trailer's wiring system, no need for splicing wires. This trailer wire harness kit is completely sealed for a long corrosion-resistant installation..
  • 【EXTENSION INCLUDING】This 25foot 4 wire boat trailer wiring extension can conform to the SAE J1128 specification. Extends wiring system provides more flexibility. It can protect tow vehicle electronics from wiring shorts. Includes a 4-feet trunk connector, splices, and clips. This trailer wire harness kit also can work on an COPPER trailer based on the ground wire..
  • 【ENOUGH LENGHT GROUND WIRE】This trailer wire extension with 4 way flat plug connector is designed to supply power for tail lights, turn and brake lights, as well as a ground connection. The white grounding wire is so enough long to wiring. The trailer side ground wire is about 2ft. Trailer wiring harness features a ground wire. The white ground wire is made of 18-gauge, which is corrosion resistant terminal..
Check Stock

LIMICAR Trailer Wiring Harness Extension Kit, 36ft Trailer Wiring Harness with 4 Flat Extension Connector, 28' Male & 8' Female with 4 Pin Flat Wishbond Trailer Harness for Utility Boat Trailer Lights

  • 36FT (28' Male & 8' Female) & 4-Flat Trailer Wiring Harness Extension Kit: Fits Trailers under & over 80" wide. Wire length (36') makes this trailer harness kit perfect for trailers measuring under or over 80" wide..
  • 18 AWG Color Coded Wires Wishbone Style Harness: 4 flat trailer wire is color-coded and bonded wire for easily installation. White wire: Ground (Negative). Brown wire: Tail Lights. Yellow wire: Driver Side Stop/Turn Lights. Green wire: Passenger Side Stop/Turn Lights. The white ground wire is made of 18-gauge, reduce corrosion and makes installation safe..
  • 36' Trailer Wiring Harness: Designed to split at the trailer tongue and run down each side of the trailer, 4' trailer side ground wire is enough to use for your trailer. Gives you the extra length, just need to extend current truck to trailer wires. No need to splice your new wires, simply extend them with this extender..
  • 4-Way Flat Trailer Harness Kit: Complying with SAE J1128 standards for a low voltage primary cable. Constructed from the highest quality materials and superior quality guaranteed..
  • Widely Application: Suitable for marine boat trailer, horse trailer, ATV trailer, and other cargo utility trailer hitches (tow/haul vehicle must have 4-way plug). Not compatible with motorcycle....
Check Stock

SUZCO 36 Ft 4 Wire 4-Flat Trailer Light Wiring Harness Extension Kit, Custom-Made 28' Male & 8' Female with 4' White Ground Wire, 4-Way Plug 4 Pin Male & Female Extension & Wishbone-Style & SAE J1128

  • 【ITEM TYPE】This is our SUZCO custom-made vehicle-specific 36FT male & female 4-flat marine trailer wiring harness with 4-way conductors and a 4' white ground wire, it fits for longer trailers and for customers desiring to wire, made of 18-gauge wire, designed to split at the trailer tongue and run down each side of the trailer. This trailer wire harness kit is completely sealed for a long corrosion-resistant installation..
  • 【36' EXTENSION INCLUDING】This 36foot 4 wire boat trailer wiring extension can conform to the SAE J1128 specification. Extends wiring system provides more flexibility. It can protect tow vehicle electronics from wiring shorts. Includes a 4-feet trunk connector, splices, and clips. This trailer wire harness kit also can work on an aluminum trailer based on the ground wire..
  • 【ENOUGH LENGHT GROUND WIRE】This trailer wire extension with a 4 way flat plug connector is designed to supply power for tail lights, turn and brake lights, as well as a ground connection. The white grounding wire is so enough long to wiring. The trailer side ground wire is about 2ft. Trailer wiring harness features a ground wire. The white ground wire is made of 18-gauge, which is corrosion-resistant terminal..
  • 【4-WAY CONNECTORS & FITMENT】You can inst....
Check Stock

Partsam 10Pcs 3.8\ Inch Smoked 6 White LED Boat Interior Navigation Courtesy Utility Strip Light Bar Marine Deck Transom Step Cockpit Lighting Lamp Waterproof for Fishing Pontoon Kayak Yacht Sailboat

  • ...s, camper outside step light, kayak cockpit lights, deck Lights, accent lighting, fishing pontoon boat interior lights, kayak night fishing, led stern light, Decorate Light, Night light, stairs lights,Boat Center Console Light, under dash lights, walk way lights, Transom Light, Golf Cart Light, Boat Interior Lights,trailer marker lights, trailer clearance lights, white led marker lights and so on.
  • This white led strip is hardwired with 2 wires and can be used as constant on boat lights: White is negative and Black is positive.
  • These lights don't come with the on/off switch and Wire leads come out the back in the center so you must drill a hole in the mounting surface for them.
  • Tips and Warranty: 1. These boat lights are not dimmable.
  • 2. These lights can not be set up to flash as strobes, of course, you can wire to a toggle (on/off)switch to make it come true.
  • 3. When you wire several lights together, you can wire them in parallel.
  • 4. These trailer lights are polarity dependent and They will not work if polarity is reversed.
  • 5.These are Waterproof, not submersible. Please do not use it under water.
  • We truly offer 1 year warranty for our white utility strip lights.
Check Stock

8Pcs 2 Inch Round Led Trailer Marker Lights, 4 Amber + 4 Red 2 Inch Round LED Side Marker and Clearance Marker Lights 4 LED Sealed Flush Mount w/Grommets and 2 Prong Trailer Wire Pigtails Waterproof

  • This listing includes 4 Pieces 2 Inch round amber led marker lights and 4 Pieces 2 Inch round led marker lights Red. These 2 Inch led marker lights are flush mounts to trailer trucks with rubber grommets and standard 2-prong wire pigtails. Sonically sealed, IP67 waterproof housing and lens unit is submersible.
  • Each 2 inch round led trailer side marker lights come with 4 LEDs, providing you better visability when driving on road.
  • These 2 inch round led trailer clearance lights are universal for almost all 12v dc vehicles, such as Semi Truck Trailers, Utility Truck, Horse Trailer, Utility Trailer, Pick Up Truck, UTE, UTV etc..
  • Wiring tips of Each 2 inch round trailer lights: white is the negative and black is the positive.
  • Outer Diameter: 2.5"in., Inner Diameter: 2"in., High w/ Grommet: 1in.(depends how in you press the lights), you may need to drill a hole about 2-5/16" to install these 2 round led marker lights.
  • Notes about these 2 inch round trailer LED clearance marker lights: these 2 inch round led lights can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, please install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
Check Stock

Partsam 6" Rectangular LED Combination Tail Lights Kit Red, 12V LED Submersible Sealed Rectangular Boat Trailer Stop Turn Tail License Plate Brake Running Light Kit w/25ft Wiring Harness 4Pin+Bracket

  • Partsam LED Trailer Light Kits: package includes 2Pcs LED Combination Trailer Tail Lights, 25 feet wiring harness with a standard 4-way flat connector, license plate bracket, stainless steel mounting screw, bolt and hardware, perfect for trailers under 80" wide.
  • NOTE: Trailers over 80" require side clearance lights. If your trailer already have amber side lights you can use this light kit. Otherwise, please kindly refer to partsam 12v led low profile rectangular trailer light kit.
  • Functions: These rectangular combination tail lights do have built-in red side marker lights and serve as the following lighting functions when properly mounted: stop brake light, turn light, tail light, rear reflex, side marker, side reflex, license plate light(drive side only).
  • Different from many other 8 inch rectangular trailer taillights on market, these waterproof trailer light kit has different light dimensions about 5.9"L*3.35"W*2.28"H, which offers you more applications.
  • Sealed IP68 waterproof trailer lights: Submersible Rectangle LED trailer tail lights are equipt with the sealed circuit board and no screws on the lamp surface, which makes it ideal for ....
Check Stock

Partsam LED Pedestal Lights Amber/Amber Double Face 39 LED Turn Signal Lights Stud Mount Fender Lights Side Marker Lights for Heavy Truck Trailer Freightliner Peterbilt Kenworth Mack Western Star

  • ...ights with Dual Mounting Studs: 39 Total LED's and 3 Amber Side Marker LED's.
  • Heavy Duty Chrome Plated Housing, Reflector Design.
  • Versatile multi-directional mounting design (up/down/sideway) to turn the light 90 or 180 degrees.
  • universal stud mount design with interchangeable single or double studs.
  • This Dual-face trailer light is AMBER on both sides! Although in most states in the US it is required for pedestal lights such as this to have an amber face to the front and a red face to the rear, there are some exceptions!.
  • This amber square dual-face trailer light serves functions: Parking and rear turn signal light.
  • Built-in reflex reflector removes the need for separate reflector and Perfect lights to mount on your truck or trailer side fenders.
  • This double face fender light is hard-wired with three plain wires: easy to install with their double stud bolts: White Wire--Negative.
  • White + Black--Full light on, 50% low brightness and function as parking light and side marker lights.
  • White + Red--Back & Front light on, 100% high brightness and function as turn signal lights.
  • This square Led Pedestal Lights can fit for: Freightliner Cascadia Century Classic Columbia Coronado FL70 FLD112 FLD112 FLD120 M2.
Check Stock

14Pcs 4 Inch Rectangle Led Trailer Marker Lights w/Reflex Lens, 2x4 LED Trailer Clearance Side Marker Lights 6 LED Surface Mount for Truck RV Camper Motorhome Clearance Running Lights(7 Amber+ 7 Red)

  • This listing features for 7 pieces 4 inch rectangle amber led trailer marker lights and 7 pieces 4 inch rectangular red led trailer side marker lights, 14 pieces in total. Each rv side marker led lights includes 2 pieces stainless steel screws for surface mounting.
  • Dimensions: 100mm(L)x 50mm(W) x 25mm(H) = 4" x 2" x 1" approx. and fit on standard 3" centers.
  • The rectangular trailer rv side clearance lights features a replaceable, snap-on reflective lens, and built-in reflex reflector removes the need for a separate reflector. Hardwired with 2 wires to mount to any surface: white is ground and black is positive.
  • As many 4 inch rectangle led side marker lights on market have the wires exit from corner or middle of bottom base, our led markers have the wires exit form the from side of bottom base. Also each led trailer light come with 6 led chips, not the led diodes, which will be brighter and have longer lifetime, really great replacement for your old incandescent side marker lights.
  • These 2x4 led marker lights universally fit for most rv, camper, motorhome, trucks, trailers, pickups,tractor etc.an....
Check Stock

This Is Not a Maze: Hidden Objects Color Search

  • Package includes 2 Pieces 2x6 inch Amber Rectangular Trailer Marker Led Lights 3 Wires Surface Mount, 21 Led diodes per amber light.
  • Sealed amber led Light, 3 Wires Setup, High Low Function. Other accessories are not included.
  • Compared with those similar side marker lights on market which can be used as led marker light only, this 6 inch rectangle LED lamp is a 3-WIRE assembly, meaning it can be used as both a turn signal AND a marker lamp simultaneously. It can also be used as only a marker lamp (or only a turn signal) by using two wires and leaving the third wire unused. These are a really popular style thanks to their multi-faceted design.
  • Size: 6" x 2" x 1.4" approx. and hole to hole distance: 4.8". Dim Function draws 20 mA & Bright Function draws 110 mA approx.. This trailer clearance light is unversal for almost all 12V vehicles as well as the size fits.
  • This amber marker lights is HARDWIRED with 3 wires: Black is ground, white is low brightness as marker lights, clearance lights or running lights, red is high brightness as turn signal lights.
  • Commonly known as a trailer light, these 2" x 6" rectangular trailer lights can really be installed anywhere you'd like to surface mount them. It is going to fit perfectly on....
Check Stock

Partsam 8Pcs 4" Round Red LED Trailer Tail Light, 4 Inch Round Led Stop Turn Tail Lights Brake Brake Trailer Lights for RV Trucks, Rubber Grommets and 3-Prong Wire Pigtails Included

  • Package includes 8 Pieces 4 inch Round Led Stop Turn Tail Lights Red, Grommets and 3-prong wire pigtails are included for complete installation.
  • This Waterproof round led trailer lights 12 LED serves 3 functions as stop light, turn signal light and tail light.
  • Recessed mount with grommet and Pigtails.
  • These round tail lights are Approx. 5 inch diameter Grommet Ring and 4" inner diameter and 1 3/16" Thickness.
  • IP65 waterproof light fixture and effectively withstand the invasion and corrosion of sand, dust, dirt, rain, snow etc..
  • Easy to install: White is the ground, red is the high brightness for stop light / turn light / brake lights and Black for low brightness as tail light / running light.
  • These 4 inch round led lights are impact resistant and less susceptible to shock damage. Each LED Light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb.
  • Universal Fit: These round led tail lights are compatible with almost All automobi....
Check Stock