Top Wheel Studs Reviews

Customadeonly 2 Pieces 1' 25mm Hub Centric Conversion Wheel Rim Adapters Spacers with Lip (Change Bolt Pattern) 5x115 to 5x114.3 5x115 to 5x4.5 Center Bore 70.3mm 12x1.5 Stud

  • Please be sure to confirm the fitment & compatibility prior to purchase – If you are not sure if this is applicable to your vehicle -please feel free to ask us!.
  • QTY: 2 Wheel Spacers .Designed to improve the handling & appearance of your vehicle.
  • Made with high grade T-6 Aluminum – CNC machined with precised fit.
  • Carbon steel wheel studs- machine pressed (Extremely durable). Factory studs may need to be shortened..
  • Allow 5X115 Hub to Use 5×114.3 Wheels , Center Bore: 70.3mm & Thread Pitch: 12mm x1.5 . -All lug nuts should be properly tighten with factory torque spec. Average 80-90lb Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to: 1) Shorten the factory studs 2) The wheels need to have the open slots (cavities) between mounting holes. 3) Purchase a set of shorter studs and replace them with the factory studs..
Check Stock

Customadeonly 2 Pieces 3/4' 19mm Hub Centric Conversion Wheel Rim Adapters Spacers (Change Bolt Pattern) 5x115 to 5x114.3 Center Bore 71.5mm 12x1.5 Stud No Lip

  • Please be sure to confirm the fitment & compatibility prior to purchase – If you are not sure if this is applicable to your vehicle -please feel free to ask us!.
  • QTY: 2 Wheel Spacers .Designed to improve the handling & appearance of your vehicle.
  • Made with high grade T-6 Aluminum – CNC machined with precised fit.
  • Carbon steel wheel studs- machine pressed (Extremely durable). Factory studs may need to be shortened. If your factory thread size is different from 12X1.5″ -You will need to purchase a set of open end lug nuts in the correct thread pitch (your factory thread pitch) to complete the installation.
  • Allow 5X115 Hub to Use 5×114.3 Wheels , Center Bore: 71.5mm & Thread Pitch: 12mm x1.5 . -All lug nuts should be properly tighten with factory torque spec. Average 80-90lb Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to: 1) Shorten the factory studs 2) The wheels need to have the open slots (cavities) between mounting holes. 3) Purchase a set of shorter studs and replace them with the factory studs..
Check Stock

Customadeonly 2 Pieces 1.25' Hub Centric Wheel Spacers Adapters Bolt Pattern 5x105 to 5x105 Thread Pitch 12x1.5 Center Bore 56.5mm Fits 2010-2017 Chevy Cruz Sonic Trax Volt

  • Please be sure to confirm the fitment & compatibitliy prior to purchase - If you are not sure if this is applicable to your vehicle -please feel free to ask us! Fits 2010-2017 Chevy Cruz, 2012-2017 Chevy Sonic, 2013-2017 Chevy Trax,2017 Chevy Volt.
  • QTY: 2 Wheel Spacers .Designed to improve the handling & appearance of your vehicle.
  • Made with high grade T-6 Aluminum - CNC machined with precised fit.
  • Carbon steel wheel studs- machine pressed (Extremely durable).
  • Fits Vehicles with Bolt Pattern in 5x105, Center Bore: 56.5mm and Thread Pitch : 12x1.5 -Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to: 1) Shorten the factory studs 2) The wheels need to have the open slots (cavities) between mounting holes. 3) Purchase a set of shorter studs and replace them with the factory studs.
Check Stock

4 Wheel Adapters 6 Lug 5.5" to 5 Lug 5.5"

  • 【Purpose】Convert from 6 lug vehicle to 5 lug wheel, meaning putting 5 lug wheels on 6 lug vehicle.
  • 【Fit Vehicle】Fit vehicles of 6x5.5" or 6x139.7mm bolt pattern. Your Garage filter is to confirm fitting of your vehicle only, not for the wheels..
  • 【Convert Wheel】Convert to wheel must be 5x5.5" or 5x139.7mm bolt pattern. Sold by 2 pairs (4 adapters).
  • 【Quality Assurance】Aircraft quality TRUE forged 6061 T6 lightweight billet. CNC machined with precision craftsmanship. Features in high load capacity and keep stock ride. Anodized for corrosion resistance. Heat-treated 10.9 grade steel studs..
  • Adapters will give you widened stance as well as more stability. If vehicle studs protrude outside the inner piece adapter, you will need to shave down vechile studs..
Check Stock

All Balls Racing 85-1080 Wheel Stud and Nut Kit

  • THIS LISTING IS FOR SIXTEEN (16) STUDS. The studs you are purchasing have a 3/8" x 24 thread and are 1.75" long..
  • OEM Length replacement for the following UTV's. FITS: Polaris ACE 570, 900: 2017-2019--Polaris Ranger 500, 800, 800 XP, 900: 2009-2014--Polaris Ranger Crew 800, Crew 900: 2010-2014--Polaris Ranger XP 700, XP 800: 2009-2011--Polaris RZR 4 800, 900, 4 900: 2010-2014--Polaris RZR 570: 2014-2020--Polaris RZR Trail 570: 2022--Polaris RZR XP, XP 4 900: 2011-2013--Polaris Sportsman 500: 2002-2017.
  • 1/2" longer than stock for quads with 7515513, 7515523 wheel studs.
  • 1/2" longer than stock for the following ATV's: ATP 330, 350 Hawkeye 300 Outlaw 50, 90, 450, 500, 525 Predator 50, 90, 500 Scrambler 50, 90, 500 Sportsman 90, 300, 335, 400, 450, 500, 600, 700, 800, MV7, X2 500, X2 550, X2 800, XP 550, XP 850 Trail Blazer 250 Trail Boss Xplorer Magnum 325, 500 Xpedition 325, 425 Worker 500.
  • Longer wheel studs are often required when using aftermarket wheels or when using wheel spacers..
Check Stock

4 Wheel Adapters 6 Lug 5.5" to 8 Lug 6.5"

  • 【Purpose】Convert from 6 lug vehicle to 8 lug wheel, meaning putting 8 lug wheels on 6 lug vehicle.
  • 【Fit Vehicle】Fit vehicles of 6x5.5" or 6x139.7mm bolt pattern. Your Garage filter is to confirm fitting of your vehicle only, not for the wheels..
  • 【Convert Wheel】Convert to wheel must be 8x6.5" or 8x165mm bolt pattern. Sold by 2 pairs (4 adapters).
  • 【Quality Assurance】Aircraft quality TRUE forged 6061 T6 lightweight billet. CNC machined with precision craftsmanship. Features in high load capacity and keep stock ride. Anodized for corrosion resistance. Heat-treated 10.9 grade steel studs with mounting lug nuts included..
  • Adapters will give you widened stance as well as more stability. If vehicle studs protrude outside the inner piece adapter, you will need to shave down vechile studs..
Check Stock

4 Wheel Adapters 8 Lug 6.5" to 6 Lug 139.7mm

  • 【Purpose】Convert from 8 lug vehicle to 6 lug wheel, meaning putting 6 lug wheels on 8 lug vehicle.
  • 【Fit Vehicle】Fit vehicles of 8x6.5" or 8x165mm bolt pattern. Your Garage filter is to confirm fitting of your vehicle only, not for the wheels..
  • 【Convert Wheel】Convert to wheel must be 6x5.5" or 6x139.7mm bolt pattern. Sold by 2 pairs (4 adapters).
  • 【Quality Assurance】Aircraft quality TRUE forged 6061 T6 lightweight billet. CNC machined with precision craftsmanship. Features in high load capacity and keep stock ride. Anodized for corrosion resistance. Heat-treated 10.9 grade steel studs with mounting lug nuts included..
  • Adapters will give you widened stance as well as more stability. If vehicle studs protrude outside the inner piece adapter, you will need to shave down vechile studs..
Check Stock

All Balls Racing 85-1041 Wheel Stud and Nut Kit, 1 Pack

  • THIS LISTING IS FOR EIGHT (8) STUDS. The studs you are purchasing have a 3/8" x 24 thread and are 1.75" long..
  • OEM Length replacement for the following UTV's. FITS: Polaris ACE 570, 900: 2017-2019--Polaris Ranger 500, 800, 800 XP, 900: 2009-2014--Polaris Ranger Crew 800, Crew 900: 2010-2014--Polaris Ranger XP 700, XP 800: 2009-2011--Polaris RZR 4 800, 900, 4 900: 2010-2014--Polaris RZR 570: 2014-2020--Polaris RZR Trail 570: 2022--Polaris RZR XP, XP 4 900: 2011-2013--Polaris Sportsman 500: 2002-2017.
  • 1/2" longer than stock for quads with 7515513, 7515523 wheel studs.
  • 1/2" longer than stock for the following ATV's: ATP 330, 350 Hawkeye 300 Outlaw 50, 90, 450, 500, 525 Predator 50, 90, 500 Scrambler 50, 90, 500 Sportsman 90, 300, 335, 400, 450, 500, 600, 700, 800, MV7, X2 500, X2 550, X2 800, XP 550, XP 850 Trail Blazer 250 Trail Boss Xplorer Magnum 325, 500 Xpedition 325, 425 Worker 500.
  • Longer wheel studs are often required when using aftermarket wheels or when using wheel spacers..
Check Stock

2 Pieces 1" 25mm Custom Lug Centric Wheel Spacers Adapters Bolt Pattern 4x100 to 4x100 Thread Pitch 12x1.5 Center Bore 67.1mm Compatible for Miata Mx-3 Drift JDM NA NB

  • Please be sure to confirm the fitment & compatibility prior to purchase - If you are not sure if this is applicable to your vehicle -please feel free to ask us!.
  • QTY: 2 Wheel Spacers .Designed to improve the handling & appearance of your vehicle.
  • Made with high grade T-6 Aluminum - CNC machined with precised fit.
  • Carbon steel wheel studs- machine pressed (Extremely durable).
  • Compatible for vehicles that are in 4x100 bolt pattern & 12x1.5 thread pitch and with center bore that is smaller than 67.1mm. Your Factory wheel studs may extend past the surface of the wheel spacers. In this case, you will need to: 1) Shorten the factory studs 2) The wheels need to have the open slots (cavities) between mounting holes. 3) Purchase a set of shorter studs and replace them with the factory studs..
Check Stock

Arctic Cat Extended ATV UTV Wheel Studs by R.A.D. DVX 90, 300, TRV 400, 500, 700, WILDCAT, PROWLER

  • Toughest ATV UTV Wheel Studs on the Market!! Grade 8 quality Studs 150,000 PSI Tensile Strength.
  • DVX 90, 300, TRV 400, 500, 700, WILDCAT, PROWLER.
  • cant fit your new wheels or wheel spacers on arctic cats stubby stock studs you need longer studs.
  • M10 X 1.25 Thread Extended Length 1.625in Long (stock is 1.275in).
Check Stock

EZAccessory 2 Wheel Adapter 5x5.5 to 8x6.5 (5x139.7 to 8x165) Thickness 2 inch

  • 【Purpose】Convert from 5 lug vehicle to 8 lug wheel, meaning putting 8 lug wheels on 5 lug vehicle.
  • 【Fit Vehicle】Fit vehicles of 5x5.5" or 5x139.7mm bolt pattern. Your Garage filter is to confirm fitting of your vehicle only, not for the wheels..
  • 【Convert Wheel】Convert to wheel must be 8x6.5" or 8x165mm bolt pattern. Sold by pair (2 adapters).
  • 【Quality Assurance】Aircraft quality TRUE forged 6061 T6 lightweight billet. CNC machined with precision craftsmanship. Features in high load capacity and keep stock ride. Anodized for corrosion resistance. Heat-treated 10.9 grade steel studs..
  • Adapters will give you widened stance as well as more stability. If vehicle studs protrude outside the inner piece adapter, you will need to shave down vechile studs..
Check Stock

4 Wheel Adapter 6x5.5 to 5x150 (6x139.7 to 5x150) Thickness 2 inch

  • 【Purpose】Convert from 6 lug vehicle to 5 lug wheel, meaning putting 5 lug wheels on 6 lug vehicle.
  • 【Fit Vehicle】Fit vehicles of 6x5.5" or 6x139.7mm bolt pattern. Your Garage filter is to confirm fitting of your vehicle only, not for the wheels..
  • 【Convert Wheel】Convert to wheel must be 5x150mm bolt pattern. Sold by 2 pairs (4 adapters).
  • 【Quality Assurance】Aircraft quality TRUE forged 6061 T6 lightweight billet. CNC machined with precision craftsmanship. Features in high load capacity and keep stock ride. Anodized for corrosion resistance. Heat-treated 10.9 grade steel studs with mounting lug nuts included..
  • Adapters will give you widened stance as well as more stability. If vehicle studs protrude outside the inner piece adapter, you will need to shave down vechile studs..
Check Stock

RockTrix 2 inch Wheel Spacers (4x4 Bolt Pattern, 68.5mm Bore, 12x.1.25 Studs, Cone Seat Nuts) Compatible with Yamaha Golf Carts (Widens Track by 4 inches) - 50mm 4x101.6 4pcs

  • RockTrix Wheel Spacers fits many 4/4", 4/101.6, 4/100 Bolt Pattern Golf Carts and ATVs. Buyers need to also verify: 1) Vehicle Centerbore is no larger than 68.5mm.
  • 2) Vehicle Wheel studs and lug nuts are M12x1.25 12x1.25mm threads.
  • 3) You have 2.0" (50mm) of space between your fender and your wheel/tire.
  • 4) Your current wheel studs are shorter than 2.0" (50mm). NOTE: If your wheel studs are too long, you may need to grind/trim the stud down to fit..
  • [SPECIFICATIONS] Four (4) Wheel Spacers | Thickness: 2.0" (50mm) Wide | Bolt Pattern: 4x4" (4x101.6 or 4x100) | Hub Center Bore: 68.5mm | Stud/Nut Thread Size: 12x1.25.
  • [BENEFITS] Increases clearance to allow installation of larger or wider rims/wheels/tires. Gives your golf cart or ATV body a more aggressive stance. Improves handling characteristics and stability. [MATERIAL & MANUFACTURING] Spacers are CNC Machined to exact specifications from high quality Aerospace Billet Aluminum. Undergoes anodizing process to prevent surface corrosion and rust. Includes heat treated 10.9 grade carbon steel studs. Precise machined stud/nut threads prevents cross threading..
  • [INSTALLATION] Requires standard tire repair tools, a torque wrench, and lug socket. While installation is simple and most knowledgeable buyers can i....
Check Stock