Top Wheel Installation Tool Reviews

DASBET 4 in1 Ball Joint Service Auto Tool Kit 2WD & 4WD Car Repair Remover Installer

... 1/2 and 3/4 ton four-wheel drive vehicles with Dana 30 or 44 front axles (compatible with Ford, General Motors, Dodge, IHC, and Jeep vehicles)..
Package Included: 1 x Ball Joint Press (C-Clamp), 1 x Jack screw (Forcing C-Screw), 1 x Installation Adapter, 1 x Removal Adapter, 1 x Installing Cup, 1 x Receiving Cup, 1 x Installation Cup Adapter, 3 x Receiving Tubes.

Check Stock

McGard 65515 Chrome SplineDrive Wheel Installation Kit M14 x1.5 Thread Size - for 5 Lug Wheels

Includes 16 Lug Nuts-1 Installation Tool-4 Wheel Locks-1 Key & 1 Key Pouch.
SplineDrive lug nuts offer closed-end design, maximum gripping power, more stud engagement and a greater seating surface than socket style lug nuts.
In addition they are 30% lighter in weight. Available in a variety of colors and styles. One is sure to match your wheel style or color. The black, gold or chrome plating on all of our lug nuts are guaranteed for life not to chip, peel or rust...ever! For aluminum wheels only. Box Kits include SplineDrive lug nuts, installation tool, tool storage pouch and chrome sleeve valve stems. Chrome, gold and black kits include 4 wheel locks, wheel lock key tool and I.D. card. Colored cap kits do not include wheel locks.
McGard’s plating process includes several layers of nickel and one layer of microporous chrome producing a superior finish while protecting against rust. Every lock is through-hardened and tempered. Manufactured in the USA to meet or exceed OEM standards..
Please note that wheel locks and lug nuts are application-specific products. You must confirm proper fitment for your vehicle by using the Amazon part finder or consulting our websit....

Check Stock

ABN Wheel Bearing Puller Kit Hub Removal Tool Wheel Bearing Tool - Independent Suspension Roll Ball Bearing FWD RWD AWD

[No More Hammer or Shop Press]: The ABN Master Wheel Bearing Removal Tool and Wheel Hub Puller Tool Kit allows you to remove and install wheel hub and....
[Fits Your Vehicle]: Universal for front, rear, and all-wheel drive vehicles with independent suspension and pressed roller-ball bearings.
[Use on Seized-Up Assemblies]: Self-centering mechanism and thrust bearing design.
Use the round plate that corresponds to the diameter of your....
[Perfect Sizes]: Universal set includes 21 pieces that have A through U permanently printed labels.
Pusher washer disk driver sizes from 2.1 inches....
[Contents]: Wheel hub and bearing puller set and installation kit includes a remover tool, adapter shoes, pusher washers, receiver sleeves, nut-bolt,....

Check Stock

WISPAUSU Master Wheel Bearing and Hub Remover Installer 27213 Bearing Removal from Spindle/Housing Back/Front Wheel Bearing Puller Back/Front Wheel Hub Puller Tool Kit

Why Need It -- Equal to 27213, born for both removal and installation of wheel bearing and hub. With this tool kit, you can not only remove wheel hub....
Save Time & Effort -- Even without a hammer/workshop press, it will make your wheel hub and bearing installation removal jobs a breeze. Professional....
Wide Applications -- Comes with lots of adapters, compatible with Bmw/Benz/Porsche/VW and most domestic/Asian/European vehicles, work for rear/front....
Reliable Quality -- Made of high carbon steel, anti-oxidant treatment, high hardness and durable for Heavy duty jobs. Each part of this tool is coated....
What You Get -- All the tool in the 1st picture. All marked with letters form A to U. We will provide 24 months warranty..

Check Stock

Hot Rod

VEHICLE FITMENT: Wheel Simulators perfectly fit for 1974-2005 Chevy GMC HD 3500/P30 2WD,Please check your vehicle’s year make and model to make sure it fits..
INCREDIBLY DURABLE: Easy Maintenance: Our simulators are all made for durable and long service life. Once installed, there’s no need to worry about changing them..
PERFECT LOOK: Wheel Covers made from 304L Wonderful shine Stainless steel which owes an elegant mirror polished finish, Offers an exciting and economical way to make you vehicle look great..
EASY INSTALLATION: Rim Covers engineered to factory specifications of special car, it’s easy to install and maintenance using bolt-on mounting style..
ITEM OFFERED: 2 X Front Wheel Simulator Liner Covers.

Check Stock

keep on looking / haint

PERFECT LOOK: Wheel Covers made from 304L wonderful shine Stainless steel which owes an elegant mirror polished finish, Offers an exciting and economical way to make you vehicle look great..
INCREDIBLY DURABLE: The Hubcaps are super sturdy and longevity, Once installed correctly ,they certainly will not fall off no matter the weather or road conditions..
EASY INSTALLATION: Rim Covers engineered to factory specifications of special car, it’s easy to install and maintenance using bolt-on mounting style..
VEHICLE FITMENT: Wheel Simulators is perfectly fit for 2003-2019 Dodge Ram 3500 , Please check your vehicle’s year make and model to make sure it fits..
INCLUDED: 2 X Front Wheel Simulator Liner Covers/2 Removable Center Caps.
2 X Rear Wheel Simulator Liner Covers/2 Removable Center Caps.

Check Stock

DPAccessories LCE3L6HESBK04024 24 Black 12x1.5 Closed End ET Spline Tuner Lug Nuts for Aftermarket Wheels

Extended Thread (ET) lug nuts are designed to help center lug-centric aftermarket wheels on the vehicle's wheel studs. Our ET lug nuts fit most lug-centric aftermarket wheels with a 16mm diameter lug hole and a conical lug nut seat..
ET lug nuts are NOT compatible with factory original OEM wheels. ET lug nuts do NOT provide additional thread engagement on your wheel studs. Applications that need more thread engagement may require extended length wheel studs to be installed..
SPECS: M12x1.50 thread - Closed End ET Spline Tuner Style Lug Nuts - Conical 60 Degree Seat - 39.88mm long - 20.07mm wide - 7.62mm shank length - 15.75mm shank width.
REQUIRES: 19mm and 13/16 in. (21mm) hex spline tool/key part #D5210K for installation and removal. One (1) tool included. Wheels are required to be lug-centric with a 16mm diameter lug hole..
INCLUDES: 24 Black Closed End ET Spline Tuner Lug Nuts and one (1) spline tool/key for installation. Shipped in our signature premium packaging..

Check Stock

(Both) Front Wheel Hub and Bearing Assembly fits Cavalier

Please Check Fitment Chart for Reference Before Purchase.
Specification: Position: Front Left and Right.
Kit Includes: (2) Front Wheel Hub Bearings Assembly.
Detroit Axle Wheel Hub Bearings are complete and ready for installation with no additional work or special tool required for installation.

Check Stock

XIUHUA 17 Inch 8 Lugs 5 Hand Holes Stainless Steel Wheel Simulators for 2011-2021 Chevy GMC 3500 Dually Wheel Truck

Built by 304 Stainless Steel, Nice Mirror Finish, Long Time Usable.
Over-The-Lug Mounting Style, Easy Installation.
Including 2 Front Wheel Covers, 2 Rear Wheel Covers, 8 Lug Nut Covers with Jam Nuts, 8 Stud Extenders, 1 Installation Tool.
Fits for 2011-2021 Chevy GMC 3500 Dually Wheel Truck..

Check Stock

VLAOSCHI Black Forged 6x5.5 to 5x4.75 Wheel Adapters 2 Inch Compatible with Chevy GMC 6 Lug to 5 Lug Adapter for Tahoe Suburban Silverado Sierra 1500 Adapt 5x120.65 Rim on 6x139.7 Vehicle - Pack of 4

【Benefits】These wheel adapters change bolt pattern, allow for installing 5 lug rims onto a 6 lug vehicle, designed to move the wheel further out....
【Features】VLAOSCHI wheel adapters are made from FORGED 6061 T6 aerospace aluminum, CNC precisely machined, undergoes anodizing process to prevent....
【Applications】These are 6x139.7 to 5x120.65 wheel adapters, change bolt pattern(Adapt 5 lug 4.75" rim to 6 lug 5.5" vehicle), compatible with....
【Specifications】Pack of 4 Wheel Adapters, FULL SET INSTALLATION HARDWARE. Thickness: 2" / 50mm | Vehicle Bolt Pattern: 6x5.5" / 6x139.7mm | Wheel....
【Installation & Warranty】Easy bolt-on installation, no special tool needed. All VLAOSCHI products are covered by two years warranty to be free of....

Check Stock

VLAOSCHI Black Forged 5x4.5 to 6x5.5 Wheel Adapters 2 Inch with 14x1.5 Studs Compatible with Jeep Ford-Dodge-Honda-Toyota-Lexus 5 to 6 Lug Wheel Adapter Adapt 6x139.7 Rim on 5x114.3 Car - Pack of 4

【Benefits】These wheel adapters change bolt pattern, allow for installing 6 lug rims onto a 5 lug vehicle, designed to move the wheel further out....
【Features】VLAOSCHI wheel adapters are made from FORGED 6061 T6 aerospace aluminum, CNC precisely machined, undergoes anodizing process to prevent....
【Applications】These are 5x114.3 to 6x139.7 wheel adapters, change bolt pattern(Adapt 6 lug 139.7 rims to 5 lug 114.3 vehicle), compatible with....
【Specifications】Pack of 4 Wheel Adapters, full set installation hardware. Thickness: 2" / 50mm | Vehicle Bolt Pattern: 5x4.5" / 5x114.3 mm | Wheel....
【Installation & Warranty】Easy bolt-on installation, no special tool needed. All VLAOSCHI products are covered by two years warranty to be free of....

Check Stock

STARTSHIP 708D 17″ Polished Stainless Steel Dually Wheel Simulator,4pc Durable and Nice Looking Hubcaps,8 Lug 5 Hand Hole Wheel Cover fit for 2003-2019 Dodge Ram3500

VEHICLE FITMENT: Wheel Simulators is fit for 2003-2019 Dodge Ram3500,Please check your vehicle’s year make and model to make sure it fits..
PERFECT LOOK: Wheel Covers made from 304L Wonderful shine Stainless steel which owes an elegant mirror polished finish, Offers an exciting and economical way to make you vehicle look great..
INCREDIBLY DURABLE: The Hubcaps are super sturdy and longevity,Once installed correctly ,they certainly will not fall off no matter the weather or road conditions..
EASY INSTALLATION: Rim Covers engineered to factory specifications of special car, it’s easy to install and maintenance using bolt-on mounting style..
INCLUDED: 2 X Front Wheel Simulator Liner Covers.
Limited Warranty and Custom Fit to specific Make, Model and Year vehicles. (Installation instruction is included,read User Instruction before installation).

Check Stock

Overdrive Brands Chrome 17\ Bolt on Hub Cap Wheel Covers for Chrysler 300 - Set of 4

VEHICLE FITMENT: Wheel Simulators Compatible with Ford F350 1974-1998.
Dodge Ram 3500 1974-1999, Fits trucks, vans, and RV's per years noted above..
INCREDIBLY DURABLE: The Hubcaps are super sturdy and longevity,Once installed correctly ,they certainly will not fall off no matter the weather or road conditions..
PERFECT LOOK: Wheel Covers made from 304L Wonderful shine Stainless steel which owes an elegant mirror polished finish, Offers an exciting and economical way to make you vehicle look great..
EASY INSTALLATION: Rim Covers engineered to factory specifications of special car, it's easy to install and maintenance using bolt-on mounting style..
ITEM OFFERED: 2 X Front Wheel Simulator Liner Covers.

Check Stock