Top Wheat Processing Machine Reviews

Chef Craft Select Wheat Straw Cutting Board and Knife Set, 10 inch x 7.5 inch, Blue

  • Contains a 10 inch x 7.5" cutting board and a paring knife with sheath.
  • Cutting board is Constructed of wheat straw, a natural byproduct of wheat processing providing a sustainable solution to material waste.
  • Light blue color will work in any kitchen.
  • Knife with sheath can be stored safely in a drawer.
  • Dishwasher safe for easy and convenient clean up.
Check Stock

Organic Cassava Flour, 8 Pounds — Non-GMO, Raw Yuca Root Powder, 100% Pure, Kosher, Vegan Superfood, Paleo, Bulk, Wheat Flour Substitute

  • FULL OF FIBER: Organic cassava flour goes through minimal processing, so it retains many of the root’s natural nutrients, including fiber..
  • DELICIOUS NUTTY FLAVOR: Cassava flour has a very mild but pleasant nutty flavor that can enhance the taste of your baked goods..
  • REPLACEMENT FOR ALL-PURPOSE FLOUR: When baking with cassava flour, you will get the same kind of fluffy baked goods as you would with white wheat flour..
  • FINE POWDER TEXTURE: Organic cassava flour isn’t gritty or chunky like the majority of other gluten-free flours..
  • GLUTEN-FREE WHEAT FLOUR SUBSTITUTE: Organic Cassava Flour is a fantastic substitute for wheat flour and contains no gluten whatsoever..
Check Stock

Tolsous Molino De Moler Maiz Electrico Maquina Corn Wheat Grain Mill Grinder for Flour Electric Grinding Machine with Steel Funnel para Rice Feed in Powder 110V Electrica

  • ...d the high-power motor with 2200W that can pour a large capacity cereals continuously into the funnel in rapid grinding...
  • IMPORTANT --This is a high speed commercial flour mill, it has the power of 2200W, grinding speed of more than 120 LB grains per hour, so it will make a big noise, suitable for commercial use in processing large quantities of grain, it can help the high efficiency grinding work, not suitable for the kitchen household (if you don't mind the noise, the grain mill is also a good choice).
  • HIGH QUALITY MATERIAL--Capacitor shell is made of iron galvanized material, the transport process will not be crushed, put an end to rust.
  • Heritage of traditional mill, innovative steel mill technology..
  • WIDELY USE - 2200W farm electric mill grinder can grind wheat, rice, corn, sorghum, soybeans, and other crops into dry powder.
  • Which is suitable for grinding bean curd, starch, rice flour, corn and used in other food industries.
  • WORKING CAPACITY --Cereals mill grinder Work capacity: Milling: (Corn ≤ 133lbs / h, Rice ≤ 166lbs / h, Wheat ≤166lbs / h, Paddy rice ≤ 110lbs / h).
  • Refining: (Soybeans ≤ 110lbs / h, Rice ≤ 110lbs / h)-- if machine can not work as expected, please email us for supports.
Check Stock

Baraka Whole Wheat Maamoul Cookies | Individually Wrapped Assorted Date Filled Butter Cookies | Healthy High Fiber Middle Eastern Dessert, No Preservatives, No Additives 16.9 oz (Pack of 12)

  • ...nd the world, Barak’s maamoul cookie is a sweet Middle Eastern cookie made from Dates, Whole Wheat Flour, Unsalted Butter (Cow Milk), Ghee (Palm Oil), Sugar, Semolina & Cocoa Powder..
  • MADE WITH 100% WHOLE WHEAT: While most fiber is removed from the white flour during processing, whole wheat flour has the natural level of fiber originally found in wheat. It’s also rich in B vitamins + has more iron, calcium, protein & other nutrients compared to white flour..
  • ONE DOZEN BULK PACK OF (12): This bulk set includes a whole dozen of our world-famous fresh baked maamoul cookies. You’ll have 12 date-filled cookies to keep for yourself or divvy up & give to others. Treat yourself to the flavors of Lebanon with these gourmet cookies!.
  • ALL 12 INDIVIDUALLY WRAPPED: Our buttery melt-in-your-mouth date cookies are all individually wrapped to preserve every bite of tasty freshness. Enjoy the whole wheat maamoul date cookies as light after-dinner desserts, pack them in lunches as grab-n-go snacks or share them..
  • BEST CHOICE FOR CELEBRATING: Serve these yummy date-filled treats to ....
Check Stock

Wood Router,Router Tool Wood Trimmer Router Electric Hand Trimmer Laminate Milling Engraving Hand Machine Joiner Tool Electric for Slotting Trimming Carving 110V 800W 30000R/MIN

  • ...tion of the machine. Anti-vibration, practical, simple operation, durable..
  • 【High-precision and easy operation】-The transparent base allows you to clearly see the trimming and easy operation. The transparent base design has high precision and is easy to identify during processing. Adjustable knob, scale can be adjusted..
  • 【Stable and non-deformation】- It includes some accessories, such as wrenches, trimming guides, straight guides, etc. The trimming guide rail and the rollers run along the curve to ensure accurate cutting and fine curve processing. Linear guide rail, thicker model is stable, no deformation, linear processing stable wooden wrench can tighten router head..
  • 【Wide use】-This electric trimming machine is widely used in wood processing, cabinet processing, handicraft production, plastic board, wood veneer and other similar materials chamfering, grooving, surface treatment, curve cutting, wood edge planning, pattern processing Homework activities and DIY. Easy wood trimming and slotting..
Check Stock

Organic Wheatgrass Juice Powder with Kamut | 75 Servings | Chlorophyll & Trace Minerals | No Maltodextrin & Sugar | Delicious Lemon Flavor

  • COLD PRESSED WHEATGRASS JUICE POWDER – Our organic, cold-pressed wheat grass juice powder is crafted using only the most premium growing and processing methods. Grown on ancient mineral beds our #1 ingredient, Kamut Brand Wheat Grass, is harvested at its peak and dried at a temperature under 106-degree F to retain key nutrients..
  • LEMON FLAVORED POWDER – This lemon-flavored powder contains chlorophyll, phytonutrients, and natural enzymes and is free of insoluble fibers. Our formula is easy to dissolve in water and ideal to add to your favorite beverage. Mix into water, smoothies, or any other beverages..
  • VEGAN AND GLUTEN FREE – The zero sugar and low-calorie formula is vegan and gluten free. Made with zero caffeine, cholesterol, soy, or dairy. 12 grams of our product is equivalent to a one-ounce shot of fresh cold-pressed grass juice, which is up to ten times more potent than the wheat grass itself..
  • SUGGESTED USE – Dissolve one scoop (2g) into an 8oz glass of water or a smoothie. Recommended to take daily on an empty stomach (20 minutes before or 2 hours after a meal). Store in a cool, dry place..
  • KETO APPROVED ORGANIC WHEAT GRASS SUPPLEMENT - The 1,800mg Organic Wheatgrass Powder provides key enzymes which may help support energy and digestion. ....
Check Stock

Davroe Hair Ends Repair Leave-in Treatment - 4.41 oz

  • Protects. Prevents split-ends from heat and processing..
  • Smoothing. Softens the hair and prevents flyways..
  • Adds shine. Vitamin E and Sunflower Seed Extract deliver hydration and shine to hair..
  • Strengthening. Wheat and Rice Proteins repair hair so it is stronger..
Check Stock

Chocomaker Caramel Apple Dipper

  • Add colour and fun to cookies, cupcakes, ice cream and more with this assortment of sprinkles..
  • 2.3 ounce/65 gram package containing 16 individually-wrapped sticks of sprinkles: 2 each of blue and yellow jimmies and pink, green, lilac, orange,....
  • Allergens: Wheat. May contain trace amounts of soy due to common processing equipment..
  • Package contents may differ from photograph..
Check Stock

Country Living Hand Grain Mill

  • -Interval : 10minutes -Working time : 5 minutes.
  • Material: Good quality stainless steel material makes the machine durable, which could provide you a long service life.
  • High power and high grinding speed, let the machine more efficient than the traditional motor models.
  • The grinder is suitable for dispensary, medicine processing factory and powder processing.
  • The machine adopts ultra high-speed motor, can quickly smash all kinds of dehydrated food, rice, corn, sesame, soybean, fish feed, pepper, medicine (such as ganoderma, licorice, tianqi, pearl etc).
Check Stock

Mini Metal Lathe Machine CNC DIY Tool Benchtop Wood Lathe Woodworking for Hobby Sience Education Modelmaking, AC110V 50/60HZ (Ship from USA)

  • ...gence of children. So as to be a good didactical tool for children. It is also an ideal tool for DIY hobbyist and modelmaker to make various craft. .
  • This is a Micro desktop lathe which can used for turning, drilling, boring, threading and other processing Made of advanced aluminum alloy, durable and non-deformable for usage. Note: When processing harder materials, the feed rate should be smaller, and the operation of aluminum and copper materials should be slow. Patience is required.which is slower than processing wood..
  • Processing Materials: Wood, Plastic, Aluminum, Copper and other Soft Metal,CAN'T Processing Alloy,Brass Rod.Note: The harder the material, the smaller the depth of cut.we offer several shims for you to adjust the height of the turning tool..
  • Note: The machine defaults to use high speed motor. If you need a low speed motor, please contact us.This machine is a micro lathe and cannot achieve high precision. Please check the size of the accessories.Three-jaw chuck clamping diameter: 13mm claw, 45mm reverse claw. If you have requirements for high precision, please consider purchasing....
Check Stock

2 Axis Metal Case LCD DRO Digital Readout Display for Mill Milling/Lathe Machine (2 Axis DRO)

  • ...RO value will be saved. 2 :Determine the workpiece centre: Only through the tool or touching the two points of workpiece, the DRO can calculate the workpiece centre.
  • 3 :200 sets tool base: While repeat the same process in the workpiece, you can store the tool value which will be convenience to the operator Round arc processing: Sample round processing and two axis arc processing.
  • 4:Slope calculation: Input the two points of workpiece, the DRO can calculate the slope of the workpiece..
Check Stock

uxcell Chucking Reamer 5/16\

  • GREAT QUALITY: These reamers are made of high speed steel, high hardness for rust protection, durability and long service life,with oxidation surface has good strength of extension and corrosion resistance in many environments..
  • MAIN FUNCTION: Applicable for reaming to mold processing and handicraft processing..
  • WIDE APPLICATION: Widely used for bore machining, installed in drilling machine, milling machine, etc..
  • MATERIAL: Processed surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
  • SHANK DIAMETER: 3/4/5/6/7/8/9/10/11/12mm..
Check Stock

Micro 100 SFPM-050-10 Square End Mill - Upcut, 5 mm Cutter Dia, 16 mm LOC, 1 Fl, 5 mm Shank Dia, 50 mm OAL, Uncoated

  • END MILL CUTTER: Mill Cutter, usually used to be assembled on milling machine. Suitable for CNC data processing center, carved, high-speed machines..
  • WIDELY USE: Can milling of copper, aluminum, tool steel, cast iron, etc..
  • HIGH TOUGHNESS: High toughness, abrasion resistance, high-speed cutting for the high hardness..
  • EASY TO USE: Can processing directly or fine processing to the heat treatment mold..
  • SAVING TIME: Reducing the number of tool changes, improve machine actuator movement rhythm, save mold making time..
Check Stock