Top Weldment Chassis Reviews

Husqvarna 583512901 Lawn Tractor Spindle Right Hand

  • This spindle (part number 583512901) is for lawn tractors.
  • This part is compatible with models including.
  • 917204021,917203850,917986441,917250841,917986440,917250842,917204020,917288533,917288532,917288661,917288662,917288660,YT48CS-96043022400,YT48CS-502130,PP24KA54-96042019300,917255840,917986431,96042019400,917203861,917986430,917203860,917250830,917250831,917204030,917204031,96043022400,917288663,YT42CS-502120,917288672,917288673,917288670,917288671,GT54CS-502140,502140,YT42CS-96043022200,917250220,917250221,917203830,917250222,917288517,917288515.
  • Please Note: May not fit all specs of above models listed, please consult owner's manual for proper part number identification and proper installation.
Check Stock

VeVe Inc. T-923; Pontoon Trailer Roller Guide-On, 1 Pair (Zinc Plated Finish)

  • 1 Pair, Zinc Plated, Pontoon Trailer Roller Guide-Ons ( AMERICAN MADE ).
  • 28” tall steel tube weldment gives the 13" Roller assembly a height adjustment up to 29-1/2" high..
  • Roller Guides mount to trailer cross members ( on inside of pontoons ) for width adjustment..
  • Complete with mounting hardware to fit frames 2"-3” W. x up to 4” H..
  • “Zinc Plated” finish ( For FRESH WATER use )!.
Check Stock

HITOWMFG 2" Bolt-On Receiver Opening Hitch Tube

  • Fit standard 4-hole pintle hook pattern (bolts&screws not inclue), bolt this tube weldment to the hitch plate using four 1/2" grade 8 bolts, lock washers and nuts.
  • 20,000 lbs max gross trailer weight, 2,000 lbs max vertical tongue load, use 5/8 inch pin.
  • The receiver accepts accessories for 2" x 2" receiver tube opening.
  • Finished in black power coating provide durable and strong conditions, resist dust and corrosion, adds extra durability, can be used with an anti-rattle kit.
  • Heavy duty steel via robotically welded for superior strength provide excellent mounting facility, high quality hardware fittings, all make this adjustable trailer hitch more durable.
Check Stock

Magnum Enterprises Rubberband Shooter Ammo - Short Rifle Ammo-Yellow (Size 33, 4-oz. Bag)

  • THIS IS A SET OF 4 RECTANGULAR RUBBER PADS FOR WHEELTROINCS , SNAP ON , AMMCO* , AND MAGNUM 2 POST LIFTS..
  • THESE ARE ALSO FOUND ON SPACE SAVER ALIGNMENT RACKS ON THE ROLLING JACKS. THESE PADS ARE EXTREMELY DURABLE AND ARE FORMED AROUND A SOLID PIECE OF METAL. THESE USE ONE CENTER BOLT IN THE MIDDLE OF THE PAD TO SECURE IT TO THE FOOT/ WELDMENT OF THE LIFT..
  • THEY FIT THE FOLLOWING MODEL LIFTS AND MAY FIT OTHERS NOT LISTED -WHEELTRONICS LIFT- T10, T9, 8144 V , SPACE SAVER 12000 , AND MANY OTHER MODELS.
  • AMMCO* LIFT- S21NSR1 , S21NXPR1 ,S21NSB3 , S21NSR3 S21NRM1 AND OTHERS -MAGNUM- MANY MODELS WITH ROUND PADS -SNAP ON- MOST MODELS.
Check Stock

HiLetgo GY-291 ADXL345 3-Axis Digital Acceleration of Gravity Tilt Module for Arduino IIC/SPI Transmission

  • 【What You Get】: You will get: a whole complete robot tank car chassis named as T900 = 2 sets of T300 tank car chassis, which including mainly: 4pcs DC encoder motors, 4pcs plastic tracks, 5 parts of metal frame, 40pcs bearings, a bag of screw kits and other parts. These Parts are UNASSEMBLED, and You can download the T300 car chassis (since T900=2sets T300) manual in this link to assemble it..
  • 【Large Size & Big Load】: As for the whole robot chassis, ONLY the track is engineering plastic track, all of the others are metal, and thus the structure is very solid, which can be loaded about 0-6kg. T900 car chassis is also have large size, about L*W*H=550*280*110mm. So, this car chassis is used for VR video monitor or tracking..
  • 【Personal Novel Design】The robot car chassis is designed up to date. The track or caterpillar is adjustable to suit for the length of the car chassis, and each load bearing wheel is encapsulated with 2pcs bearings, which can reduce the friction of wheel. The assembling manual can be downloaded from this link or at gitnova..
  • 【DC Encoder Motor】: This encode motor can be used for the speed measurement / test. For example, if you let the car moving forward along a line, you should fully use the speed difference about two mo....
Check Stock

Dilwe RC Steel Chassis Frame Rails Spare Part Fit for AXIAL SCX10 90027 SCX10 II 90046 90047

  • Fit forThe chassis frame rails is compatible with AXIAL SCX10 90027 SCX10 II 90046 90047 RC crawler.
  • Include Left and RightThe chassis frame rails is included two chassis frame rails, a left and a right..
  • High-qualityRC car chassis frame rails is made of quality material, sturdy and durable, suitablr for daily use, ensure long serve time..
  • Upgrade PartThe chassis frame rails is a set of great upgraded accessory for you favorite model car..
  • Easy to CarryThe chassis frame rails is lightweight and compractical, easy to install and remove..
Check Stock

Mophorn 50KG Rotary Welding Positioner Turntable Table 110V 120W Angle 0 to 90° Welding Positioner Positioning Turntable 310mm Diameter Welder Positioner Turntable Machine 200mm Lathe Chuck

  • Working Capacity: 50KG/25KG: Horizontal/Vertical loading capacity:50kg/25kg.
  • Working table diameter/heigh: 310mm/380mm.Made of stainless steel, features high quality and durablility..
  • 0-90° Tiltable Table: The turning structure of worm and gear has the function of self-lock, and the worktable can be turned steplessly between 0-90°. It also can be fixed at any angle you want..
  • Three-jaw Welding Chuck: Three jaws are reinforced to avoid the weldment pieces from moving and falling.It is upgraded to be more accurate and more practical..
  • Stepless Speed Control: Using foot switch to control table rotation, the speed is regulated by the knob on the machine(0.5-5r/min stepless speed regulation)..
  • Time-controller: Time-controller can be furnished to control the working condition and working time, which can achieve the linkage of the positioner and welder..
Check Stock

BMZX Tesla Model 3 Skid Plate Front Chassis Guard Plate Aluminum All Weather Heavy Duty Protection

  • Customized for the front chassis guard plate of Model 3.
  • Protecting the motor and strengthen the protection of the connected battery coolant pipe..
  • Why we need to replace: The original resin chassis guard plate is very vulnerable to damage, a slight collision is likely to damage the internal motor. If the chassis protection plate is broken, we will face high repair costs, but using our aluminum alloy chassis guard plate can avoid this situation..
  • Main functions: Prevent motor from being damaged by impact, anti-scratch, anti-abrasion and anti-corrosion.
  • No need to worry about chassis damage, all-weather protection motor, driving more peace of mind..
  • Durable Material: aluminum alloy with strong thermal conductivity, thickness of about 2.7mm, with heat dissipation and anti-impact performance far beyond the original resin chassis guard plate.
  • Installation: Screw hole is customized according to the original resin chassis guard plate, alignment hole can be directly replaced with the new one. Easy no-drill installation uses vehicle’s existing attachment mounts.
Check Stock

SZDoit Professional Smart Robot Tank Car Chassis miniTP101, Remote Control Robotic Platform for Arduino Raspberry Pie Learning Kit, RC Crawler Robotics, Remote Control Tracked Car Caterpillar Chassis

  • [Rich Manual]: The assemble manual is attached with the items. More details, can be found at gitnova. We provide many types of smart robot tank car chassis for you, also provide the referred Arduino source code controlled by WiFi, Bluetooth, and ps2..
  • [Good Helper]: Learn to robot assembling.
  • learn to Arduino / raspberry pie project learning.
  • when you get the robot chassis miniTP101, you will firstly install it, and then code programming on the controller, e.g., Arduino, to drive the car move..
  • [Good Price]: This smart car chassis is made by metal frame with 2 high torque DC motor with big batches once time in ourselves factory. So it has the good price for this robot crawler car chassis. Also, we open many plastic, rubber, metal mould for the robot chassis. Anyone can contact us if have a good quantity..
  • [Good Motor]: This car chassis is assembled by 2pcs high torque motor, which can have a good performance for the tracked robot chassis research. It will help you to realize the functions by coding using python or C computer language. Together with the electronics controller, one can DIY the remote control robot chassis fast and easily..
  • [What You Get]: All the metal part, 2pcs track (the length can be changed as any l....
Check Stock

Robot Car Crawler Tank Treads Tracks with Gear for Robot Tank DIY (Not includ Idler Wheels)

  • 【Unassembled Tank Chassis】: Tank chassis is UNASSEMBLED when you received, which can aims to learn the mechanical structure. It is different from car chassis, which has the track and wheels. By this way, tank chassis can move smoothly in the complex environment, like grassland, sand, and and many little stone. If the car, will be easy to rollover. But the tank chassis has much more width wheel, so can easily pass these cases..
  • 【Necessary for This Car】: Robot technology is difficult. It covers robotic mechanics structure, software, electronic hardware. So, it is necessary to learn the robot for a long time. By using this car robot frame, you will learn the assemble, controller, and code program..
  • 【Code Programming】: When you get this car chassis, you should learn more to let the car move. E.g., you can use arduino controller board and many sensors to make some projects, like obstacle avoidance, tracing, automatic driving, AI learning..
  • 【Metal Panel】: This tank chassis is designed for the metal panel with 2 plastic track and 4 wheels. But the price is not valuable. It is very suitable for the student for the arduino/raspberry pie/microbit learning. In the manual, we just provide the referred arduino code with wifi, bluetooth control mode..
Check Stock

Traxxas Slash 2WD On-Board Audio GRAY CHASSIS, BATTERY HOLDER & BODY NERF BAR by Traxxas

  • Main Chassis (Part # 5822) Gray Composite Nylon Construction Specifications: Length: 338mm (13.3") Width: 189mm (7.44") Height: 23mm (0.91") Thickness: 2mm ( 0.08") Battery Hold Down, Retainer, Post and Body Clip ( Part # 5827 Partial, no foam block) Two (2) Chassis Nerf Bars (Part # 5823) Plastic ConstructionParts Requried for Complete Slash 2WD OBA Conversion: OBA Body* (New bodies have mounting holes for the speakers) OBA Chassis* (New chassis has mountin.
  • Includes: Chassis (Part # 5822) Battery Hold Down (Part # 5827) Chassis Nerf Bars (Part # 5823) - This product is NEW in OEM Retail Packaging..
  • Important Note: The first image is for illustration purposes only. Please refer to the product description for exact contents..
  • Requires Assembly: This product is NOT ASSEMBLED. Any assembly pictured is for illustration purposes only..
  • Part number(s) included (in factory packaging): 5822 5827 5823.
Check Stock

Traxxas 5830 Low-CG Conversion Kit for 1/10 Scale Slash 2WD, Blue

  • Complete Low Center-of-Gravity chassis conversion kit for 2WD Slash models.
  • Low center of gravity enhances handling and increases cornering speed.
  • Includes chassis, lower chassis, Nerf bars (2), battery hold-down.
  • front and rear battery retainers, and front shock springs.
  • Complete kit, no additional parts required.
Check Stock

SZDoit Premium Robot Tracked Tank Car Chassis Starter Kit with DC Motor, Robotic Caterpillar Moving Crawler Platform Track for Arduion Raspberry Pie Microbit Python DIY Maker Remote Control RC Toy

  • 【Tank Chassis】: Tank chassis is different from car chassis, which has the track and wheels. By this way, tank chassis can move smoothly in the complex environment, like grassland, sand, and and many little stone. If the car, will be easy to rollover. But the tank chassis has much more width wheel, so can easily pass these cases..
  • 【Necessary for This Car】: Robot technology is difficult. It covers robotic mechanics structure, software, electronic hardware. So, it is necessary to learn the robot for a long time. By using this car robot frame, you will learn the assemble, controller, and code program..
  • 【Code Programming】: When you get this car chassis, you should learn more to let the car move. E.g., you can use arduino controller board and many sensors to make some projects, like obstacle avoidance, tracing, automatic driving, AI learning..
  • 【Metal Panel】: This tank chassis is designed for the metal panel with 2 plastic track and 4 wheels. But the price is not valuable. It is very suitable for the student for the arduino/raspberry pie/microbit learning. In the manual, we just provide the referred arduino code with wifi, bluetooth control mode..
  • 【What You Get】: You will get a complete TP101 tank car chassis kit, which includes 1pcs * metal....
Check Stock