Top Welding Negative Connector Reviews

uxcell 17pcs DIP IC Chip Socket Adaptor Round 28 Pin 2.54mm Pitch Dual Row 15.24mm Row Pitch

Row to Row Distance(Approx):15.24mm/ 0.6".
As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.

Check Stock

uxcell 20pcs DIP IC Chip Socket Adaptor Solder Type 2.54mm Pitch Dual Row 8 Flat Pin 7.6mm Row Pitch

As the carrier of the IC chip, the IC connector can replace the chip and PCB board for repeated welding and disassembly without damaging the chip, achieving the effect of saving IC cost and time.
When installing,first solder the chip to the IC connector, and then solder the IC connector to the PCB board.
when you need to install or replace the chip, directly remove the connection between the IC connector and the PCB board, without changing the chip and connector Connection..
Advantages-IC connector has strong vibration and heat resistance, can withstand repeated welding and disassembly, convenient installation, and easy to use.
Noted - The spacing and line spacing of the connector holes must be the same as the spacing and line spacing of the chip pins.

Check Stock

2-pin 8 mm LED Connector kit LED3528 Connector L-Shaped Connector 2 Needle Angle Connector T-Shaped Connector weldable Seamless Connector Jumper Connector (8 mm)

LED connector kits apply to 2835 3528 2-pin 8 mm LED lamp strip. Not suitable for 10 mm connectors.
2 needles 8 mm LED connector support 0-4A current and 0-24V voltage input, heat resistance level is -20 to 100 degrees.
Note: When the waterproof LED is connected to the LED lamp strip, the silica gel on the surface of the weld region must be peeled off..
Easy to install. Connect the positive and negative poles of the connector. Simply insert the lamp bar into the connector and clamp the cover. No soldering and other processes.
It is easy to install, according to the positive and negative connections of the connector, simply insert the lamp bar into the connector and clamp the cover. No soldering and other processes..

Check Stock

Eastwood 200 AMP AC/DC TIG Welder With 1/4 Inch Thick Welding Capacity

Square-Wave Inverter for Accurate Aluminum Welding.
Rocker Style Foot Pedal with Machine Mounted Controls.
Stick Welding Feature - Welds in AC/DC Positive or Negative.

Check Stock

YaeTek 12PCS Oxygen & Acetylene Torch Kit Welding & Cutting Gas Welder Tool Set with Welding Goggles

Application - Welding and Cutting -- This YaeTek gas welding torch kit is used for cutting, welding, heating, with precision and efficiency..
Material -- heavy duty metal and brass, with high strength, durability, longevity. This welder torch Kit tool set is a great choice for both an amateur metalworker or a professional..
With a divisional box, convenient and easy to carry..
Packages Includes -- 3 copper pines, 1 welding pine connector, 1 cutting, 1 aluminum pin, 1 iron chrome-plated igniter, 2 copper joint, 1 wrench, 1 welding goggles, 1 storage box.

Check Stock

Miller 129527 Conn,Tw Lk Insul Male(Dinse Type)50 Series

Premium quality Dinse-style insulated cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
Insulated Dinse-type male connector is with .355" diameter pin (25-mm) and 1/2" diameter pin (35-50mm, 50-70mm and 70-95mm)..
Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..

Check Stock

Lenco 05335 International Dinse Type Machine Plug Adapter, Male and Female Connection

Welding cable quick connector male-female pair with accessories..
DINSE style connection. For AWG wires #6-#4 (16-25 sq mm) with 100Amp-200Amp current rating..
You get Two (2) quick cable connector pairs 100Amp-200Amp with accessories at this price..
Amazon satisfied customer service & fast ship.Please provide a deliverable address..
We are manufactory of welding accessories, if you need a large number of accessories. Please contact us!.

Check Stock

Good Sealing Compression Ferrule Connector Tee Effective Sealing Tee Equal Diameter 316 for Natural Gas for Complicated Pipeline for Solar Energy(Ф6)

DN15 Double ferrule bulkhead connector thread specification is ф1/2 ,external thread size is 20.3mm/0.8in,internal thread size is 19.5mm / 0.8in and the error is 19.5mm/0.8in..
Double ferrule bulkhead connector adopts double ferrule type installation,reusable,simple and convenient operation, and can be removed freely.No welding is needed, which is good for fire prevention, crack prevention, high‑altitude operation and can eliminate the disadvantages caused by inadvertent welding..
DN15 Double ferrule bulkhead connector has strong connection, high pressure resistance, tightness and repeatable installation, the installation and maintenance are simple and convenient, and the work is safe and reliable..
DN15 Double ferrule bulkhead connector selected high‑quality stainless steel 316 materials,the surface of the connector is finely ground by a special process, slick and delicate, the interior is clean and bright, and the tolerance control is accurate..
The manufacturing and production of the products follow strict product quality control standards, the product performance is stable, and the quality is reliable. You can use it for a long time with confidence..

Check Stock

Welder Machine Accessories 5 in 1 Stick Welding Electrode Holder 300A Assembly with 12ft Cable 10-25 Cowhide Gloves Mask Helmet Ground Clamp Hammer

✅Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer.
✅HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications..
✅Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks.
✅300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft).
✅5 IN 1:Multi-purpose household and welding repair tool kit.

Check Stock

DN15 Removed Freely Stainless Steel Double Ferrule Bulkhead Connector 20.3mm/0.8in External Thread 19.5mm/0.8in Internal Thread(Ф1/2)

DN15 Double ferrule bulkhead connector thread specification is ф1/2 ,external thread size is 20.3mm/0.8in,internal thread size is 19.5mm / 0.8in and the error is 19.5mm/0.8in..
Double ferrule bulkhead connector adopts double ferrule type installation,reusable,simple and convenient operation, and can be removed freely.No welding is needed, which is good for fire prevention, crack prevention, high‑altitude operation and can eliminate the disadvantages caused by inadvertent welding..
DN15 Double ferrule bulkhead connector has strong connection, high pressure resistance, tightness and repeatable installation, the installation and maintenance are simple and convenient, and the work is safe and reliable..
DN15 Double ferrule bulkhead connector selected high‑quality stainless steel 316 materials,the surface of the connector is finely ground by a special process, slick and delicate, the interior is clean and bright, and the tolerance control is accurate..
The manufacturing and production of the products follow strict product quality control standards, the product performance is stable, and the quality is reliable. You can use it for a long time with confidence..

Check Stock

SÜA Oxygen and Acetylene Gas Cutting, Welding and Heating Set - Medium Duty Torch - Plastic Box - Model: Wyvern V

This Set includes: Oxygen and Acetylene Regulators, Medium Duty Torch with Model: 3-101-1 Acetylene Cutting Tip Compatible with Victor, 3 x W-1 series Welding Tips, Heating Tip, 15 feet Twin Hose, Single Flint Striker, Oxyfuel Goggles, Tip Cleaner and Spanner..
Can cut up to 6” with additional tips and up to 1” with the provided #1 tip. – Can weld or braze up to 1/2” with additional tips and up to 1/16” with the provided tips..
Acetylene Tank Connector: CGA-510 Fits Big Acetylene and Propane tanks EXCEPT Small Sizes MC and B (check all pictures for reference) - Oxygen Tank Connector: CGA-540 Fits all American Oxygen Cylinders..
Cutting attachment is compatible with Victor series 3 Acetylene and 3-GPN Propane Cutting Tips and Series 100 Handles. The Torch Handle is Compatible with W-1 Acetylene Welding Tips, MFA-1 Series Acetylene and MFN-1 Series Propane Rosebud Heating Tips..
This heavy-duty oxyfuel cutting and welding set is manufactured using high quality, strong materials. Durable and sturdy it is perfect for amateurs, DIY´s metalworker, or seasoned professionals, for industrial, farm, or home applications. Can be used on various processes such as welding, soldering, brazing, riveting, cutting, hard-facing and metal heating process..

Check Stock

LotFancy Battery Terminal Connectors Tinned Brass 4PCS Quick Release Disconnect Car Battery Terminal 4 Way Positive Negative for SAE/JIS Type A Posts

【4 Way Battery Terminal】Pack of 4. This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
【Dimension】For wires diameters 4.1 – 8.2mm (AWG gauges 0 – 16) or section 13.5 – 53.5mm². Minimum wire size: 16mm (5/8"). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
【Sturdy & Durable】The battery terminals are made of tinned brass, with good electrical conductivity and corrosion resistance, which can reduce voltage distortion and transmission loss.
【Wide Application】These battery terminal connectors can be used for Cars, Vans, Caravan, Motorhomes, Truck Batteries, Car Audio, etc. Ju....

Check Stock

LotFancy Battery Terminal Connectors, Tinned Brass, 2PCS Quick Release Disconnect Car Battery Terminal, Positive Negative for SAE/JIS Type A Posts

【4 Way Battery Terminal】This battery terminal connector has 4 post for wire connection. Designed for multiple cable connections. The provided Alan wrenches make for easy installation. Wiring is easy to modify. Convenient wiring and firm connection. Fits on round post auto batteries SAE/JIS Type A posts. NOTE: Do not overtighten the screws.
【Dimension】For wires diameters 5.2 - 7.4mm (AWG gauges 1 - 4) or section 16 - 35mm. Minimum wire size: 16mm (5/8 inch ). Max wire clamp: 9.5mm/0.37in, Mini wire clamp: 6.5mm/0.25in. After installing battery, connects to the battery posts by pressing down the lever, so no tools needed.
【Positive & Negative Labeled】 Positive (17.5mm-19.1mm) Battery Terminal Connector + Negative (15.9mm-17.5mm) Battery Terminal Connector. The Positive Negative Battery Terminal Clamp is Suitable for Most Battery models. Works great for replacing worn out and corroded terminals.
【Sturdy & Durable】The battery terminals are made of tinned brass. Tinned brass is brass coated by a base alloy such as solder better known as tin. It strengthens the brass's natural properties, making it better equipped to resist humidity, high temperatures and wet environments.
【Wide Application】These battery terminal connectors can be used for ....

Check Stock