Top Welding Fixture Plate Clamps Reviews

4 Pcs Locking C Clamp Set Locking Pliers with Fixed and Swivel Pads 6 Inch 9 Inch 11 Inch Metal Tools Welding Clamps for Home Farm

Locking C Clamp Set: 4 welding clamps are included, including 1 piece of 6 inch locking C clamp with fixed pad, 1 piece of 6 inch locking C clamp with swivel pad, 1 piece of 9 inch locking C clamp swivel pad and 1 piece of 11 inch locking C clamp with swivel pad, meeting your everyday needs.
Sturdy to Use: the jaw is forged with carbon steel as a whole, featuring with good toughness.
The handle of stamped steel plate, clamping object without deforming.
The heat treatment adjusting rod is easy to adjust the suitable size.
Additionally, the serrated jaw of locking C clamp has a strong clamping force.
Adjustable Design: the locking C clamp is easy to adjust to the appropriate clamping size because of the fine tuning knob design.
The quick release handle is convenient and labor saving.
Moreover, the spring provides good tensile force.
Firm Locking: welding clamps are mainly applied for clamping parts for riveting, welding, grinding and other processing.
Since the jaw can generate large clamping force, the clamped objects will not loosen.
Essential Supplies: in daily life, the lock C clamp is suitable for electricians and welders to clamp welding boards.
And woodworkers can use this metal tool to quickly clamp boards or frames.

Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

[Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
[Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
Fits 3/16-inch to 26 gauge sheet metal materials.
[Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
Tighten the winged nut to ensure a secure hold.
Use all 8 clamps for larger projects, then joint weld between them.
[Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
[Contents] Welding accessories set includes 8 welding corner square welder clamps.
Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.

Check Stock

Drive Roll Kit 0.02-0.03\ Solid Wire, 0.440 lbs

...sily secure your fixture in place with 235 lb strong holding force. Whether doing woodwork or fabrication, simply drill a hole in a fixture and place the Jig in hole to use for downward pressure clamping. Strong Hold to flat and round surfaces to provide straight edge cuts.
CARPENTER OR WELDER: Great addition to any welding or carpentry tools. Similar use to c, right angle, 90 degree, spring, square and corner clamps. Frame fences, assembly jigs, cutting and gluing fixtures, blade guards, work supports, framing, installing cabinets or anything that makes your DIY crafts faster, safer and easier.
ON/OFF SWITCH: The true ON and OFF capabilities create a platform that is more efficient, faster, safer and easier to use! Magnetic grip turns all the way off for quick release. No need to pry or fight magnet for precise positioning. Does not use an electrical power source.
FEATURES: 3/4 inch standoff for flush mount. Designed with screw holes to add more security in a fixture. Use with the Magswitch woodworking starter kit, including featherboard attachment and universal mounting base. Use with a router table, woodworking bench, or wood jointer.
EASY TO CLEAN: Powerful magnet stays clean unlike traditional magnetic squares that hold on to metal chips even when o....

Check Stock

Butt Welding Clamps, Sturdy Durable 16pcs Butt Welding Clamps ,for Sheet Metal Auto Car Truck Door Skin Panel, for Precision Butt Welding and Edge to Edge Welding(16pcs)

High-quality and durable:This set of clips has excellent performance in precision butt welding and edge-to-edge welding. The butt welding tongs are made of galvanized steel, rust-proof, heat-resistant and durable. The smooth metal surface prevents rust, is not easy to deform, and has a long service life..
Professional welding clamp tools:Each welding square tool tube clamp can extend the clamp block, leaving a 0.040 inch (1cm) gap between the panel and the edge welding. Suitable for straight or curved plates. The minimum gap of the welding plate is about 1 mm, which can be adjusted to a farther position as needed..
Good performance: These clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
Professional use:Sheet metal welding tongs are designed for welding operations. Very suitable for welding cracked metal floors, automotive sheet metal surfaces, door skins or prefabricated panels assembled in re-skinning projects. These clips can fix panels of any shape anywhere..
Easy to use:After spot welding the two panels together, remove the wing nut release device and toggle, just remove the fixture from the work befor....

Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

Butt Welding Clamps includes 16 welding corner square welder clamps.
Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
Fits 3/16-inch to 26 gauge sheet metal materials.
Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
Tighten the winged nut to ensure a secure hold.
Use all 16 clamps for larger projects, then joint weld between them.

Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
Fits 3/16-inch to 26 gauge sheet metal materials.
Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
Tighten the winged nut to ensure a secure hold.
Use all 16 clamps for larger projects, then joint weld between them.
Package Included: Welding accessories set includes 16 welding corner square welder clamps.
Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.

Check Stock

OBPSFY 5 PCS Magnetic Welding Clamps Set,Adjustable V-Pads Fixture Clamp Hand Tools,Magnets On Both Pad Face and Bottom

【Welding Clamp】* Hold tabs,pipe, gussets, plates and odd shaped pieces in position for tack welding.Light duty & tight spot holding! Build, Hold, and Position Steel.Magnetic tack welding Tool，make welding easier..
【Strong Hand Tools】* Adjustable welding magnet, Magnetic welding holder, hold and position round, flat, and square parts in light duty substructure applications! Time saving magnetic tools for welding..
【Material】* The magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.Magnets on both pad face and the bottom,Can hold the workpiece well for welding work..
【Note】* Avoid Pronlonged exposure to high heat. The Magnets may demagnetize with temp. exceeding 185°F.（Heat Warning）.
【Package】* 5 Pack Magnetic Welding Clamps（2" ，Pull Force 12 lbs.）.

Check Stock

Cylinder Pneumatic Clamp Air Clamp Hold Down Clamp with U-Bar, GH-12130 Air Toggle Clamp

METAL MATERIAL: This pneumatic clamp is made of high-strength metal material, which is anti-oxidation, wear-resistant, strong and reliable.
STABLE OPERATION: Built-in air flow control provides smoother operation during repetitive clamping operations than manual clamps.
HIGH EFFICIENCY: The pneumatic clamp can shorten test time,and improve production efficiency which reduce labor intensity of workers.
WITH U-BAR: Holding screw moves on the U-shaped hold-down bar for larger clearance angle.
WIDELY APPLICATION: The pneumatic clamp can be used in welding, fixture, mold and other positions.

Check Stock

Spurtar 6pcs Welding Magnet Welding Magnets and Clamps 75lbsX2+50lbsX2+25lbsX2 Magnetic Welding Holder 3 4 5 Arc Welding Electrode Holders 45 90 135 Degree Mig Welder Welding Accessories and Tools

STRONG POWER: 6 pieces different sizes welding magnet supports any ferrous metal object up to 25 lbs, 50 lbs, 75 lbs, satisfying all kinds of needs.
SAFE & SECURE: These welding magnets and clamps grip metal and hold it at the angle you need to work safely and efficiently. The welding holders are compact with durable high gloss enamel end plates.
THREE ANGLES: Heavy-duty arrow design steel welding magnet square supports material at 45°, 90°, and 135° for easy access. Can be used as double sided holder for welding, assembly and marking work.
MULTIPURPOSE: The magnetic welding holder clamps connects parts, freeing up your hands for efficient work and improve work safety, and it can also be used as a floater to separate steel plates.
EFFICIENCY: Spurtar Welding Magnet Set Magnetic Tool Holder s ideal welding tools and accessries for being used as holder and positioner in welding, soldering, marking off, pipe installation, making your welding job more efficiently and precisely..

Check Stock

Right Angle Clamp ,90 Degree Corner Clamp with Adjustable Double Handle Corner Clamp for Woodworking the Working of Framing Drilling Welding Doweling Making Cabinet Installing Furniture

HIGH QUALITY: The Right Angle Clamps is made of strong aluminum alloy materials, will not rust or crack , and can easily drill diagonal holes to make the joint perfect. At the same time, this fixture can create flush, angular shapes. angle clamp connector suitable for woodworking the working of framing drilling welding doweling making cabinet installing furniture.
CONVENIENT AND FAST: Drill inclined quickly and easily to hide the screws in the wooden furniture. 90° drilling angle to ensure accurate screw connection, please note: the max thickness for this angle clamps can fix up to 2.3inches (58mm).
EASY TO USE: It works smoothly and has no burrs, and its easy to drill Right Angle to hide screws in wooden furniture, which helps improve work efficiency.
Portable & CARRY: Weight 0.34kg small size can be held by one hand, DIY woodworking tools and can realize precise screw connection.
CUSTOMER SERVICE:If you have any problem or question of our product, please contact us via e-mail , our Customer Service will respond within 24 hours.

Check Stock

Magswitch MagJig 235 Magnetic Woodworking and Welding Base Clamp Holder for Wood Working Supplies, Accessories, Tools and Equipment, Magnet Switch with On/Off Capabilities, 235 lb Holding Force

...sily secure your fixture in place with 235 lb strong holding force. Whether doing woodwork or fabrication, simply drill a hole in a fixture and place the Jig in hole to use for downward pressure clamping. Strong Hold to flat and round surfaces to provide straight edge cuts.
CARPENTER OR WELDER: Great addition to any welding or carpentry tools. Similar use to c, right angle, 90 degree, spring, square and corner clamps. Frame fences, assembly jigs, cutting and gluing fixtures, blade guards, work supports, framing, installing cabinets or anything that makes your DIY crafts faster, safer and easier.
ON/OFF SWITCH: The true ON and OFF capabilities create a platform that is more efficient, faster, safer and easier to use! Magnetic grip turns all the way off for quick release. No need to pry or fight magnet for precise positioning. Does not use an electrical power source.
FEATURES: 3/4 inch standoff for flush mount. Designed with screw holes to add more security in a fixture. Use with the Magswitch woodworking starter kit, including featherboard attachment and universal mounting base. Use with a router table, woodworking bench, or wood jointer.
EASY TO CLEAN: Powerful magnet stays clean unlike traditional magnetic squares that hold on to metal chips even when o....

Check Stock

TRRAPLE Magnetic Welding Clamps, Adjustable V-Type Fixture Clamp, 2/4 Pcs Durable Stainless Steel Tab Holder Corner Butt Welding Panel Clamps Tools

HIGH QUALITY WELDING CLAMPS -- Our v-type magnetic welding clamps are made of made of high quality stainless steel, sturdy and durable, can be used for a long time..
MAGNETIC HOLDERS -- One rare earth magnets in each pad provide secure gripping power for rapid, and convenient, holding and positioning..
EASY TO USE -- Pads pivot to hold onto round, square, or flat metal surfaces, easy to install and apply..
PERFECT SPOT WELDING CLAMP -- Hold tabs, gussets, plates and odd shaped pieces in position for tack welding..
WIDELY APPLIED -- Widely used on doors, tool boxes, windows, wooden case, furniture and so on..

Check Stock

ZGRM C Clamps Set, 2-Inch C Clamp Heavy Duty C Clamps for DIY Carpentry Woodwork Building ( 4pcs)

Data: 2 in C clamp: 2 inch jaw opening and 1.5 in throat depth,Single weight 0.45 ib.
High-grade materials: The movable parts are made of precision milled heat-treated chromium plate carbon, which will not deform even under high pressure. Steel provides reliability and corrosion resistance..
Wide range of applications: C-clamps are powerful and versatile, and can fix parts for assembly, fastening, bonding and welding. Widely used in furniture manufacturing, metalworking and automotive applications, this reliable tool can ensure that everything is in the right place..
Easy to use: The thread on the screw allows it to slide smoothly without sticking or binding. The floating jaw pad maintains uniform contact with the work surface when pressure is applied. The sliding handle bar provides multiple hand positions for the best leverage and the most comfortable grip..
C clamps part failure during use, please contact us in time we will give you a satisfactory solution.

Check Stock