Top Welding Cover Sheet Reviews

Gauge Metal Sheet Thickness Gauge Metal Gauge Tool Stainless Steel Thickness Gauge ONE-Sided Material Wire Thickness Gauge Plated Size Inspection Tool (3)

Portable: pulling this metal gauge tool out of your pocket to measure metal is quicker and easier than using a tape measure.
Material: made of quality stainless steel, anti-rust and corrosion resistance, so the metal thickness gauge welding can serve for a long time application to avoid frequent replacement.
Package includes: you will receive 3 pieces of metal sheet thickness gauge, and the size is 1.0 inch in width and 2.8 inch in length.
Practical handy tool: you can determine the thickness of the material before welding or processing and measure the most popular welding thickness quickly and accurately.
Must-have accessories: the sheet thickness gauge is useful for checking metal sheet wire size before welding or working, and is also durable and easy to read.

Check Stock

FLKQC Butt Clamps 16 pcs Butt Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding Butt Clamp

Butt Clamps Specification:Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
Fits 3/16-inch to 26 gauge sheet metal materials.
How To Use Butt Welding Clamps : Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
Tighten the winged nut to ensure a secure hold.
Use all 16 clamps for larger projects, then joint weld between them.
Great Quality Butt Welding Clamps: Panel welding clamps are constructed of galvanized steel material to ensure maximum durability and strength while resisting rust.
Butt Clamps Wide Application: Use the Welding Square Clamp Set to pinch sheet metal panels level to each other.
While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
Butt Clamps Package Included: Welding accessories set includes 16 welding corner square welder clamps.
Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.

Check Stock

JEGS MIG/MMA 180 Welder | 220V AC | Includes Gas Regulator, MMA Clamp, Welding Torch, Ground Clamp & Cable, Hand Held Mask, And Wire Brush

EASY TO CARRY with the help of a built-in handle.
WELDING VOLTAGE AND WIRE FEED are adjusted with one control according to thickness of the welded sheet.
LENGTH OF THE ARC/WELDING HEAT is trimmed with another control, and once the right value is found there usually is no need to change it even when welding a thicker or thinner sheet.
ENJOY WELDING with freedom, flexibility, and ease of setting up and dialing in your welding project with the simple control design.
SPECIFICATIONS: 220V AC, Duty Cycle: 25% @ 180A/60% @ 117A, Wire: 7.87 “ Reel x 0.030 “ - 0.035 “.

Check Stock

HANSWAY High Temp 24\X36\X1/4'' Felt Carbon Fiber Welding Blankets Black (24 x 36 inches)

✅【Suitable Size】the aluminized fiberglass sheet measures 18 x 24 inch/24X36inch/36X36inch/ large size to use in daily life, you can simply trim the sheet into wanted shape or size to satisfy your various projects, thickness 6mm, 21oz./sq. yd.
✅【Reliale material】 This welding blanket protection is made of carbon fiber fabric, durable and reliable to use, can provide ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime..
✅【High temperature resistance】: The welding blanket can withstand high temperature, you could do welding works or daily use. Reflective temperature of 1000F, withstands radiant heat up to 2000F.
✅【Convenient to apply】: Great efficiency in heating and cooling. Widely used for draping over equipment or floor surfaces in welding areas,or as a vertical shield to protect from sparks,spatter,and slag.
✅【After-Sale Guarantee】—- We offer lifetime service for welding blanket from our store. Any issue about this carbon fiber welding blanket, please feel free to contact us..

Check Stock

HANSWAY High Temp 18\ X 24\ X 1/8\ Carbon Fiber Welding Blanket Protect Work Area from Sparks & Splatte (18 x 24 inches)

✅【Reliale material】 This welding blanket protection is made of carbon fiber fabric, durable and reliable to use, can provide ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime..
✅【Suitable Size】the aluminized fiberglass sheet measures 18 x 24 inch/24X36inch/36X36inch/ large size to use in daily life, you can simply trim the sheet into wanted shape or size to satisfy your various projects.
✅【High temperature resistance】: The welding blanket can withstand high temperature, you could do welding works or daily use. Reflective temperature of 1000F, withstands radiant heat up to 2000F.
✅【Convenient to apply】: Great efficiency in heating and cooling. Widely used for draping over equipment or floor surfaces in welding areas,or as a vertical shield to protect from sparks,spatter,and slag.
✅【After-Sale Guarantee】—- We offer lifetime service for welding blanket from our store. Any issue about this carbon fiber welding blanket, please feel free to contact us..

Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
Fits 3/16-inch to 26 gauge sheet metal materials.
Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
Tighten the winged nut to ensure a secure hold.
Use all 16 clamps for larger projects, then joint weld between them.
Package Included: Welding accessories set includes 16 welding corner square welder clamps.
Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.

Check Stock

Katofa Vehicle Panel Spot Puller Dent Spotter 3500A Spot Welder Dent Puller for Car Auto Panel Dent Bonnet Door Repair 110V Spotter Welding Machine

★ [Main functions]--Carbon rod warming and tempering, washer welding, sheet upsetting, needle welding, wiggle wire welding and so on..
★ [Application]--Sheet metal fire, meson, straight pull, spot welding, flattening, wave line, stud, OT film, triangular and so on..
★ [Feature]--110V, 3500A. Intuitive, the control knob enables selection of both the output power and the requested mode.More intelligent and welding....
★ [Easy to use]-- Manual, the weld is simply controlled by a light press of the gun trigger.The machine thermal protection will work when the main....
★ [Quality Guarantee]--We provide 1 month warranty for free return and 6 monthes for free replacement part in case of non-human reasons！！.

Check Stock

2 Pcs Stainless Steel Thickness Gauges, Wire Gauge Measurement Tool-Round Wire Cable Sheet Thickness Gage and Wire Thickness Gauge

✅【Premium Material】Our wire gauge measurement tool are made of high quality stainless steel, it has anti-rust and anti-corrosion properties. long term to use..
✅【Package Include】 Package Include 1 piece of round dual sided wire gage and 1 piece of metal sheet thickness gauge.with very clear numbers and letters.avoid unnecessary errors..
✅【Size Detail】Dual-Sided Round Wire Gauge: 0-36 American standard.
Wire Sheet Thickness Welding Gauge: 24GA (.0239), 22GA (.0299), 20GA (.0359), 18GA (.0478), 16GA (.0598), 14GA (.0747), 1/8" (.0125), 10GA(.1345), 3/16" (.1875), 1/4" (.250), 5/16" (.3125), (.024"), (.030"), (.035")..
✅【Practical Tool】They are profesional tool, use the gauges tool to determine the thickness of the material before working. saving time and material, help you accurately correct..
✅【Wide Application】Dual-sided round wire gauge can gauge plate iron and steel, leather, paper, wood. wire metal sheet thickness welding gauge can check metal sheet wire size before welding or working..

Check Stock

E6013 - General Purpose/Mild Steel - Welding Electrode/Rod - 14" x 1/8" (PACK: 44 LB)

All-position, mild steel electrode for welding light to medium-gauge steel. Common uses include tack welding on thin sheet metal such as galvanized sheets, automobile bodies, metal furniture, window frames, fences, storage tanks, farm equipment and iron grills.
Excellent operating characteristics when using small diameter electrodes to weld thin sheet metal using lower open-circuit AC voltage.
One of the easiest electrodes to use because of its easy slag control in vertical down welding, its wide operating range and restrike capabilities.
This electrode has a soft, steady and quiet arc that produces very little smoke or spatter.
Select your Electrode Diameter and Package Quantity from the Options - Check Picture #3 for Welding Parameters..

Check Stock

JHTII 2 Piece Stainless Standard Gauge Thickness Tool, Round Dual Sided Wire Gauge & Sheet Thickness Welding Gauge

Round Dual Sided Wire Gauge: 0-36 US standard, the dual sided clear digital scaledesign makes it easy to read marks from all directions..
High Quality Material: Made of stainless steel.Through multiple processes, not easy to deform and abrasion resistant, to ensure maximum strength and durability, it will not rust in dry environment, compact and light in weight, easy to carry and easy to store..
Sheet Thickness Welding Gauge Function: This Metal Gauge is the most useful and helpful for checking metal sheet wire size before welding or working. You can get a precise and accurate data ahead of welding, avoiding unnecessary mistakes..
Size: Wire/Metal Sheet Thickness Welding Gauge:24GA (.0239), 22GA (.0299), 20GA (.0359), 18GA (.0478), 16GA (.0598), 14GA (.0747), 1/8" (.0125), 10GA(.1345), 3/16" (.1875), 1/4" (.250), 5/16" (.3125), (.024"), (.030"), (.035").
Dual-Sided Round Wire Gauge: 0-36 gauge (0.19-8.23mm).
Useful Handy Tools: Using these gauges to determine the thickness of material before working in order to save time and material. The quality is great, and the numbers are very easy to read, even if the tool is dirty, you can still read without problems, it’s a profesional tool, heavy and feels great on the hand..

Check Stock

ZeeDix 2 Pcs Stainless Steel Metal Sheets Welding Thickness Gauge- Wire Gauge Measurement Tool Standard Dual-Sided Round Wire Cable Sheet Gage and Wire Welding Material Thickness Gauge

Packing:1 round double-sided metal wire gauge + 1 metal plate thickness gauge.This product can help you check the wire diameter of sheet metal before welding or working.You can get accurate data before welding to avoid unnecessary errors..
Clear digital scale: double-sided compass: 0-36 US standard. The two-sided design makes it easy to read marks from all directions. You can see the numbers clearly without squinting..
High-quality material: Made of stainless steel, it has anti-rust and anti-corrosion properties. It is durable, it will not rust in dry environment, and it is easy to store. You can use it for a long time without changing it frequently,compact and light in weight, easy to carry..
Useful handy tools: Use these gauges to determine the thickness of the material before working to save time and material, they can help you quickly and accurately correct and resolve any wrong thickness, simply like to use this tool, the quality is great, and the numbers are very easy to read, even if the tool is dirty, you can still read without problems, it’s a profesional tool, heavy and feels great on the hand..
Widely used: Measuring uncoated steel, steel and steel, leather, paper, wood, bolts, etc..
wire / metal sheet thickness welding gauge,check the wire ....

Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

[Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
[Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
Fits 3/16-inch to 26 gauge sheet metal materials.
[Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
Tighten the winged nut to ensure a secure hold.
Use all 8 clamps for larger projects, then joint weld between them.
[Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
[Contents] Welding accessories set includes 8 welding corner square welder clamps.
Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.

Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
Fits 3/16-inch to 26 gauge sheet metal materials..
【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
Tighten the winged nut to make sure a firm fixation.
Use all 16 clamps for larger projects, then perform joint welding between them..
【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..

Check Stock