Top Welding Cable Connector Reviews

Welder Machine Accessories 5 in 1 Stick Welding Electrode Holder 300A Assembly with 12ft Cable 10-25 Cowhide Gloves Mask Helmet Ground Clamp Hammer

  • ✅Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer.
  • ✅HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications..
  • ✅Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks.
  • ✅300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft).
  • ✅5 IN 1:Multi-purpose household and welding repair tool kit.
Check Stock

EBOOT 20 AWG JST Plug Connector 2 Pin Male Female Plug Connector Cable Wire for LED Lamp Strip RC Toys Battery, 10 Pairs

  • Total cable length: approx. 210 mm/ 8.3 inch.
  • 2 Pin JST connector, one side for plug the other side for welding.
  • Package including: 10 pairs JST plug connector with cable wire (10 pieces female, 10 pieces male).
  • This JST plug connector is suitable for most mini RC helicopter, LED strip light and good for connecting motor, ESC battery.
Check Stock

WeldingCity 3-pk Dinse-Type Twist-Lock Insulated Connector Pair (Male/Female) for Welding Cable AWG #2-1/0 (35-50mm) | Pack of 3 Pairs

  • 4 pairs of premium Dinse-type cable connector pair (male/female) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Male connector is with Dinse-type pin of .355" diameter (25-mm small) and pi of 1/2" diameter (35-50mm, 50-70mm and 70-95mm)..
  • Compatible with Dinse-type twistlock connectors in mainstream welders ( Miller, Lincoln, ESAB, etc.). Available connector sizes 16-25mm (small 0.355" pin, #4-#3), 35-50mm (1/2" pin, #2-1/0), 50-70mm (1/2" pin, 2/0-3/0) and 70-95mm (1/2" pin, 3/0-4/0)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps. 3-pair per package..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

KINGQ Welding Cable Joint Quick Connector Pair DINSE-Style 100Amp-200Amp (#6-#4) 16-25 SQ-MM 2-set

  • Premium Dinse-type insulated cable connector pair (male/female) and female terminal adapter (threaded stud to Dinse male connector) for use with welding cable connection in welders from Lincoln, Miller, ESAB, etc..
  • Insulated Dinse-type male connector is with .355" pin diameter (25-series) and 1/2" pin diameter (35/50/70-series). 45° angle terminal adapter with 17/32" stud hole and female acceptor for 1/2"-pin male plug..
  • Compatible with Miller 25-70 series Dinse twistlock connectors/adapters and fit other mainstream welders (Lincoln, ESAB, etc.) with Dinse connection: Miller 25-series (small 25-mm, #4-#3, P/N 127836/127835).
  • 50-series (35-50mm, #2-1/0, P/N 129527/129526).
  • 70-series (50-70mm, 1/0-3/0, P/N 134460/136600). Female terminal adapter is compatible with Miller 232728 (50/70-series, 1/2"-pin)..
  • All connectors/adapters are equipped with heat and oil resistant covers as well as cable connection screws and copper splice caps..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

RIVERWELD TIG Welding Cable Panel Connector-plug and Socket Dinse Dinze Quick Fitting 315Amp (2, DKJ35-50)

  • Cable Panel Connector /Euro Style Cable Connector-plug Fit all TIG Welding and Plasma Cutter Machine.
  • 1pcs DKJ35-50 Connector with Black Color..
Check Stock

9TRADING Replacement Mig Welding Gun Stinger Torch Lead 4 Clarke 130EN 180EN Welder Parts

  • The gun is 10 ft long, and will handle .023", .030", and .035" steel, stainless steel, and flux cored wires..
  • There is a gas valve in the handle, so this gun can be used with or without gas..
  • The gas hose extends 6 ft beyond the end of the gun, the trigger wires have the correct connector for the 130EN and 180EN welders, and the cable which carries the welding current extends 20" past the end of the gun..
  • You can see the gas hose, trigger connector, and the welding current cable in the second picture..
  • This gun uses the same Clarke contact tips, gas nozzles, and gas diffusers..
Check Stock

ABN L5-50R Connector – 50 Amp Twist Lock Inlet Locking Power Cord Connector Locking Power Inlet Plug 50A 125/250V

  • CONNECT YOUR CABLE: Use your generator, transfer switch, welding equipment, trailer, RV camper power inlet with this ABN Inlet Locking Connector.
  • KEEP OUT PESTS: Replace your power cord with this twist lock connector so the cord can be removed and stored without leaving an opening that mice or....
  • SECURELY HOLD CABLE: This connector comes with strain reliefs that mount inside the base of the connector to hold the cable (clamp for the cord).
  • PERFECT SIZE: Approximate measurement across the face is 2 inches (5.1cm).
  • Across the back where the cord enters adds 0.25 inch (2.25 inches / 5.7cm....
  • Remove housing by loosening face screws and slide over cable (If a weather-resistant boot is used, slide this over....
Check Stock

150 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #4 AWG cable (15 FEET)

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #4 AWG - 0.343" O.D..
  • Electrode Holder compatible with AF-3. Constructed with Heavy Duty Nylon body. High conductivity jaws and cable connectors. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4"..
  • Dinse 10-25 Cable Connector. ***Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
  • RATED: 150 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
  • Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..
Check Stock

150 Amp Welding Ground Clamp Lead Assembly - Dinse 10-25 Connector - #4 AWG cable (15 FEET)

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #4 AWG - 0.343" O.D..
  • Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing.
  • Dinse 10-25 Cable Connector. ***Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
  • RATED: 150 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
  • Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..
Check Stock

200 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (15 FEET)

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D..
  • Electrode Holder compatible with AF-3. Constructed with Heavy Duty Nylon body. High conductivity jaws and cable connectors. High strength coiled spring for a maximum grip of the electrode. Holds Electrodes up to 1/4"..
  • Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
  • RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
  • Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..
Check Stock

200 Amp Welding Ground Clamp Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (15 FEET)

  • Heavy Duty Welding Lead Assembly manufactured with Made in USA Flex-A-Prene highly flexible cable. Cable Size: #2 AWG - 0.418" O.D..
  • Ground Clamp compatible with EG-300. Constructed in Zinc-Plated Steel. Large hex screw cable connection assures a tight and safe cable connection. It has a large contact area for an effective ground connection. Its design eliminates arc blowing and facilitates fast grounding spot changing.
  • Cable Connector Options: LC-40 (Cam-Lock), Dinse 10-25, Dinse 35-70 or Terminal Lug. ***Please select your option from the menu, check the connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits***.
  • RATED: 200 AMP @ 60% Duty Cycle. ***Please Check you welder´s maximum amperage and look for a cable assembly that matches or exceeds that amperage rating***.
  • Choose the Cable Length from the Menu. These leads are assembled to customer specifications the same day the order is received, they are packed and shipped on a cardboard box or a white USPS Flat Rate Package. You will receive a ready to use fully assembled lead, no tools required..
Check Stock

Stick Electrode, 1/8 in. dia., 10 lb.

  • 200 AMP Electrode Holder – The comfortable, lightweight electrode holder is rated for 200 amps of current at a 20% duty cycle..
  • 12.5 FT Cable Length - The assembly features a flexible copper welding cable which is 12.5 FT in length..
  • Twist-Mate / Dinse Connector – The assembly features twist-mate / dinse connector is which is compatible with the Power MIG / Weld-Pak 140, Power MIG 180, Power MIG 210mp, SquareWave TIG 200 and many other Lincoln or competitor power sources..
  • TRUSTED BY PROFESSIONALS – This electrode holder assembly is used by professional fabricators on a daily basis..
  • For use with 3/32, 1/8 or 5/32 Stick (SMAW) electrodes..
Check Stock

Weldpro 155 Amp Inverter MIG/Stick Arc Welder with Dual Voltage 240V/120V welding machine, spool gun capable

  • ... of the switch inside the welders drive roller housing enables spool gun operation..
  • The MIG155GD can run .023, .030, and .035 MIG and flux cord wire. No need to disconnect electrical terminals change polarities. With the Mig 155 GD changing polarity is as simple as swapping the dongle cable from plus to minus dinse connector right on the front of the machine..
  • Packaged with multiple drive rollers, both smooth and knurled for flux core welding, a reel of flux core wire, and a gas regulator for MIG welding, along with a stick welding electrode stinger, the MIG155GD is ready to handle most any DC welding needs..
  • Portable, capable and versatile, still with the ability to run 120V as well as 240V this little powerhouse is tough to beat. PDF product manual is also available on the Weldpro website. 3 Year Warranty.
Check Stock