Top Weld on Tie downs Reviews

CURT 83072 1-5/8-Inch x 3-1/2-Inch Raw Steel Weld-On Trailer Stake Pocket Tie Down Anchor

  • VERSATILE. This weld-on stake pocket anchor is great for securing cargo loads on heavy-duty flatbed trailers and flatbed trucks.
  • HIGHLY VERSATILE. Add versatile towing options to your vehicle with this class 1 trailer hitch. It provides a standard, square 1-1/4-inch receiver hitch and comes with a ball mount with a 3/4-inch ball hole to connect a small trailer.
  • EASY TO USE. Once installed, this trailer stake pocket is fast and convenient to use. The 3-1/2-inch x 1-5/8-inch opening can be used to fasten down ropes, cables, ratchet straps or binder chains. It is also perfectly sized to accept a 2x4 stud.
  • HEAVY-DUTY. This stake pocket tie down is constructed from solid steel for heavy-duty strength.
  • READY TO WELD. This trailer stake pocket tie down comes with a raw steel finish to be ready for welding right out of the package.
Check Stock

DC Cargo Mall Four Weld-On Winches for Flatbed Trailer | Heavy Duty Standard Tie-Down Winches

  • USE FOR TOUGHEST LOADS – Trust these four (4) robust flatbed winches to hold your load tight even when your truck meets a rough road. Heavy-duty steel winches apply strong tension to the strap to hold the toughest loads. Powder-coated for long-lasting corrosion resistance..
  • PERMANENT INSTALLATION – Weld-on winches provide a permanent tie-down system for your truck or trailer..
  • PRECISION ENGINEERED: Bottom mount. Standard profile fits up to 30 ft of strap. Fits winch straps up to 4 inches. Dimensions: 5.5” tall x 3.5“ wide x 8” long..
  • EVERYTHING YOU NEED IN A TIE DOWN WINCH – Strong, reliable, and corrosion-resistant. Includes (4) winches. Assembly break strength: 16,500 lbs. Working load limit: 5,500 lbs..
  • Tie-downs meet or exceed DOT requirements..
Check Stock

AUTOBOTS 1/2" Heavy Duty Bolt-On Forged D Ring, 12000Lbs Break Strength Tie Down Anchors Hooks, for Trailers, Trucks, and Cargo Tie Downs (Pack of 4) Black

  • CONVENIENTLY&QUICKLY- Install with Drilling, No Need for Welding. By threading a screw or bolt through the 1/4" diameter bolting hole on the mounting clip and securing to any wood or metal surface. The trailer D-ring tie down is easy and convenient to use once installed. It provides an anchor ship for all cargo tie downs. (： .").
  • HEAVY-DUTY- 12000 lbs Strength. The D ring tie down anchor are made of heavy-duty steel for safety and durability. This trailer tie down ring is ideal for heavy duty applications acting as the foundation in tie down technique while moving cargo in your truck or trailer. The D ring has a remarkable working load limit allowing it to accommodate tractors and other heavy freight..
  • DURABLE- 6mm Reinforcing Plates. These weld on d rings are the most trusted to provide unique, simple solutions for specific everyday needs, with anti-rust coating on the surface, which is strong, corrosion-resistant, not easy to rust, and have excellent strength, durability and long service life. Bolt-on D ring provides you with the superior durability your towing needs call for..
Check Stock

Weld-On Tie Downs 1/4 Steel Tri-angular Chassis Bracket 4

  • Made in the USA, with Domestic Materials.
Check Stock

2 Pcs M18x1.5 Thread Adapter, 304 Stainless Steel

  • 【Material】The mounting bung is made of stainless steel(Stainless Steel 304 for corrosive environments, rigid and durable body design), easy to weld on O2 sensor parts, exhaust, headers, down pipes, etc..
  • 【Installation】Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
  • 【Size】M18X1.5 thread adapter, confirm the product size before buying..
  • 【Parameter】Use for your custom sensor install, exhaust, down pipe, headers, exchangers and other installations where weld-in or weld-on metric connection is needed..
  • 【Package include】 2 PCS M18 Mounting Adapter. It comes with 1 year warranty. Any problems just contact us to resolve..
Check Stock

Heavy Duty Weld On 2x4 Steel Stake Pockets for Trailer & Truck (8)

  • 3" Tall, 1.5" Inside Depth x 3.5" Inside Width (Holda a 2x4 Piece of Lumber).
  • 7 GA Steel Design for Heavy Duty Applications.
  • Perfect For Adding Walls and Tie Down Points to Trailers, Flat Beds & Trucks.
Check Stock

Professional EZ Travel Collection 12 Metal Rebar Stake with Tie Loop 6-Pack

  • 1" Diameter Loop Weld for Bungee Balls or Other Tie Down.
Check Stock

Dust World (Undying Mercenaries Series Book 2)

  • Allows use of back-up or secondary fall protection device such as a self retracting lifeline when required.
  • Permanently weld to existing structure in locations of frequent use, or where use of a portable base is impractical.
  • Bare metal design is ideal for weld-on applications, must be finished after installation or used in environments without chemcial or moisture exposure.
  • Does not include any finish or plating making it easy and safe to weld to existing steel structures.
  • Bare steel uni-anchor with tie-off anchor for Advanced portable fall arrest post.
Check Stock

Metal Warrior: Born of Steel (Mech Fighter Book 1)

  • Allows use of back-up or secondary fall protection device such as a self retracting lifeline when required.
  • Permanently weld to existing structure in locations of frequent use, or where use of a portable base is impractical.
  • Bare metal design is ideal for weld-on applications, must be finished after installation or used in environments without chemcial or moisture exposure.
  • Does not include any finish or plating making it easy and safe to weld to existing steel structures.
  • Bare steel uni-anchor with tie-off anchor for Advanced portable fall arrest post.
Check Stock

Hand Crank Landscape Tarp Roller Kit with Mesh Tarp for Dump Truck or Trailer by Kym Industries Inc Mesh 7 x 18

  • Aluminum Hexagon Roller Tarp Axle Telescopes To Desired Bed Width (48" to 102").
  • Folding Steel Hand Crank with Rubber Handle, 20' Pull Rope, Rope Tie Downs and 2 Rubber Tarp Straps with S-Hooks.
  • Detent Locking Handle To Stop Tarp From Unrolling.
  • Durable Black Mesh Tarp or Black 18oz Vinyl Tarp Available with Grommets Every 24".
  • Steel Mounting Brackets For Durabiltiy. Bolt On or Weld On. All Mounting Hardware Included.
Check Stock

Robbor 5/16 inch Chain Hook Grade 70 Weld On Grab Hook Designed to be Welded onto Flatbed Trailers, Tractors and Other Similar Equipment

  • Robbor 5/16 inch Weld-on Grab Hook Made from Grade 70 steel,Compatible with Grade 70 Tie Down Chain systems.
  • Robbor 5/16 inch Grab Hook Provides a 4.700WLL and 16,500 Lbs Breaking Strength..
  • These Grab Hooks Manufactured with Cutting-Edge Technology for Easy Welding.
  • Designed to be Welded onto Flatbed Trailers, Tractors and other Similar Equipment.
  • Precision Manufacturing to Meet or Exceed Standards.
Check Stock

Mounting Bungs and Plugs Stainless Steel M18 x 1.5 Thread Notched Style Exhaust Weld in Bung with Gaskets 2 Sets

  • The mounting bung is made of stainless steel, easy to weld on exhaust, headers, down pipes, etc..
  • Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
  • The bung cap can be used to seal sensor bungs that are not being used in the exhaust system. The gasket helps create a tight seal to prevent any....
  • The M18*1.5 bung features a notched style, making it easy to weld by having the curve sit against the rounded surface of the exhaust or downpipe..
  • The weld in bung and plug set features a straight thread size of M18*1.5 mm, which is suitable for most vehicles..
Check Stock

Capital Safety 8517412 Advanced Confined Space System, Bare Steel Uni-Anchor with Tie-Off Anchor for Advanced Portable Fall Arrest Post, Gray

  • Allows use of back-up or secondary fall protection device such as a self retracting lifeline when required.
  • Permanently weld to existing structure in locations of frequent use, or where use of a portable base is impractical.
  • Bare metal design is ideal for weld-on applications, must be finished after installation or used in environments without chemcial or moisture exposure.
  • Does not include any finish or plating making it easy and safe to weld to existing steel structures.
  • Bare steel uni-anchor with tie-off anchor for Advanced portable fall arrest post.
Check Stock