Top Weld on Exhaust Systems Reviews

J-B Weld ExhaustWeld 2\ x 72\ Repair Wrap

J-B WELD EXHAUSTWELD: A high strength fiberglass wrap, impregnated with a specially formulated resin for high temperature resistant repairs. ExhaustWeld can resist up to 1100°F once it is fully cured!.
CURE AND SET TIME: ExhaustWeld can cure with or without heat! It will cure within 20 minutes if heat is applied to it with either a heat gun or by letting the engine run. Without heat, ExhaustWeld will set in 20 minutes and cure in 2 hours..
HIGH HEAT RESISTANCE: Once fully cured, J-B Weld ExhaustWeld Exhaust System Repair Wrap has a temperature resistance of 1100°F, allowing it to be used on every part of the exhaust system!.
APPLICATIONS: Manifolds, Catalytic Converters, Mufflers, Tailpipes and more!.
EVERYTHING YOU NEED: The kit includes a pair of gloves and a .5" x 24" piece of aluminum tape!.
DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..

Check Stock

Permatex 82099 Spray Sealant, 12 oz.

J-B Weld Exhaustweld: A High Strength Fiberglass Wrap, Impregnated With A Specially Formulated Resin For High Temperature Resistant Repairs. Exhaustweld Can Resist Up To 1100°F Once It Is Fully Cured.
Cure And Set Time: Exhaustweld Can Cure With Or Without Heat! It Will Cure Within 20 Minutes If Heat Is Applied To It With Either A Heat Gun Or By Letting The Engine Run. Without Heat, Exhaustweld Will Set In 20 Minutes And Cure In 2 Hours.
High Heat Resistance: Once Fully Cured, J-B Weld Exhaustweld Exhaust System Repair Wrap Has A Temperature Resistance Of 1100°F, Allowing It To Be Used On Every Part Of The Exhaust System.
Applications: Manifolds, Catalytic Converters, Mufflers, Tailpipes And More.

Check Stock

Exhaust Turn Down Exhaust Tip 2.00' Diameter X 8.00' Long 1 7/8' Inlet Turn Down Chrome Plated WTD20008-175 Wesdon Exhaust Tip

1 7/8 Inch Inlet 2.00 Inch Dia 8.00 In Long Turn Down Weld On Exhaust Tip.
Weld On Style fits a Exhaust Pipe 1 7/8 Inlet.
2.00 Inch Diameter Pipe 8.00 Inches Long.
Turn Down Style Tip (Please measure to make sure it fits your Car or Truck) 1 7/8 ID Pipe.

Check Stock

Permatex - 80333 - Muffler & Tailpipe Putty 4 oz net wt 2 foil pouches

Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains....
The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It....
Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam....
Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes,....

Check Stock

Lisle 38350 Exhaust Hanger Removal Pliers

This tool separates the rubber supports from exhaust hanger brackets..
The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports..
The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier..
The tool works on all import and domestic car and truck exhaust systems that use the rubber hanger supports. The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier..

Check Stock

Permatex 80335 Muffler and Tailpipe Sealer, 3 oz. 3-Pack

Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains No Solvents Or Volatile Organic Compounds (Vocs)..
The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It Creates A Permanent Bond Stronger Than Steel..
Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam Connections Or Holes..
Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes, Gas And Commercial Furnaces And Water Heaters..

Check Stock

J-B Weld 37901 ExtremeHeat High Temperature Resistant Metallic Paste - 3 oz

Jb Weld Extreme Heat: Is Formulated For Repairs To Iron, Steel And Metal In High Temperature Environments 1000°F / 537°C. Non-Flammable, It Contains No Solvents Or Volatile Organic Compounds (Vocs)..
The Original Cold Weld: Jb Weld Was Developed As An Alternative To Torch Welding. Designed To Be Effective In Extreme Environments, Once It Sets, It Creates A Permanent Bond Stronger Than Steel..
Simple To Use: When Fully Cured, This Metallic Compound Can Be Drilled, Machined Or Sanded. It Is Great For Repairing Cracks, Small Gaps, Seam Connections Or Holes..
Versatile & Dependable: Ideal For Repair Work On : Exhaust Manifolds, Pipe Connections, Mufflers, Catalytic Converters, Outdoor Grills, Fire Boxes, Gas And Commercial Furnaces And Water Heaters..

Check Stock

Exhaust Tip 3.00" Inlet Dual 3.00 X 9.75 Long Round Double Wall Gloss Black 304 Stainless Steel WDWR300975-300-GBK-SS Wesdon Exhaust Tip

Exhaust Tip 3.00" Inlet Dual 3.00 X 9.75 Long Round Double Wall.
Weld On Style fits a 3.00 Exhaust Pipe 3.00 inlet.
304 Stainless Steel High Gloss Black Powder Coated.
This is made to fit a 3.00” exhaust pipe. Please measure your exhaust pipe to make sure you have a 3.00” exhaust pipe outlet and that you have the room for it to fit..

Check Stock

Upower 2 inch Inlet Exhaust Tip Burnt Muffler 3 inch Outlet, 2' to 3' 14.6' Length Exhaust Tip Universal For Car Truck

Dimension: 2 inch inlet, 3 inch outlet, Overall Length: 14.6 inch, Exhaust Muffler body width 4 inch.
2 in 1 Design: This is a 2 inch muffler resonator with blue burnt exhaust tip, design with thick wall straight cut and can be easily weld on the exhaust tip pipe..
High Quality Material: Upower exhaust tip built with mirror polished stainless steel & blue plating. Muffler is made by premium cotton helps absorbing sound and producing a low, deep tone, durable and Anti-corrosive, never Rusty.
Wide Application: Universal fits any 2.0" Outlet or 2.1" Inlet trucks car exhaust tail pipe..
Note: 1 Year Warranty, No instruction is included. Professional installation is highly recommended..

Check Stock

2 Bottles of New BG 44K Platinum

Increase power, performance, mileage and save gas: Cleans by not only the entire emissions and exhaust system, but the fuel system as well. Works with gasoline, ethanol and hybrid vehicles..
Save on expensive fuel system and emission control repairs: Regular use every 5,000 miles tunes-up the fuel, emissions and exhaust systems keeping them clean and preventing the CEL light from returning..
Will not void manufacturer’s new vehicle warranty: Specifically designed and safe to use on vehicles which have oxygen sensors and catalytic converters. Exceeds EPA compliance performance criteria..
Works on all fuel injected, direct injected, carbureted, turbo, GTDI, Ecotec and EcoBoost engines..
Clean fuel and exhaust systems reduce excess exhaust hydrocarbon, CO and NOX emissions and saves gas..

Check Stock

CURT 49090 2-Inch x 9-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.

Check Stock

CURT 49240 2-Inch x 24-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.

Check Stock

CURT 49120 2-Inch x 12-Inch Weld-On Raw Steel Trailer Hitch Receiver Tube

STANDARD FIT. This hitch receiver tube features industry-standard inside dimensions, able to accept virtually any 2-inch x 2-inch shank, including a trailer hitch ball mount, tow hook or other receiver hitch accessories.
HIGH-STRENGTH. This receiver tube is constructed from quality steel to offer dependable strength.
REINFORCED COLLAR. To maximize strength at the opening, this hitch tube receiver is fitted with a 1/2-inch reinforcement collar.
READY TO WELD. This weld-on hitch receiver comes with a raw steel finish to allow you to weld it into place right out of the package. It can be used for custom towing systems, workshop builds or other weld projects.
PRE-DRILLED. For convenience, this weld-on trailer hitch receiver tube comes with a pre-drilled hole to readily accept a trailer hitch pin.

Check Stock