Top Weld on Barrel Hinges Reviews

Heavy Duty Gate Hinges 7 Inches - 2 Pack Black Iron Door Hinge Barrel Style 900 Lbs Capacity for Swing Door Trailer Ramp Gate - Weld On Install

Heavy Duty Design: Hinge length is 7 inch, barrel diameter is 1.25 inch, back plate width is 1.25 inch. Made of durable thick cold roll steel, this heavy duty gate hinges can hold up to 900 lbs capacity..
Multi-functions - This gate hings perfect for heavy duty swing gate, trailer gate, barrel door, weld on install easily..
Corrosion-resistant Coated Finish: Matte black coating for gate hinges make it anti-rust and can work in outdoor and indoor condition..
The Grease nipple keep the internal ball bearings lubricated and extend the working life of the gate hinges..
100% Money-Back Guarantee: 90 days free replacement or refund and fast customer service..

Check Stock

3 inch Steel Bullet Hinge with Zerk Grease Fitting and Bushing - Weld on for BBQ Smoker Pit Lid Door Tailgate Gate or Fence

✅ 【3 INCH SIZE】3" weld on bullet hinge for BBQ Smoker pit doors and lids, truck tailgates, fences, gates, etc..
✅ 【INCLUDES】Steel with zerk fitting (grease fitting) - Includes Brass Bushing.
✅ 【PREMIUM QUALITY】Heavy duty housing and thick steel center pin.
✅ 【WELD ON】Use 2 or more barrel hinges per application..
✅ 【MULTIPLE USES】BBQ smokers, gates, automotive tailgates, etc..

Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
Minimum distance between post and gate should be 1.5.

Check Stock

J bolt gate Hinges Heavy Duty 5/8\ pivot hinge Adjustable Barrel Driveway Pair for welding

Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
Minimum distance between post and gate should be 1.5.

Check Stock

CTW (4) Trailer Ramp Door Hinges/Weld On / 1' x 10' / Grease Fitting / 9 ga. Steel

(4) 10 inch x 1 inch Raw Steel Weld On Trailer Ramp Door Hinges . Integrated Grease Fitting ..
Raised Center Portion With Steel Wrap . Center Shank Measures Approx. 3 3/4 inch ..
Heavy Duty Steel Hinges for Weld On Applications ..
Hinges are 10 inch Long with Raw Steel Finish . 7/16 inch Pin Diameter. 9 Gauge Steel ..
Commonly Used For Trailer Ramp Door Hinges ..

Check Stock

Heavy Duty Gate Hinge Pair 7 Inch Barrel Style Good Load Capacity - Weld On Install (7 Inch)

...L ( 2 pairs) x 1.4 inch H, 900 lbs capacity per pair, the thickness of the plates is 0.3”..
✅ MULTI- SOLUTION: suitable for many kinds of big and heavy gates: driveway gate, metal gate, trailer gate, swing gate, etc. It can prevent the gate from sagging and hold them more stable..
✅ FULL PACKAGE: include 1 male barrel, 1 female barrel, steel ball, and grease zerk fittings..
✅ EASY ASSEMBLY: good base to weld on. Before welding, you need to remove the paint covering hinges, however, after that, you can paint and this will keep these hinges from rusting and use for a long time. You will see a steel ball bearing and that is what the pinned side of the hinge rides on. There is a nipple that is for applying grease to keep things smooth..
✅ YOUR SATISFACTION is our priority: If you are not completely satisfied with your purchase, please let us know and we will refund your money, no questions asked. Please let me know if you need any additional information, we will find the best solution for your need..

Check Stock

D&D Technologies TCHDMA1 Multi-Adjust Heavy Duty Gate Hinges, for Self Closing Wood and Vinyl Gates up to 132 Pounds, 3-Way Adjustable, Gap up to 1 3/8", Black, 2 Count

900LB Capacity per hinge - Ball Bearing With Grease Zerk Fitting LISTING IS FOR 2X COMPLETE GATE HINGE SET.
The hinges are precision machined from high strength, solid cold roll steel bar. They are fitted with ball bearing for extra smooth easy operation..
Unlike ordinary hinges that will seize up fail to work due to age and weather conditions, these will always operate like new. Zerk fitting for adding grease makes for hinges that will last a very long!.
SPECIFICATIONS: -Weight capacity per hinge: 900 lbs -Hardened, heat treated cold rolled steel. -Precision Machined -Ball Bearing -Zerk fitting for greasing -Welding Tabs -J Bolt length is 7-1/4" -3/4" J-Bolt with Zinc Plated Nuts and Washers -Barrel is 4-5/8" by 1-9/16" -Powder coated.
Includes: -2x Heavy Duty Steel Hinge Set - 3/4" J-Bolt style with weld tabs - Ball bearing and zerk fitting for grease.

Check Stock

Weld-On Hinges 1Pair

Delivered in a thin layer of oil to protect from rust during shipping. This ensures you receive the product at its best state.

Check Stock

2 Pieces 3 Heavy Duty Weldable Hinges 12 Ga Welding Long Lasting Steel Butt Hinge Corrosion and Rust Resistant Metal Weld on Hinges for Trailer Door Heavy Gates

What You Will Get: you will receive 2 pieces of weldable hinges, the size of them is about 3 x 3 inches, and the thickness is about 12 Ga, the weight is about 0.34 lb, besides, each hinge can bear about 25 lb of weight, you can choose them according to your needs.
Strong and Reliable: this weldable metal hinge is made of steel, strong and reliable, and it is with nice bearing capacity, suitable for heavy gates and doors, it is not easy to break, you can use the hinge for a long time.
Easy to Install: these heavy duty gate hinges do not need to be fixed with screws or other fasteners, only need to be welded at the place you want.
These heavy duty gate hinges are dark gray and don't have coating, they can be painted to match the metal surface to which they are attached.
Using Method: you can weld the metal gate hinges directly to the door, or you can drill holes and screw them on the doors (screw is not included), you can choose the installation method according to your needs.
Applicable Occasion: you can take these weld on steel hinges for home door use, and they are also suitable for yard gate, trailer and other occasions, strong and safe to use.

Check Stock

Heavy Duty Guardian Gate Hinge Driveway Bolt on Gate & Post Prime Coated

Largest weld surface -- with Large BOLT ON Plates which makes easy to install and mount.
Grease zert for easy lubrication, size: 7 1/8 " High x 3" wide.
Maximum weight rating of 1000 lbs per pair of hinges.

Check Stock

Renovators Supply Manufacturing Black Door Gate Strap Hinges 10\ Long Wrought Iron Classic Heart Tip Design Powder Coated Kitchen Cabinet Door Gate Strap Hinges Including Mounting Hardware

MATERIAL - These Authentic Heart Tip Style Black Door Strap Hinges are crafted out of high quality wrought Iron material. The exclusive rust resistant powder coating imparts a luxurious black finish to these cabinet dresser strap hinges. These are suitable for different styles of cabinets, wardrobe, chest, Kitchen cupboards doors, gates and many more..
DIMENSIONS - Total Length= 10 Inches, Barrel height = 3.5 Inches, Screw Holes= 6. Mounting Screws are Included, But we recommended replacing with Separate Heavy Duty Screws..
FLUSH BARREL HINGES - 5 Barrel hinges are designed for strength, durability and smooth open mechanism. Its versatile Flush offset makes it go with almost all applications with flat flush surfaces. The package includes mounting hardware complementing the Classic vintage door and gate strap hinges..
CLASSIC DESIGN - It's fabulous and antique eye and heart tip style and textured pattern details give a modern sleek look with an Old Colonial charm to your home furniture..
BUY WITH CONFIDENCE - Our exclusive Powder Coat finish is designed to protect the item for many years to come. We provide a full year 100% Satisfaction guarantee with our Black wrought Iron Strap Door Hinges..

Check Stock

Waterson Heavy Duty Commercial Fully Adjustable Mortise Self-Closing Gate Hinges 2-Pack – K51MP-450 (SA.SA1)-Black

HIGH STRENGTH - The gate hinge is made of high quality steel so that each pair of the hinge can hold up to 400lbs driveways and security gates!.
RUST RESISTANT - The black powder coating makes the hinge has a superior rust resistance performance!.
EASY TO INSTALL - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall.Minimum distance between post and gate should be 1.5", to accommodate for the welding plate and barrel. The threaded arm allows you to easily adjust the distance between gate and post!.
LONG LIFE TIME - Hinge pivots on a steel ball bearing and includes a grease fitting to keep the bearing lubricated. It'll last a long life time in good maintenance!.
EXCELLENT SERVICE - Backed by a 12 month Warranty and 7*24 hours Technical Support!.

Check Stock

Bobco Metals 3\ Heavy Duty Weldable Hinges - Steel Butt Hinge Design for Heavy Gates & Doors - Long Lasting - Corrosion & Rust Resistant - 1 Pair

Bobco Metals 3" Heavy Duty Weldable Hinges are made of good quality steel that is durable, sturdy, and long-lasting use. It is easy to use, perfect for high-stress applications, such as holding up heavyweight gates, doors, and more..
These weldable hinge plates are 1/4" thick and weighs 0.25 lbs each. They are designed to connect the gate to the post, and typically are used where a hinge must be welded to another metal surface. Moreover, when a heavy duty drill bit is used, they can have holes drilled in them for screw mounting..
Weld-on hinges won’t have to use screws or other fasteners. Also, these hinges are suited for permanent applications than bolt-on hinges. They provide more strength and security and a good choice for your gates, trailers, door, or for tailgates. Thus, making the installation easier..
These steel hinges are uncoated, and are their natural dark grey. They can be painted to match the metal surface to which they are attached..
All hinges are packaged with care. Rest assured, your hinges will arrive in perfect condition and ready to use out of the box!.

Check Stock