WeldingCity 10-pcs TIG Welding Tungsten Electrode Tri-Element Non-Radioactive (Purple/AWS: EWG) 1/16
- For Accurate Calibration of Butt Fillet Type Welds.
- Determine the Leg Size of the Fillet Weld.
Top Weld Type Reviews
KUNWU Stainless Steel TIG Welding Rods ER309L 1/16" x 36" (5 Lb) Used to Weld Type 304 and Similar or Dissimilar Base Metals
- Occasionally used to weld Type 304 and similar base metals where severe corrosion conditions exist requiring higher alloy weld metal.
- Also used in dissimilar metal welds, welding of dissimilar steels or overlaying unalloyed structural steels.
- Low carbon content (0.03 percent maximum) increase weld metal resistance to intergranular corrosion.
- Easily use in welding of kitchen, food equipment, furnace, motorbike and exhaust system.
- Straight length of 36 inch packaged in a PVC tube (random color).
KUNWU Stainless Steel TIG Welding Rods ER309L 1/16" x 36" (2 Lb) Used to Weld Type 304 and Similar or Dissimilar Base Metals
- Occasionally used to weld Type 304 and similar base metals where severe corrosion conditions exist requiring higher alloy weld metal.
- Also used in dissimilar metal welds, welding of dissimilar steels or overlaying unalloyed structural steels.
- Low carbon content (0.03 percent maximum) increase weld metal resistance to intergranular corrosion.
- Easily use in welding of kitchen, food equipment, furnace, motorbike and exhaust system.
- Straight length of 36 inch packaged in a PVC tube (random color).
Single Tab Weld Nut with Target - Spot Weld Nuts 5/16-18 - Weld Nuts/Spot/Offset Hole - Low Carbon Plain Steel (10)
- 10 Pack 5/16-18 Spot Weld Nuts - Single Tab - With Target.
- This Tab Spot Weld Nut is a recessed electrode guide greatly facilitates welding to thin materials. It is ideal for use when a self-locating spot-weld nut is needed. This weld nut can be used in restricted areas such as corners, channels, and other confined areas..
- This Tab Spot Weld Nut is extremely versatile and will provide a robust spot weld connection in a wide range of applications and conditions. If your product or application has fastener space constraints, you should consider the use of this weld nut..
- This weld nut has a narrow body that is well suited for use in confined areas..
- The weld nut features a strong single button projection which gives a deeper, more penetrating weld than is ordinarily obtained from other types of projections..
Weld Stud 1/4-20 x 0.960 in PK100
- Price For: Each Meets/Exceeds: - Finish: Plain Thread Direction: Right Hand Material: Steel Item: Weld Stud Type: Bottom Projection Thread Size: 1/4-20 Thread Type: UNC Thread Length: 0.960" Length under Head: 1" Head Dia.: 0.563" Head Height: 0.078" Projection Width: 0.100" Projection Height: 0.040" Spade Length: - Spade Width: -.
- Spade Height: - Country of Origin (subject to change): United States.
Weld Stud, 1/4-20 x 1.210 in, PK100
- Price For: Each Meets/Exceeds: - Finish: Plain Thread Direction: Right Hand Material: Steel Item: Weld Stud Type: Bottom Projection Thread Size: 1/4-20 Thread Type: UNC Thread Length: 1.210" Length under Head: 1-1/4" Head Dia.: 0.563" Head Height: 0.078" Projection Width: 0.100" Projection Height: 0.040" Spade Length: - Spade Width: -.
- Spade Height: - Country of Origin (subject to change): United States.
J-B Weld Original Epoxy, Steel Reinforced Epoxy, High Strength - 2 Pack, Dark Grey (8265S-2)
- J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces. Perfect for DIY household, automotive, marine, craft repair and much more..
- CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
- VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
- SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
Poweka 13FT Butyl Rubber Sealant Tape for Car Auto Headlamps Window Door Windshield,4M Black Butyl Rope
- Butyl Sealant Main Application: Butyl rubber tape is suitable for the shock-absorbing paste of windshield, door waterproof film,decorative parts,car....
- Excellent Sealing：Our Butyl rubber sealant features excellent sealing adhesion,butyl tape can be sticky to any type of metal,....
- Easy To Use: Simply release the butyl sealant from paper and press it sufficiently around the pinch weld.And after removing headlamp cover, the weld....
- Black Butyl Tape: Rubber Sealant is a non-drying,non-hardening synthetic rubber based butyl rubber sealant. It will remain permanently sealing and....
- Butyl Windshield Sealant Size: Butyl sealant Diameter: 7-10 mm, Length: about 4 meters. It is long enough for re-sealing about 2 or 4 headlight....
J-B Weld 8265S Original Cold-Weld Steel Reinforced Epoxy - 2 oz.
- J-B WELD ORIGINAL: The Original Cold Weld two-part epoxy system that was designed as an alternative to torch welding. J-B Weld Original provides strong, lasting repairs to multiple surfaces and creates a bond stronger than steel. Perfect for DIY household, automotive, marine, craft repair and much more..
- CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 15-24 hours to cure. Once cured, J-B Weld Original can be tapped, filled, sanded, molded and drilled. J-B Weld Original’s set and cure color is dark grey..
- VERSATILE & DEPENDABLE: J-B Weld Original is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, J-B Weld Original is waterproof and resistant to petroleum, chemical and acid..
- SURFACE APPLICATIONS: Metal, Plastic & PVC, Wood, Concrete, Ceramic & Tile and Fiberglass..
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
- Will set in 4-6 hours, and cure in 16-24 hours.
- Waterproof, petroleum, chemical, and acid resistant when fully cured.
J-B Weld 8272 MarineWeld Marine Epoxy - 2 oz.
- J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and watercraft repairs..
- CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be tapped, filled, sanded, molded and drilled. J-B Weld MarineWeld’s set and cure color is dark grey..
- VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees Fahrenheit (287 degrees Celsius). When fully cured, MarineWeld is waterproof and resistant to petroleum, chemical and acid. It retains strength above & below water..
- SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld delivers superior performance, quality, and results for the World’s Strongest Bond..
106pcs Plastic Welding Rods ABS PP PU PE PA PC TPO 7 Types of Plastic Welder Rods for Car Bumper Kayak Repair Kit with Reinforcing Stainless Steel Mesh Plastic Welding Kit Welding Supplies
- PLASTIC WELDING KIT WITH RODS: 106 pieces 12-color plastic welding rods. Includes 7 of the most commonly used plastics-(PP)polypropylene, (PU)polyurethane, (PE)polyethylene, (PC)polycarbonate, (PA)polyamide/nylon, ABS, TPO. Round welding rods are available in 7pcs colors, 8pcs for each color. Flat welding rods are available in 5 colors, 10pcs of each color. The round welding rods are 13 inches long and 1/8 inch in diameter. Flat welding rods measure 9.8 x 0.2 x 0.1inch..
- MULTIPLE PLASTIC TYPES: ABS/PP/PU/PE/PA/PC/TPO Various types of plastic repair welding rods that can help you repair car bumpers, kayaks, lawn mowers, plastic Water tanks and more broken plastic parts. Each bundle of plastic welding rods has a corresponding plastic label, which allows you to choose the type of material you need. Please determine the type of plastic you are welding and select the corresponding material, which can better provide a seamless repair for your welding job..
- WELDING RODS GOOD PERFORMANCE: The plastic welding rod has good toughness and stable moisture-proof insulation, not easy to wear and aging, suitable for repairing damaged plastic parts made of plastic. Use with the plas....
Plast-aid Multipurpose Repair Plastic - 6 oz Kit
- J-B WELD MARINEWELD: A two-part epoxy cold weld system that provides strong, lasting repairs to multiple surfaces. Perfect for all DIY marine and....
- CURE AND SET TIME: After mixing the tubes at a 1:1 ratio, it takes 4-6 hours to set and 16-24 hours to cure. Once cured J-B Weld MarineWeld can be....
- VERSATILE AND DEPENDABLE: J-B Weld MarineWeld is steel reinforced, has a tensile strength of 5020 PSI and can withstand temperatures up to 550 degrees....
- SURFACE APPLICATIONS: Aluminum, Fiberglass, Metal, Plastic/Composite, Wood..
- DO IT YOURSELF: Big or small, you can DIY it with J-B Weld. Our heavy duty epoxy and adhesives repair & restore it right the first time. J-B Weld....
J-B Weld 8281 Professional Size Steel Reinforced Epoxy Twin Pack - 10 oz.
- JB WELD: Is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Perfect for household, automotive, marine and craft uses..
- THE ORIGINAL COLD WELD: JB Weld was developed as an alternative to torch welding. Designed to be effective in extreme environments, once it sets, it creates a permanent bond stronger than steel..
- EASY TO USE: Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color..
- VERSATILE & DEPENDABLE: J-B Weld has a tensile strength of 3960 PSI & sets overnight. It can withstand temperatures up to 550ºF when cured. Great for use on brick, concrete, metal, fiberglass & more..
- DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World’s Strongest Bond..