Top Wayne Utility Pump Reviews

BURCAM 300507S 1/4 HP Automatic Submersible Utility Pump, Black

  • 1/4 HP AUTOMATIC UTILITY PUMP: Automatic ON and OFF submersible utility pump is designed for use in residential applications for water transfers. Ideal for draining basements, spas, pools, flat roofs, and window wells..
  • AUTOMATIC UTILITY PUMP: The electronic switch monitors the water levels while pumping so that you can simultaneously do other things. The automatic switch activates the pump at approximately 1-3/4 inches of water and continues to power the pump for approximately 1 minute after reaching its shut off level to allow the pump to drain down to 1/8 of an inch..
  • UTILITY PUMP CONSTRUCTION: Thermoplastic body is corrosion-resistant. The pump discharge is garden hose compatible for easy hook up and includes a barb adapter for ¾” flexible pipe..
  • PERFORMANCE: The maximum head is 15 feet and the capacity is up to 1200 gallons per hour..
Check Stock

Wayne 58321-WYN3 CDU980E 3/4 HP Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch, Large, Silver

  • INDOOR USE ONLY - This 3/4 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU980E can pump up to 5,490 GPH to keep your basement dry..
  • TOUGH AND DURABLE - Corrosion-resistant stainless steel motor housing and fasteners come with a cast-iron volute that provides long life in tough sump pump applications..
  • EFFICIENT DESIGN - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole!.
  • ADDITIONAL FEATURES - 1-1/2” NPT discharge for compliance with building codes. The vertical float switch has been tested to 1 million cycles for long-lasting use..
  • QUALITY YOU DESERVE - Proudly assembled in the USA for quality you can trust. Warrantied for 5 years for dependable, efficient, & ultra-quiet performance..
Check Stock

Wayne ESP25 Upgraded 12-Volt Battery Backup System, Black

  • Upgraded ESP25 with epoxy steel body and cast-iron base. No more plastic.
  • 2900 GPH at 0′ provides additional protection to your primary Wayne sump pump.
  • Assembled in USA, performance that lasts for years.
  • Audible alarm sounds, notifying you when the back up system is active.
  • Easy to read LED display shows back up system readiness.
  • Requires a 75 amp hour battery, recommended for use with the Wayne Wsb1275 75 amp hour battery.
Check Stock

WAYNE - 1 HP Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch - 6,100 Gallons Per Hour - Heavy Duty Basement Sump Pump

  • INDOOR USE ONLY - This 1 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU1000 can pump up to 6,100 GPH to keep your basement dry..
  • TOUGH AND DURABLE - Corrosion-resistant stainless steel motor housing and fasteners come with a cast-iron volute that provides long life in tough sump pump applications.
  • EFFICIENT DESIGN - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole.
  • ADDITIONAL FEATURES - 1-1/2” NPT discharge for compliance with building codes. The vertical float switch has been tested to 1 million cycles for long-lasting use.
  • QUALITY YOU DESERVE - Proudly assembled in the USA for quality you can trust. Warrantied for 5 years for dependable, efficient, & ultra-quiet performance.
  • Assembled in the US with foreign and domestic parts..
Check Stock

WAYNE CWS100 - 1 HP Cast Iron Convertible Jet Well Pump - Up to 588 Gallons Per Hour - Heavy Duty Jet Well Pump, Black

  • High-Capacity Well Pump - This 1 HP WAYNE jet well pump is perfect to move water quickly and efficiently from your well to your home. WAYNE model CWS100 is ideal for wells from 25-90 ft. deep..
  • Tough And Durable - Durable cast iron volute with dedicated priming port for volute filling. Jet assembly is required and sold separately..
  • Customizable Settings - Dual voltage (120V/240V) high efficiency square flange motor, with the default factory setting at 120V. Pressure switch is pre-set at 30-50 PSI for automatic operation..
  • Additional Features - 1” NPT discharge with 1-1/4” NPT suction and 1” drive..
  • Quality You Deserve - Proudly assembled in the USA for quality you can trust. Warrantied for 3 years for dependable, efficient performance..
Check Stock

WAYNE VIP50 - 1/2 HP Reinforced Thermoplastic Submersible Multi-Use Pump - Up to 2,500 Gallons Per Hour - Heavy Duty Multi-Use Pump

  • Heavy-Duty Removal - This 1/2 HP WAYNE multi-use pump is perfect to keep your area dry during heavy water flow. WAYNE model VIP50 can easily pump water away along with debris up to 1/2"..
  • Tough And Durable - Corrosion-resistant and sealed thermoplastic construction is fully submersible and provides long life in tough outdoor and indoor applications..
  • Efficient Design - Easy to prep and run with a minimum of 2-5/8” of water to prime. 1-1/4” discharge with a 3/4" garden hose adapter..
  • Usage - Able to handle flat areas like flooded basements, boats, and low-lying outdoor collection spots..
  • Quality You Deserve - Proudly assembled in the USA for quality you can trust. Warrantied for 1 year for dependable, efficient performance..
Check Stock

Acquaer 1/3 HP Submersible Water Pump 2160GPH Sump Pump Thermoplastic Utility Pump Portable Electric Water Pump Water Remove for Basement Hot Tubs Garden Pool Cover Draining with 10 ft Cord

  • 【EXCELLENT DRAINING PERFORMANCE】High-efficiency submersible utility pump with 1/3 HP power motor. Draning water up to 2160 Gallons Per Hour( 36 gallons per minute) at 5ft. Lifts water up to 33.5 ft of vertical height. Drain Pump with 10ft power cord and pure copper wire motor, energy efficient and high productive, perform well in drainage..
  • 【REINFORCEMENT MATERIALS】 Submersible pump is made of thermoplastic material, which reinforced its durability and corrosion resistance. Unique ergonomic handle and apperance design for easy portablity. Compact size and lightweight for easy storage. Utility pump runs quiet and stable, fits for household and outdoor occasions..
  • 【WIDE APPLICABILITY】Submersible pump can be operated easily by plugging into the power supply. Suitable for draining water from swimming pool covers, basements, pits, ponds, window wells, rain barrels or other flooded areas. Utility pump is also perfect for irragating, garden watering, car washing and other home requirement..
  • 【DETACHABLE SCREEN & ADAPTER】Submersible utility pump with detachable bottom screen design, filters debris, protect water pump from damage and remove water down to 1/4 in of surface. The drain pump comes with 3/4" garden hose adapter. 1-1/4" NPT discharge fo....
Check Stock

Acquaer Submersible Water Pump 1/6 HP Sump Pump Thermoplastic Utility Pump Small Electric Water Pump 1750GPH Water Remove for Basement Hot Tubs Garden Pool Cover Draining with 10 ft Cord

  • 【EXCELLENT DRAINING PERFORMANCE】: High-efficiency submersible utility pump with 1/6 HP power motor. Draning water up to 1760 Gallons Per Hour( 29.3 gallons per minute) at 5ft. Lifts water up to 29.5 ft of vertical height. Utility pump with 10ft power cord and pure copper wire motor, energy efficient and high productive, perform well in drainage..
  • 【REINFORCEMENT MATERIALS】: Submersible pump is made of thermoplastic material, which reinforced its durability and corrosion resistance. Unique ergonomic handle and apperance design for easy portablity. Compact size and lightweight for easy storage. Drain Pump runs quiet and stable, fits for household and outdoor occasions..
  • 【WIDE APPLICABILITY】: Submersible pump can be operated easily by plugging into the power supply. Suitable for draining water from swimming pool covers, basements, pits, ponds, window wells, rain barrels or other flooded areas. Utility pump is also perfect for irragating, garden cleaning, car washing and other home requirement..
  • 【DETACHABLE SCREEN & ADAPTER】: Submersible utility pump with detachable bottom screen design, filters debris, protect water pump from damage and remove water down to 1/4 in of surface. The drain pump comes with 3/4" garden hose adapter. 1-1/4" NPT....
Check Stock

WAYNE CDU790 - 1/3 HP Submersible Cast Iron and Stainless Steel Sump Pump with Integrated Vertical Float Switch - Up to 4,600 Gallons Per Hour - Heavy Duty Basement Sump Pump , Black

  • Indoor Use Only - This 1/3 HP WAYNE basement sump pump is perfect to keep your basement dry during heavy water flow. Whether it’s rain, snow melting, etc. WAYNE model CDU790 can pump up to 4,600 GPH to keep your basement dry..
  • Tough And Durable - Corrosion-resistant epoxy coated steel motor housing and stainless steel fasteners come with a cast-iron volute that provides long life in tough sump pump applications..
  • Efficient Design - The top suction design eliminates air lock and minimizes clogging from any debris in the bottom of the sump pit. Easy to install in about 15 minutes with no need to drill a weep hole!.
  • Additional Features - 1-1/2” NPT discharge for compliance with building codes. The vertical float switch has been tested to 1 million cycles for long-lasting use, up to 10 time more than our competitors..
  • Quality You Deserve - Proudly assembled in the USA for quality you can trust. Warrantied for 3 years for dependable, efficient, & ultra-quiet performance..
Check Stock

Wayne EEAUP250 1/4 HP Reinforced Thermoplastic Submersible Multi-Use Pump, 1, Black

  • Hands-Free Water Removal: WAYNE model EEAUP250 has iSwitch technology, which activates the pump once the water level is above 1-3/4 inch and automatically turns off when the water drops to below 1/2 inch.
  • Automatic Pumping: Water level must be at least 1-3/4 inch for the pump to turn on, prime, and operate.
  • water levels less than 1-3/4 inch won’t activate the iSwitch to start the pump, so manual activation will be needed.
  • Efficient Design: Reinforced and sealed submersible design.
  • once activated, the pump removes water down to 1/2” on the surface.
  • Additional Features: Able to handle flat areas like basements, driveways, etc. as well as tight spaces such as window wells and fish tanks.
  • Quality You Deserve: Proudly assembled in the USA for quality you can trust.
  • since the iSwitch turns off the pump when the water is below 1/2 inch there is no need to unplug it.
Check Stock

Pump Sentry 1622PS - Emergency Power for Sump Pumps by Sec America (1622PS+27-Snap-Top-Box) Instant Automatic Power Transfer | Advanced and Reliable Sump Pump Battery Backup Systems

  • 1622PS Pump Sentry is among the most advanced and reliable sump pump emergency battery backup systems available..
  • It interfaces between a pump and its AC wall outlet. When AC utility power is present, the 1622PS charges a battery and channels power from the wall outlet to the pump while monitoring that wall outlet for a power outage..
  • At the moment utility power fails, the 1622PS substitutes its own generated AC power necessary for pump operation by converting energy from the battery. When utility power is restored, the 1622PS automatically switches the pump back to the AC wall outlet’s power..
  • To determine compatibility with pump: User should verify that steady-state pump current does not exceed 14A, Agency Approvals: UL STDS. 1778, 1012, & 60950-1 CAN/CSA STDS..
  • For Wall Mount or Surface Mount Installation, 2 year Factory Warranty. Made and serviced in the USA.
Check Stock

Wayne 66059-WYN3 Utility Pump PC1 / PC2 Impeller Kit

Check Stock

Jabsco Flexible Impeller Ac Motor Pump Units - Type: Service Kits - Type: for Model 6050-00

  • Replacement switch fits Little Giant CVCMA-20ULST & VCMA Series, PartsConnect PCP115, Wayne Reliant 189246, Beckett CB series, Liberty Pumps LCU series, Diversitech CP seriies, Sid Harvey 397-112, and other condensate pumps.
  • Replace Zing Ear G606 or Crouzet 83133169 switch.
  • Includes instructions, help, and hints on how to replace your pump switch. Warranty: 3 years replacement..
  • Single Pole, on/off latching switch. Push the lever down with half an ounce of force, and it turns on. Up for off. Latching microswitch with just the right amount of overshoot (hysteresis) for the float in your condensate pump.
  • Please don't be stupid: TURN OFF ALL ELECTRICITY AND DISCONNECT ALL POWER BEFORE YOU FOOL WITH YOUR CONDENSATE PUMP!.
Check Stock