Top Water tight Fittings Reviews

Shurflo 2088 Elbow Fitting - Elbow 1/2\ NPT-F Swivel Nut X 1/2\ Hose Barb, Nylon, (Pack of 2), P/N 244-3926-2

【0% Metaloxide】: PEX A expansion elbow made by premium PPSU materials without metal, provide lead-free potable water, healthy for human and environment..
【PPSU Materials】: Light and durable, chemical stability. Well performance in corrosion resistant, heat and water resistance, RO (reverse osmosis), chlorinated and other types of water. Meet cUPC, NSF, F1960 standard..
【160 PSI, 200°F】: Expansion elbow fittings tightly connect with pex-a tube under high temperature/pressure. Applied to Building services pipework systems, Plumbing and heating (or cooling) systems, Potable water service line etc..
【Stopping Shoulders】: To indicate PEX A pipe fully insert in expansion fittings, leak-free. Cold connection, use with expander and expansion rings, no require for glue or sealing tape..
【Package】: 1/2" Expansion 90 Elbow Fittings 10PCS 1/2.

Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank | UM-3000

30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA i....

Check Stock

TAISHER 2PCS Black PVC 1-1/2 Bulkhead Tank Connector Adapter Fitting with Gasket for Water Tank Rain barrels Aquariums Bathtubs and Sink

Product Type: Bulkhead Water Tank Connector, suitable for installation in water tanks, water towers, buckets, fish tanks, etc..
Product material: Made of PVC, strength, durable, will not fade, fall off and crack，These fittings are not allowed be installed for potable water use.
Sealing: Threaded connection and embedded gasket form a tight seal, not easy to slip and leak..
Easy to install: Can be installed in walls, tanks or panels. The bulkhead design makes it easy for accessories to pass through the holes..
[Please note] When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

Check Stock

Class A Customs | T-10000 | One (1) RV Fresh Water 100 Gallon Tank, Grey Water | Ribbed for Extra Support

100 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 50” Longest Length (not including fittings) x 18” x 26” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (SIX) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in ....

Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....

Check Stock

SKYFOOST 4 Pcs PVC Bulkhead Fitting, 3/4 Inch Male 1/2 Inch Female Water Tank Connector with Plugs, Bulkhead Tank Fitting with 2 Rubber Ring Stablizing for Rain Barrels, Aquariums, Water Tanks (4)

...ead fitting 3/4 inch is a must-have tool for breezy, rustic Irrigation work. This professional bulkhead fitting is robust, durable, and It even comes with a plug to help you seal the water tank. Each bulkhead fitting barbed quality PVC material, which is colorfast and durable, and lasts longer than ordinary plastic fittings, and comes with two thick silicone gaskets for better sealing performance..
EASY INSTALLATION WATER TANK FITTINGS: Get outstanding results with our PVC bulkhead fittings. Each PVC bulkhead fittings tool takes the hassle out of the rain barrels, water tanks installation, and renovation. First, you need to drill a 25-26mm hole for installation and then assemble the Water Tank Connector and plug connector, cover the plug to prevent dirt and dust from entering the water tank, and keep it clean..
SUITABLE FOR CORNER OF YOUR GARDEN: We trust in a product that will not only get the job done but also do the job best. This PVC bulkhead fitting 3/4 inch is the perfect tool for sealing rain barrels. The bulkhead tank fitting can install in water tanks, storage buckets, and rain barrels, suitable for household, commercial and industrial use. It will bring co....

Check Stock

Class A Customs | RV Fresh and Gray Water Tank | Combo Pack 55 Gallon & 75 Gallon | RV Water Holding Tanks

Combo Pack of (One) 55 Gallon and (One) 75 Gallon Capacity Fresh or Gray Water Holding Tank Manufactured by Class A Customs - BPA FREE - NSF Approved....
55 GALLON WATER TANK MEASUREMENTS: 37.5” Longest Length (not including fittings) x 17.5” x 19.5” 75 GALLON WATER TANK MEASUREMENTS: 50.5”....
EACH TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5"....
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank,....
Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing....

Check Stock

Class A Customs | RV Fresh and Gray Water Tank | Combo Pack 65 Gallon & 75 Gallon | RV Water Holding Tanks

Combo Pack of (One) 65 Gallon and (One) 75 Gallon Capacity Fresh or Gray Water Holding Tank Manufactured by Class A Customs - BPA FREE - NSF Approved....
65 GALLON WATER TANK MEASUREMENTS: 44.5” Longest Length (not including fittings) x 17.5” x 19.5” 75 GALLON WATER TANK MEASUREMENTS: 50.5”....
EACH TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5"....
NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank,....
Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing....

Check Stock

Joywayus Brass Hose Fitting,90 Degree Elbow,3/8\ Barb x 3/8\ NPT Male Pipe Water/Fuel/Air (Pack of 2)

【Solid Brass】The hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
【Package Include】3PCS 5/8"x5/8"x5/8" Brass 90°Included Angle Y Hose Barb Fittings..
【Heavy & Thick】Heavy Y shaped brass barbs and thickened wall, higher strength and very rugged..
【Solid Connection】The Y shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm)..
【Note】Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage..

Check Stock

iMopo 70 Pack Drip Irrigation Universal 1/4 Barbed End Plug Fittings Barbed Connectors for Drip or Sprinkler System

【Great Value】：Comes with 70 pieces barbed end plug fittings in total,enough to meet your daily use..
【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
【BARBED DESIGN】：Barbed end plug fittings tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
【EASY TO INSTALL】:Barbed end plug fitting is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
【FOR WIDE APPLICATIONS】:Barbed end plug fittings are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..

Check Stock

Spears 1435 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 2" Barbed x NPT Female

Adapter for connecting pipes or fittings of different types.
Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other.
PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons.
Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately).
Meets ASTM D 2609 standards for plastic insert fittings and certified by NSF for use with potable water.

Check Stock

Redneck Convent Dual Water Feed Boat Motor Flusher Rectangular Cup Muffs with Hose Fittings Flush Kit – Marine Outboard Engine Flushing

ULTIMATE DUAL FEED FLUSHER: Use the Redneck Convent Dual Water Feed Boat Motor Flusher Rectangular Cup Muffs with Hose Fittings Flush Kit – Marine Outboard Engine Flushing to obliterate salt and mineral build up along with other contaminants from your outboard boat engine’s lower unit cooling system when hooked up to a garden hose.
Effective way to flush engine with fresh water to prevent clogging and corrosion and allow for engine adjustments.
EASY INSTALLATION: Requires no tools for installation or removal.
Simply slide the flusher muff cups over the top of the water intake slots on your boat and connect your garden hose to one of the included quick connect fittings to run motor out of the water or use to winterize motor.
Never turn water supply to full force or damage to drive may occur.
FITS YOUR BOAT: Compatible with most Johnson/Evinrude, Mercury, Yamaha, Chrysler, Force, Honda, Nissan, Suzuki, and Tohatsu outdrives.
As long as your boat includes side water inlet ports, this flusher is for you.
Rotate muff ears to fit and seal over the water pick-ups on the lower unit (cups swivel to be positioned horizontally or vertically for a multitude of ways to put it on).
NO LEAKAGE: Inferior round cups do not always fit correctly over intake ports, but....

Check Stock

LUTER Garden Hose Washers, O-Ring Rubber Washers Seals Self Locking Tabs, Pack of 30

PACKAGE: Pack of 30 black garden hose washers with 4 small outer tabs, good replacement parts for garden hoses. Enough quantity to repair and replace..
SIZE: Each is a regular specification. 1" (25mm) outer diameter, 5/8”(16mm) inner diameter, 1/8” (3mm) in thickness, fit for all standard 3/4" garden hose fittings..
MATERIAL: Made from heavy duty rubber, durable and tight, leak-free and stopped spraying. Not fall out when undoing the garden hose..
EASY TO ASSEMBLE: Disconnect water controller, then twist the faucet and replace the original one. Easy to replace and fix a leaky water tap connection.These washers seals are all function perfectly..
APPLICATIONS: The o-ring seals fit great on the rainwand, the hose-reel and the pistol-grip. Also suitable for all kinds of watering accessories such as garden hose fittings, water faucet, spray nozzle, hose splitter, other garden connectors, etc..

Check Stock