Top Water Temperature Sender Reviews

Equus E7500 5-Piece Gauge Kit

  • Set includes speedometer, water temperature gauge, oil pressure gauge, electric fuel level gauge, and voltmeter.
  • Kit includes mating fuel level sender (0E/90F), bulb and socket assemblies, installation adapters, mounting hardware, and detailed instructions for....
  • Bright backlit display enhances nighttime viewing.
  • Speedometer features a traditional rolling drum odometer and a resettable trip meter.
  • Speedometer accepts a 5/8" x 18 thread speedometer cable and is calibrated for 60 MPH at 1,000 cable RPM.
Check Stock

AODITECK 240-33 ohms 7'(180mm) Fuel Sending Unit Marine for Boat Car Fuel Tank Sender Fuel Water Level Sensor Marine Gas Water Tank Sensor Fuel Gauge Sending Unit Truck Marine Gas Water Tank Sender

  • Direct replacement for swingarm sender, wema sender. The advantage of doughnut float design type level sender over thick-film swim arm type level sender is the reed switch's durability and reliability. Additionally, no moving parts to break. No adjustment needed for tank..
  • "Easy to install, easy hookup!" The Fuel sending unit comes with gasket,mounting screws,well-written and illustrated instructions.
  • The wiring instructions are straight forward and easy to follow. Takes about 15 minutes to install total, getting the fuel gage working again..
  • SAE 5 hole mounting pattern, heavy duty 316 stainless steel and rugged construction. Signal Output: 240 ohms-33 ohms. Wide Application: It Could Support Fuel Level Gauge and Water Level Gauge for Boat/Auto..
  • Warranty Period: 1 year. We have local support in the USA,so we will generally not be asking customer to return parts to China if they have an issue. If you have special requirements, please contact us and we can customize for you..
  • Note: to allow the sender not hit the bottom of the tank, the length of sender should be 1" less than the depth of the tank if tank is plastic, and 0.5" less than the depth of the tank if tank is metal ..
Check Stock

K-Swap Coolant Temperature Sender Sensor Adapter K20 K24 Engine Swap Fit for Honda Civic with Fittings Adaptor 3/8-1/8NPT

  • FUNCTION: To make sure that your cluster still keeps you informed of the Temperature of your engine you need to install this Adapter..
  • APPLICATION: This K-Swap Coolant Temperature sender Sensor Adapter Fit for Any k-swap engine k20 k24，Acura integra，Honda civic，Honda Crv，Accord，Crx，MR2..
  • FEATURES: This adapter replaces the OEM idle air assist vale (not used on K-Swaps) leaving you with the perfect spot to thread your sensor into..
  • PACKAGE INCLUDE: 1x Fitting Adaptor，1x Universal Coolant Temp Sender Sensor..
  • FREE RETURN AND WARRANTY: We accept free return and replacement if it is not the correct one. And Guarantee with One Year Limited Warranty..
Check Stock

ARTILAURA 6 Gauge Set-GPS Speedometer, Tachometer, Fuel Gauge, Water Temperature Gauge, Oil Pressure Gauge, Voltage 7 Color Backlight for Car AUTO Boat Marine

  • 6 Gauge Kit- Includes GPS Speedometer, Tachometer, Fuel Gauge, Water Temperature, Volt and Oil Pressure Gauge. 7 color backlight : red、green、blue、yellow、olivine、orange、purple..
  • [ GPS Speedometer Gauge Set ]: GPS Speedometer gauge indicating Range: 0 - 80 MPH, Tachometer indicating Range: 0 - 8000 RPM, Volt gauge indicating Range: 8 - 16V, Fuel Level gauge indicating Range: E - F & Resistance 240-33 ohms, Water Temperature gauge indicating Range: 30 - 250°F (0 - 120°C), Oil Pressure gauge indicating Range: 0 - 150 PSI (0 -10 BAR)..
  • GPS Speedometer and Tachometer: Standard 85mm (3 3/8") hole in the panel (II) and allow a clearance of 55mm (2 3/16") behind the panel to fit the gauge. The Fuel Gauge, Water Temperature, Volt and Oil Pressure Gauge diameter is 2-1/16 inch (52mm)..
  • 【Material】The boat gauge are made of 316L Metal, Rubber and Plastic. Scratch resistant curved glass lenses. IP67 waterproof and dustproof grade..
  • ⭐⭐⭐⭐⭐[Attention]: Package Includes GPS Antenna, Tachometer Sensor(M16*1.5), Water Temp Sensor (1/8 NPT), Oil Pressure Sensor....
Check Stock

ARTILAURA 6 Gauge Set-GPS Speedometer 120MPH, Tachometer, Fuel Gauge, Water Temperature Gauge, Oil Pressure Gauge, Voltage 7 Color Backlight for Car AUTO Boat Marine(White)

  • 6 Gauge Kit- Includes GPS Speedometer, Tachometer, Fuel Gauge, Water Temperature, Volt and Oil Pressure Gauge. 7 color backlight : red、green、blue、yellow、olivine、orange、purple..
  • [ GPS Speedometer Gauge Set ]: GPS Speedometer gauge indicating Range: 0 - 120 MPH, Tachometer indicating Range: 0 - 6000 RPM, Volt gauge indicating Range: 8 - 16V, Fuel Level gauge indicating Range: E - F & Resistance 240-33 ohms, Water Temperature gauge indicating Range: 30 - 250°F (0 - 120°C), Oil Pressure gauge indicating Range: 0 - 150 PSI (0 -10 BAR)..
  • GPS Speedometer and Tachometer: Standard 85mm (3 3/8") hole in the panel (II) and allow a clearance of 55mm (2 3/16") behind the panel to fit the gauge. The Fuel Gauge, Water Temperature, Volt and Oil Pressure Gauge diameter is 2-1/16 inch (52mm)..
  • 【Material】The boat gauge are made of 316L Metal, Rubber and Plastic. Scratch resistant curved glass lenses. IP67 waterproof and dustproof grade..
  • ⭐⭐⭐⭐⭐[Attention]: Package Includes GPS Antenna, Tachometer Sensor(M16*1.5), Water Temp Sensor (1/8 NPT), Oil Pressure Senso....
Check Stock

MOTOR METER RACING Electrical 6 Gauge Set - 3-3/8\ 85mm Electrical Speedometer & Tachometer - 2-1/16\ 52mm Voltage, Fuel Level, Water Temperature & Oil Pressure - Black Dial - White Needle

  • MOTOR METER RACING Classic Series 6 Gauge Kit is Designed for Vintage Style, Features the 6 Most Essential Gauges for Any Car or Truck's Instrument Cluster - Includes Speedometer & Tachometer - Voltage, Fuel Level, Water Temperature, Oil Pressure.
  • Fits any 1 to 9 Cylinder Gas Powered Engine & 12-Volt Negative Ground Vehicle. Works with ECU Signal - Black Dial - 316 Stainless Bezel - White Light bulb Illumination - Convex Lens & White Needle.
  • Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI.
  • Package Includes 2' Speedometer Power Harness, 2' Tachometer Power Harness, Water Temp Sensor (1/8 NPT), Oil Pressure Sensor (1/8 NPT), Fuel Level Sender, U-bracket kit & Installation Instructions.
  • One-year Limited Warranty & Free Lifetime Technical Support.
Check Stock

MOTOR METER RACING 6 Gauge Set Classic with GPS Electrical Speedometer Digital Odometer Black Dial

  • Speedometer & Tachometer: Standard 3-3/8"(85mm) sized back. For any 1 to 9 cylinder gas powered engine & 12-volt negative ground systems. Volt gauge, Oil pressure gauge, Water temp gauge, Fuel gauge: Standard 2"(52mm) sized back..
  • FEATURES: In-dash design, Light bulb illumination, Convex lens, Stainless bezel, Plastic housing. Cylinders switch on the gauge back..
  • Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI..
  • INCLUDES: GPS Sensor & Converter, Water temp sensor (Thread size: 1/8 NPT), Oil pressure sensor (Thread size: 1/8 NPT), Fuel level sender, Power harness, U-bracket kit, Tachometer Filter x 2, Installation Instructions..
  • One-year warranty for non-human factor damage and free lifetime technical support..
Check Stock

100TECH Fuel Sending Unit 240-33 ohms 11'(280mm） Marine for Boat Vehicle Truck RV Fuel Tank Sending Unit Fuel Water Level Sending Unit Fuel Gas Sender Fuel Water Level Sensor Fuel Gauge Sending Unit

  • 100TECH Stainless Steel Fule Tank Sending Unit is Made With OKI Reed Switch(Imported from Japan). It is the Direct Replacement for Arm Type sender. The Advantage of This Fuel Level Sender Over Thick-Film Swim Arm Type Level Sender is the Reed Switch's Durability and Reliability. Additionally, No Moving Parts to Break. No Adjustment Needed for Tank..
  • The Fule/Water Level Sensor with American standard output 240-33 ohms (240 ohms at empty, 33 ohms at full). If you Need Lengths Other than 4"-24", Please Contact us Directly for More Information..
  • [Easy to Install] The Fuel Level Sending Unit Comes with Gasket,Mounting Screws,Well-Written and Illustrated instructions.
  • The Wiring Instructions are Straight Forward and Easy to follow..
  • SAE 5 hole Mounting Pattern, Heavy Duty 316 Stainless Steel and Rugged Construction. Wide Application: It Could Support Fuel Level Gauge and Water Level Gauge for Boat/Auto..
  • [The Size of Float] The Diameter of Float is 1.38"(35mm). If You Have to Drill the hole, Diameter 1.50"(38mm) Hole Would be Perfect..
Check Stock

1/4 NPT Plug Pipe Plug Fitting Countersunk Thread Internal Hex Head Style Male Plug (1/4 inch Brass Plug, Pack of 5)

  • SIZE -- Brass 1/4 inch NPT pipe fitting plug, pack of 5..
  • ACID-RESISTANCE & ANTI-CORROSION MATERIAL-- Internal Hex Thread Male Plug is made of high quality brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.achinery, fittings or pipes to prevent leakage of air, steam, gases, water, oil and fluids under pressure. These plugs are also great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc..
  • APPLICATIONS -- Designed to create a tighter seal for masking threaded holes and is commonly used to seal holes in machinery, fittings or pipes to prevent leakage of air, steam, gases, water, oil and fluids under pressure. These pipe plugs are also great for blocking off intake manifold water ports, water pump ports, water temp and oil sender holes, engine block holes, etc..
  • HIGH STRENGTH AND HARDNESS -- NPT Male Pipe is high strength and hardness ，make it last longer. Reduces the trouble of leaking and leaking during your use..
  • CUSTOMER SERVICE -- Professional factories produce quality threaded pipe. Every detail reflects a strong texture performance. Fast Delivery, we guarantee the quality before the item ships. 30 Days Free Refund..
Check Stock

LEFOO T2000 0-200PSI with 1 Meter Cable Fuel Pressure Transducer Sender Sensor 316 Stainless Steel Oil Pressure Transmitter 1/8\ NPT Thread Pressure Transducer for Oil Fuel Air Water Diesel Gas

  • 100% new pressure transducer /pressure Sender/ Pressure Transmitter, Our material is using top of line 316 stainless steel (not 304)and high temperature auto-graded plastic.It's an advance pressure transducer than traditional mechanical pressure transducer，anti-interference, high stability..
  • Model: T2000 Packard. Pressure Range:0~200psi. Electrical connection:Packard with 1 meter cable.Overload Pressure:1.5 times of full scales. Burst Pressure:3 times of full scales..
  • Accuracy:±1%F.S. Output:0.5-4.5V. Power Supply:10-30VDC. Pressure Connection: 1/8 NPT male Connection.Working Temperature:-40 ~ 100°C.Response Time:10ms..
  • Medium:Gas,Water,Oil, diesel,air. Works for oil, fuel, diesel, gas, water, air pressure, can be used in oil tank, gas tank, diesel tank etc.
  • We have a strong customer service team, welcome to contact us if you have any question.
Check Stock

Zerodis CO2 Refilling Adapter, Adjustable CO2 Cylinder Refill Adapter Valve CO2 Tanks Bottle Connector Accessories 3000psi Pressure Gauge

  • Works for oil,fuel,diesel,gas,water,air pressure. Can be used in oil tank,gas tank,diesel tank etc..
  • It's an advance pressure sender than traditional mechanical pressure sender.
  • CMC for Pressure and Pull Pressure Sensor..
  • Input 5V DC,Output: 0.5V – 4.5V linear voltage output.
  • Package Include: 1 X Pressure Transducer.
Check Stock

FASTROHY 0.5-4.5V 60 Psi Universal Pressure Transducer Sender/Sensor Solenoid for Oil Fuel Diesel Gas Air Water,Gauge Pressure 1/8\NPT Thread Stainless Steel

  • Works for oil,fuel,diesel,gas,water,air pressure.
  • Can be used in oil tank,gas tank,diesel tank etc.
  • It's an advance pressure sender than traditional mechanical pressure sender.
  • CMC for Load Cell Sensor. CMC for Pressure and Pull Pressure Sensor..
  • Package Includes: 1PC x Pressure transducer (With cable).
Check Stock

AUTEX Pressure Transducer Sensor 100 Psi Pressure Sender 316 Stainless Steel Oil Pressure Transmitter 1/8" -27 NPT For Oil Fuel Air Water Pressure

  • 100% new pressure transducer /pressure Sender/ Pressure Transmitter, Our material is using top of line 316 stainless steel (not 304)and high temperature auto-graded plastic..
  • Output: 0.5V – 4.5V linear voltage output. 0 psi outputs 0.5V, 50 psi outputs 2.5V, 100 psi outputs 4.5V.
  • Pressure Medium:The gas and liquid which is compatible with 316L stainless steel.
  • Electromagnetism Compatibility :EN50081-1.
  • Wiring connector: water sealed quick disconnect.Mating connector and wire harness (pigtail) is included.
Check Stock