Top Water Pump Oil Seals Reviews

New Pivot Works Linkage Rebuild Kit PWLK-K28-000 For Kawasaki KX 125, KX 250 F 04 05, KX 250 04 05 06 07, RMZ 250 04 05 06

  • Perfectly compatible with the original parts and meets or exceeds O.E.M. Specifications.
  • High quality and reliability manufactured in state of the art computer controlled facilities.
  • Best value for money, 60% of European manufacturers use these gaskets O.E.M..
  • Note: Kit contents vary by application. Usually includes water pump gasket, clutch cover gasket, water pump shaft oil seals, washers and bearings..
  • Fitment: KAWASAKI KX 250 F 2004-2008, SUZUKI RMZ 250 2004-2006.
Check Stock

Oil Rain Lamp"NEW REPLACEMENT PUMP/MOTOR" to Work with a Large Oil Rain Lamp for Lamp Seizes (31" or Taller)

  • This is a Replacement Pump for a Rain Lamp!.
  • Manufactured Specifically for Oil Rain Lamps with Seals Designed to Withstand Oil! The pump is designed to be Fully Submerged in Oil..
  • How do I tell what pump is right for my lamp? To identify which pump you need, Large or Small measure the entire height of your lamp from top to bottom. If your lamp measures anything from 30 inches or less, you need a Small size pump. If your lamp measures 31" or taller you will need a large size pump..
  • Still not sure which pump is right for you? Feel free to send us a picture of your lamp and we will be happy to identify which pump is right for your application..
  • We also provide detailed instructions on the installation of your pump and are also happy to provide technical support on your installation..
Check Stock

Anjon Manufacturing BFED5500 Big Frog EcoDrive Waterfall Pump 6500 GPH

  • Not oil filled- fish safe biodegradable oil for bearings only.
  • High quality seals for long and efficient pump life.
  • Overload sensor shut-off protection to keep pump from over heating or burning out.
Check Stock

Permatex 24200 Medium Strength Threadlocker Blue, 6 ml

  • Locks and seals while preventing parts loosening due to vibration.
  • Ideal for all nut and bolt applications 1/4" to 3/4" (6mm to 20mm).
  • Removable with hand tools for easy disassembly.
  • Suggested Applications: valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs.
Check Stock

Hot Rods TBK0075 Transmission Bearing Kit

  • A must have for any new transmission or engine case installation or repair.
  • Includes Hot Rods trusted bearings for primary and secondary shafts of transmission.
  • Includes special needle bearing for shift drum.
  • Does not include water pump bearing or counter balancer bearings or oil seals.
Check Stock

Bar's Leaks J-100 DiFM Cooling System Treatment - 5 Grams, Tan

  • Seals internal, external and coolant to oil leaks.
  • Inhibits the formation of rust and scale.
  • Helps control electrolysis and helps neutralize pH imbalance.
Check Stock

ZuwaUSA Drill Powered Pump ¾” 8 GPM - Marine Grade Aluminum | Unistar-2001A (Drill not included)

  • CONNECTION: 3/4” NPT | Dry self-priming to 13 Ft. | Max temperature 200°F | Working pressure of 58 PSI | The 3/8” shank fits all common chucks for most drills.
  • FLUID VISCOSITY: 1 (water) to 20,000 cP (heavy gear oil) | Transports a wide range of liquids, including liquids containing solids, oils, and corrosives.
  • DRILL POWERED: ZUWAUSA heavy-duty drill powered pump is designed to work with rechargeable/electrical drills with a maximum speed of 3,000 RPM.
  • FLUID TRANSFERS: water, seawater, wastewater, diesel fuel, biodiesel, vegetable oils, gear, motor and heating oil, detergents, antifreeze, chemicals, cooling lubricants..
  • EXAMPLE APPLICATIONS: diesel / home heating oil, remote sludge transfer, gear box oil changes, domestic water supply, flooded basements, barrel emptying/filling, draining waste oil, sewerage disposal, fueling vehicles, car wash, draining aquariums, disposal of cooling lubricants, bilge pump, booster pump..
  • OTHER TERMS FOR THIS PRODUCT: Coolant purge pump, Water purge pump, Oil purge pump, Fluid purge pump, Drill pump, portable water pump, portable oil pump, portable coolant pump, Heating oil transfer pump.
Check Stock

Jabsco Hotshot HD4 Kit - 12V 4GPM 60PSI Heavy Duty Washdown Pump w/25' Hosecoil

  • This high efficient fuel pump is an Perfect equipment for quick and clean oil-changes.It works great for pumping engine oil, crude oil and heating oil..
  • TSuitable for Oil crude oil Extractor used in motorcycles, caravans, cars, quads, industrial, water purification &treatmentequipmentvehiclecleaningagriculturalsprayingetc..
  • With handheld pump of Rotary Barrel Pump, more easily and safely to clean oil-changes. Built-in bypass valve and filter, easily accessible for cleaning oil pump..
  • Be widely used to draw water in yacht, fishing-boat, industry, etc.Fully automatic bilge pump, no separate float switch is needed..
  • Stainless Booster Water Pump/Electric Water Transfer Pump designed to transfer water from tanks, pools, rain barrels, and groundwater. Easy to set up and let it drain away from the accumulated water, ideal for both in-ground and above-ground pools..
Check Stock

High Pressure Oil Pump Master Service Kit with Base Gasket, HPOP Upgraded Full Compatible with 1994-2003 Ford Powerstroke 7.3L Diesel Engine 7.3L F250-F550, E250-E450, Excursion (Pack of 22 Set)

  • ★High Pressure Oil Pump Master Service Kit includes all the components you need to replace all seals and O-rings on your high-pressure oil pump and correctly reinstall the pump..
  • ★Comes with many components you won’t find in other HPOP seal kits on the market today.
  • ★Suitable for 1994-2003 Powerstroke 7.3L Diesel and 1995-2004 Navistar DT466 & T444E.
  • ★Package Include:2- Discharge port O-Rings,1- Rear Port Plug O-Ring,1- Non- Serviceable Port O-Ring,1- IPR Valve O-Ring,1- IPR Nut,1- Fill Plug O-Ring,1- Non-serviceable port long threaded repair plug,1- Set of Repair instructions,2- Diesel High Pressure Oil Pump STC Fittings,1- STC Quick Disconnect Tool,1- High Pressure Oil Pump Mounting Gasket.
  • ★100% satisfaction：If you are not satisfied with our High Pressure Oil Pump Master Service Kit ,please contact us,we will try our best to solve your problem..
Check Stock

RKX 3.0L 2006 + Vacuum pump Re-seal Rebuild kit compatible with Dodge / Mercedes Freightliner Sprinter

  • RKX 3.0 L vacuum pump reseal kit compatible with Dodge / Mercedes Benz Sprinter.
  • Includes all needed gaskets to rebuild the 3.0L pump and stop it from leaking oil. Dodge / Mercedes do not sell this kit as a spare part. They want....
  • Our custom injection molded seals are made from military grade Fluorocarbon (Viton) and designed to hold up under the extreme conditions of your....
  • Resealing your pump is cost effective and easy! Our kits included everything needed to seal your pump and stop it from leaking oil..
  • Fits Freightliner Sprinter 3.0L 2007 - 2017. Part number interchange info: A6462300165 , A 646 230 01 65, A6422300065, A 642 230 00 65.
Check Stock

PEGGAS 3/4\ Shaft Horizontal Pressure Washer Pump - 3000 PSI @ 2.5 GPM - Better than your OEM Pump and Engineered to work on most gas power washers.

  • 3,600 psi at 4.76 gpm, 13 hp at 3,400 rpm, 1-inch hollow shaft, horizontal mount direct-drive, 6.35 mm keyway, 3/4-inch standard garden hose inlet, 3/8-inch quick-connect outlet, 50°C (122°F) max. inlet water temperature.
  • Replacement pump kit with near-universal compatibility for standard 1-inch shaft direct-drive gas engines from Honda, Annovi Reverberi, RIDGID, Blackmax, Generac, Husky, Excell, Troy-Bilt, Sears, Briggs & Stratton, Campbell Hausfeld and more.
  • Forged brass and anodized aluminum construction with cooling fins.
  • Durable 15 mm ceramic-coated solid stainless steel plungers.
  • Detachable and pressure-adjustable internal bypass unloader valve with detergent injector and built-in water filter.
  • Includes detergent tube with strainer, set of extra O-rings, pre-filled SAE 15W-40 oil, and operating manual with spare parts list.
  • 7x5 toll-free phone, email and live chat support from Canada.
Check Stock

RKX 2.0T Vacuum Pump Reseal Rebuild Kit Compatible With VW Audi 2.0 T TFSI MK6 GTI GLI A3 MK7

  • RKX vacuum pump reseal kit compatible with Volkswagen Audi 2.0 T TFSI Engine Fits Pump part # 06H145100AD/AB/AK (see compatibility table below).
  • Includes all needed gaskets to rebuild the 2.0t TFSI vacuum pump and stop it from leaking oil. The Dealership does not sell this kit as a spare part.....
  • Our custom injection molded seals are made from military grade Fluorocarbon and designed to hold up under the extreme conditions of your engine..
  • Resealing your pump is cost effective and easy! Our kits included everything needed to seal your pump and stop it from leaking oil..
  • Compatible with: 2008.5 + Jetta, GLI, GTI, Golf, Passat, and A3, TT.
Check Stock

HALF OFF PONDS Piranha Series 5,500 GPH Direct Drive Submersible Pump for Water Gardens, Ponds and Waterfalls - PN-5500

  • POWER & EFFICIENCY - High flow, high head energy efficient direct drive technology is combined with superior stainless steel and reinforced fiberglass construction..
  • SMART DESIGN FOR SMALL SPACES - Upright design with space-saving footprint makes this pump ideal for skimmer and pondless waterfall installations with an intake-screen that prevents clogging..
  • DURABLE QUALITY - Direct drive motor provides years of life while providing the power needed to create heavy water flow. High quality seals for long and efficient pump life..
  • PERFORMANCE BEYOND IT'S PRICE - Engineered for 24-hour continuous use, while a heat-overload sensor prevents a burnout, with a vortex impeller that passes solids up to 1.25".
  • completely safe for fish, wildlife and aquatic plants. **Backed by a 2-year manufacturer's warranty!** With 100% U.S. Based Support and Service!.
Check Stock