Top Water Pump Arduino Connection Reviews

Hosyond 5Pcs D1 Mini NodeMcu ESP8266 ESP-12F Wireless WiFi Module Internet of Things Development Board Compatible with Arduino/WeMos

It is a mini NodeMcu Lua Wireless development board based on ESP-8266..
Compatible with Arduino IDE and WeMos D1 Mini..
4M bytes, 5V 1A switching power supply onboard,1MB flash memory.
11 digital input/output pins, all pins with interrupt/PWM/I2C/1-wire support (except D0).
1 analog input (3.2V max input). Micro USB connection..
D1 mini development board compatible with Arduino WeMos and can be programmed in the compatible for Arduino IDE..

Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board Bundled with R3 Board and Ethernet Shield W5100 for Arduino

The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory.R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
With this Ethernet Shield, for Arduino board can be used to connect to internet. Can be used as server or client. Directly plug puzzle board, no soldering required. It is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be ....

Check Stock

ACEIRMC 6pcs ESP8266 D1 Mini WiFi Dev Board ESP-12 ESP-12F NodeMcu Mini Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino

This is D1 mini , it is a mini NodeMcu Lua WiFi board based on ESP-8266EX..
D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini.
11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
1 analog input(3.2V max input). Micro USB connection.
WIFI development board,4M bytes.5V 1A switching power supply (switching power supply）onboard..
Our mini development board compatible with Arduino WeMos and can be programmed in the for Arduino IDE..

Check Stock

2771-20 M18 For Milwaukee Tool Water Transfer Pump (Bare Tool)

Features:Cordless Transfer Pump, Battery Platform M18, Maximum Flow Rate 8.
Voltage: 18V Length & Width x Height: 13.2" x 5.75" x 6" Head Height: Up to 75ft Outlet/Inlet Connections: 3/4" Lift up to 18' Weight: 7.9 lbs.
Faster Water Transfers, Faster Service Calls. The M18 Transfer Pump brings new to world cordless innovation to the industry with the fastest setup in the marketplace. With a self-priming pump, you can connect and go quicker than ever. The tool’s flexible impeller and powerful pump moves water at up to 480 gallons per hour, generates up to 18’ of lift and produces up to 75’ of head height..
Inlet connection: 3/4 in. brass Outlet connection: 3/4 in. brass Head height: up to 75 ft..

Check Stock

Jebao PP333L Water Pump with 10W Light (53 GPH)

These are the only way we carry the similar PP333L replacement pump.The pumps with a light are hard wired in and their cord does not disconnect from the pump. Cord length from pump to light 5 ½".
This is a small table top fountain pump. the PUMP SIZE length 2" , width 1 ⅝ " and height is 1 ⅙ ".
Cord length from pump to transformer connection is about 6'. Cord length from transformer to connection is about 15".
Many fountain manufactures will go to Jebao and have them make pumps with specific cord lengths and lights to fit their fountains. They will still be the same model number pump but they might have an additional cord or two. These are not produced for sale to the public. Just a short production run..

Check Stock

KEYESTUDIO Starter Kit V2 for Arduino with RJ11 Connector, Great STEM Education Kit for Students, Teachers and Hardware Enthusiast

Whenever you and your family go for vacations, you may used to get worried about your plants because they need water on regular basis. We develop this Automatic Plant Watering System to solve this problem as plants need water according to the moisture level of soil..
The kit includes a plus controller, DHT22 temperature and humidity sensor, I2C LCD, push button modules, power amplifier module, DS3231 clock module, non-contact level liquid sensor, motor driver module, capacitive soil humidity sensor, and pump..
More than 13 well-selected electronic modules and 17 step by step creative tutorials. Full example code is provided and explained and even includes useful software tool..
Multi-purpose: timing watering mode, and the sensor detection mode that when the soil is dry, Arduino will command the water pump to run(up to 4 plants at once)..
Our system measures the soil moisture and waters automatically according to it. A audio power amplifier module tells us when the bucket is empty. I2C LCD displays the temperature and humidity..

Check Stock

BURCAM 300514WHZ 1/3 HP Automatic Laundry Tub Pump, Black

1/3 HP AUTOMATIC LAUNDRY TUB PUMP: Designed for a maximum lift of 10' (3. 0m) to handle normal waste water from domestic washing machines, bar sinks and all waste water not containing solids. Mounts directly to tail piece. Fits under wet bars, kitchenettes, vanities and utility sinks (complete self-contained unit)..
LAUNDRY TUB PUMP: Automatic switch starts motor when water enters into the pump body. Allows sink installation without breaking concrete..
WATER PROOF DESIGN: 1/3 HP 115 V AC 60Hz Waterproof shroud protective cover to protect the pump from water damages..
PUMP CAPACITY: Capacity up to 1, 400 GPH. Maximum water temperature 60 degrees C (140 degrees F)..
EASY TO INSTALL: No trap or inlet piping required. No vent connection required..

Check Stock

ZuwaUSA Drill Powered Pump ¾” 8 GPM - Marine Grade Aluminum | Unistar-2001A (Drill not included)

CONNECTION: 3/4” NPT | Dry self-priming to 13 Ft. | Max temperature 200°F | Working pressure of 58 PSI | The 3/8” shank fits all common chucks for most drills.
FLUID VISCOSITY: 1 (water) to 20,000 cP (heavy gear oil) | Transports a wide range of liquids, including liquids containing solids, oils, and corrosives.
DRILL POWERED: ZUWAUSA heavy-duty drill powered pump is designed to work with rechargeable/electrical drills with a maximum speed of 3,000 RPM.
FLUID TRANSFERS: water, seawater, wastewater, diesel fuel, biodiesel, vegetable oils, gear, motor and heating oil, detergents, antifreeze, chemicals, cooling lubricants..
EXAMPLE APPLICATIONS: diesel / home heating oil, remote sludge transfer, gear box oil changes, domestic water supply, flooded basements, barrel emptying/filling, draining waste oil, sewerage disposal, fueling vehicles, car wash, draining aquariums, disposal of cooling lubricants, bilge pump, booster pump..
OTHER TERMS FOR THIS PRODUCT: Coolant purge pump, Water purge pump, Oil purge pump, Fluid purge pump, Drill pump, portable water pump, portable oil pump, portable coolant pump, Heating oil transfer pump.

Check Stock

Harris ProForce 1 HP Above Ground Swimming Pool Pump, 115V, Single Speed

Swimming Pool Pump: This pump features an extra large basket to increase time between cleanings. The clear lid makes it easy to see when cleaning is needed.
Heavy Duty Construction: Made with a stainless steel motor shaft and a thermoplastic body, this durable pump is built to withstand cold winters and hot summers.
Connection Sizes: 2″ external and 1.5″ internal connections give it wide compatibility with your pool.
115 Volt Connection: This all-weather 1 HP Above Ground pool water pump easily hooks up to any 115V circuit.
Important: This above ground pool pump system is not available for sale in the state of California.

Check Stock

Smraza Ultimate Starter Kit with Tutorial, Breadboard Holder, Jumper Wires, Resistors, DC Motor Compatible with Arduino R3 Project Compatible with Mega 2560 Compatible with Nano

Ultimate Starter Kit for Arduino, Mega - Includes more common use components what you need for starting with Arduino projects.
Easy to operate - With easy set-up breadboard holder makes a stable base for you to easy make electrical circuits connection.
Flexibly combination of Projects - All parts can be combined into 16 lessons, flexibly used 5V relay, LM35 temperature sensor and DC MOTOR.
Detailed tutorial - Provide PDF instruction, Software, libraries and Sample code for professional engineer or students to learn DIY projects for Arduino.
Quick-response technical support - If you need any help, please contact us by Amazon.

Check Stock

Wztepeng Washdown Pump Kit 70 Psi 12V 3.0 GPM Water Pressure Pump With Spray Nozzle For Boat Car Caravan RV UTV Marine Yacht etc

...tor, a UV-protected 25' Coiled Hose, two NPT Connectors with 1/2" Straight Barb, and a Universal Saltwater Filter/Strainer..
Easy Connecting: This water dash pump has an externally threaded port pump head, available in various sizes, and can mount styles for easy connection to any outlet. The water pipe's threaded connection is made of high-quality brass, and the filter can be removed for cleaning..
Various Uses: The 12v water pump is designed for intermittent use with a duty cycle of 30 minutes and is suitable for fresh or saltwater. Ideal for cleaning boats, fish tanks, anchor chains, beacon stations, and boats. It can also be used to clean ships, RVs, and leisure decks..

Check Stock

SunFounder R3 BoardBundled with Mega 2560 R3 ATmega2560-16AU Board for Arduin

R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory..
R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..

Check Stock

SeaChoice 19301 Submersible 2000 GPH Bilge Pump

【Specification】：Outlet Diameter : 29mm/ 0.95 Inch (1-1/8") POWER：1100 GPH Current(A）：3.2A Volt：12V.
【Automatic mode connection】：Connect black wire to negative,Connect brown wire to positive,the pump will be shut off automatically when the water is pumped out.This auto bilge pump 1100 gph would improve work efficiency and could be used for a long term..
【Advantages】:Equipped with built in electronic controlled sensor system for easy fully automatic operation.It is a small automatic boat bilge pump and it is rustproof and corrosion resistant..
【Warning】:This auto boat bilge pump is designed for use with fresh water and salt water only. And polarity is important. If it is not correct, the pump rotate backwards..
【Applications】:Ideal For Fishing Boats, Cruisers, Runabouts, Yachts, skiff, etc..

Check Stock