Water Hose Continental ContiTech ¾” x 100’ BLACK RUBBER - Industrial Grade - US Made
- Water Hose BLACK RUBBER Heavy Duty Industrial 200psi 3/4” x 100’ with brass fittings.
Top Water Hose Fittings Reviews
Water Hose Continental ContiTech ¾” x 50’ BLACK RUBBER - Industrial Grade - US Made
- Water Hose BLACK RUBBER Heavy Duty Industrial 200psi 3/4” x 50’ with brass fittings.
Soaker Hose 100 FT for Garden Beds,Heavy Duty 3/4" Solid Brass Connector 1/2" Soaker Garden Hose for Flower,Vegetable Beds, Tree,Lawn and Plant (150 FT)
- ...ameter soaker hose but also include a rich range of accessories for a variety of uses,help you make custom length soaker hoses easy, allow you to expand the length if needed..
- ✅UPGRADE MATERIAL Upgraded the formula of the soaker hose,Lightweight,constructed of a sturdy rubber with very strongly attached brass hose fittings. Now the soaker hose is softer and more elastic than before, and it is not easy to break!Thick, durable, resilient and anti-oxidation. No cracks avoid leak and water sprays out. Environmentally friendly and pollution-free..
- ✅SAVE UP WATER: Save up to 80% water!The hose "sweated" the water slowly, evenly and at a nice rate.Use less water to keep your plants growing and healthy, targeting only the base of your plants.Slow penetration of water in the soil, avoiding loss of nutrients, and favorable for uniform crops absorption of nutrients and moisture,improving fertilizer efficiency..
- ✅Easy to Install: Easy to unfold in garden, raise/flower bed, ground cover or other landscaped areas.Installing the hose system above or below in your garden is simple enough for just about anyone to do.These soaker hose fittings are easier to connect and disconnect.You can screw the end of the soaker hose fittings into the end of either another hose ....
Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession
- 10 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
- WATER TANK MEASUREMENTS: 19” Longest Length (not including fittings) x 9” x 14” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession
- 21 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
- WATER TANK MEASUREMENTS: 34” Longest Length (not including fittings) x 9” x 16” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession
- 40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
- WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe....
Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession
- 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
- WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male ....
1/2’’ Soaker Hose for Garden 50 Ft, Soaker Hoses for Garden 100 Ft, Garden Soaker Hose 25 Ft Drip Hoses for Garden Drip Garden Hose Irrigation System (50 ft)
- ... dry and free from fungal growth, while helping you conserve water. Then you will use less water to keep your plants growing and healthy, targeting only the base of your plants. Soaker hoses usually have a low up-front investment for the average home garden. They work well on timers to further conserve water..
- Screw Fittings And Easy To Install - The soaker hose fittings are screw fittings. You can screw the end of the hose into the end of either another hose or the exterior faucet on your house. Installing a soaker hose is easy: simply hook up to the nearest faucet or rain barrel and snake around the plants you want watered..
- Pressure And Length - Ideally, for this type of soaker hose, you are going to want the pressure to be about 10 PSI so that the water drips out of the hose slowly. If the pressure is too high, it will become a sprinkle. These soaker hoses come in 25 ft, 35 ft, 50 ft, 75 ft, and 100 ft lengths, so decide which one you prefer. Anything longer than these lengths will decrease the water pressure or need higher water pressure..
BISupply 10 Foot Water Pump Hose for Water Transfer Pump - Spigot Suction Intake Outtake Clear PVC Hose with Couplings
- [Transfer Water Anywhere]: The BISupply 10-Foot Transfer Water Pump Suction Hose is a transparent PVC hose that is lightweight and portable.
- Use to evacuate a flooded yard, pump out water from a barrel, and more.
- [Perfect Size]: 10-foot (3m) long water pump hose has brass male and female end fittings.
- Fittings designed to fit standard garden hose spigot.
- [Use Your Pump]: Threaded brass ends for use with your water pump.
- Fits any sized pump with necessary adapter pieces (adapter and rubber gasket not included).
- [No Collapsing]: Constructed from transparent, flexible PVC that is reinforced to handle full vacuum (suction) and pull water from a source through your pump without collapsing.
- [Package Contents]: Hose water pump package includes (1) water suction hose, male/female brass couplings, and (6) plastic zip ties.
1/2’’ Soaker Hose 100 Ft for Garden Beds , Soaker Hoses for Garden 100 Ft, Garden Soaker Hose 25 Ft Drip Hoses for Garden Drip Garden Hose Irrigation System (100 feet)
- ... dry and free from fungal growth, while helping you conserve water. Then you will use less water to keep your plants growing and healthy, targeting only the base of your plants. Soaker hoses usually have a low up-front investment for the average home garden. They work well on timers to further conserve water..
- Screw Fittings And Easy To Install - The soaker hose fittings are screw fittings. You can screw the end of the hose into the end of either another hose or the exterior faucet on your house. Installing a soaker hose is easy: simply hook up to the nearest faucet or rain barrel and snake around the plants you want watered..
- Pressure And Length - Ideally, for this type of soaker hose, you are going to want the pressure to be about 10 PSI so that the water drips out of the hose slowly. If the pressure is too high, it will become a sprinkle. These soaker hoses come in 25 ft, 35 ft, 50 ft, 75 ft, and 100 ft lengths, so decide which one you prefer. Anything longer than these lengths will decrease the water pressure or need higher water pressure..
Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK
- 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
- WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Th....
Lifynste Garden Hose Elbow Connector, 90 Degree Brass Garden Hose Elbow Adapter with Shut Off Valves
- HIGH QUALITY MATERIAL: The brass hose elbow is made of 100% solid brass, durable, corrosion proof and has a long service time. Includeds 2 extra rubber washers included to prevent leaking..
- ELIMINATE STRAIN: 90 degree garden hose elbow connector eliminates strain on hoses and water intake fittings, will extend the life of your garden hose by preventing twisting and straining..
- CONVENIENCE: Standard 3/4 In. Our garden brass hose connector is designed to easily accommodate all standard hoses, equipped with high quality ball valves for easy and hassle free water flow..
- THOUGHTFUL DESIGN: If your garden spigot is too close to the ground or wall, then our hose elbow connector is a must-have wonder. Perfect to change angle of conection, helps reduce unnecessary stress and strain on water intake hose fittings, easy to hook up water sprinkler timer, outdoor water faucet, great for garden, RV, lawn, etc..
- PACKAGE INCLUDES: The 2 pack garden hose connectors comes with 2 pcs free rubber gaskets for replacement. TIPS: For outdoor use with cold water only. If for any reason you're not 100% SATISFIED, please let us know and our customer team will help you RETURN OR REFUND..
Class A Customs | 25 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2500-BPK-PUMP
- 25 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS 33.5” Longest Length (not including fittings) x 10” x 17”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID V....