Top Wall Switch Arduino Reviews

MELIFE 5Pack L298N Stepper Motor Driver Controller Board Dual H Bridge Module for Arduino Smart Car Power UNO MEGA R3 Mega2560

  • Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects.
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient.
  • No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use.
  • External size 43*43*27mm / 1.69*1.69*1.06 inch, voltage 5V-35V, drive current 2A (Max single bridge).
  • Great for Arduino DIY Smart Car Robot Power UNO MEGA R3 Mega2560 Duemilanove. If driving voltage is more than 12V, please use external standard 5volt TTL outputs to switch the H-bridge circuits.
Check Stock

SunFounder 2560 R3 Project Super Starter Kit with 2560 Controller Board and R3 Controller Board

  • For Arduino kits and Affordable Price - This is a complete Kit with more than 200pcs components for adults, students and beginners.. Includes 2560 controller board and USB cable, 100% compatible with Arduino Mega 2560 R3 Mega328 Nano for Arduino kit..
  • Detailed Instructions - This 2560 Kit with detailed pdf tutorial in the CD, you can learn to code and program faster and easier with all the components..
  • 25 Projects Provided - As an upgraded starter kit compatible with arduino 2560 controller board, more than 20 interesting lessons are included. Allowing for a dynamic creative learning experience..
  • Compatible with Arduino- R3 board compatible with Arduino,use ATMEGA16U2 chip, Faster transfer rates and more memory..
  • Control using r3 ATmega328P chip, Includes new pin configuration (SCL, SDA, IOREF) Clearly print on the female header connector, more precise and easier to use the wire..
Check Stock

ACEIRMC 6pcs Nano V3.0 3.0 Controller Terminal Adapter Expansion Board Nano IO Shield Simple Extension Plate for Arduino Mano AVR ATMEGA328P

  • Designed for Arduino for Nano V3.0: The item is a terminal expansion adapter, working very well for prototyping Arduino for Nano projects.
  • It lables for Arduino for Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order)..
  • You can use this adapter to easily hook up for arduino for Nano to an outside world via hook up wires.
  • This item is a terminal expansion adapter, designed for Arduino Nano V3.0..
  • Nano Terminal Adapter Shield Expansion Board Compatible with Arduino Nano V3.0 AVR ATMEGA328P-AU Module.
Check Stock

Complete Ultimate STEM Electronic Projects Starter Kit for Arduino with Mega2560 LCD1602 Servo Stepper Motor Sensors Breadboard Jumper Wire Resistor Capacitor Transistor and Tutorial

  • This is an upgrade complete Arduino starter kit designed for beginners and electronic hobbyists..
  • With more than 33 projects, it is esay and convenient for you to learn Arduino and programming. If you need the guide of the projects, just email us after you getting the mega2560 starter kit...
  • The starter kit will make a great gift for any to-be engineers, or anyone looking to get a jump start in the world of microcontrollers and programming. Hundreds of tutorials and guides can be found online and the range of projects that can be created with an Arduino is vast.
  • This kit comes with everything that the average beginner Arduino project requires, plus more, 50 kinds of different electronic components, more than 180 components, such as Arduino Mega2560, 1602 LCD display are included. It has enough variety to learn most of what can be done with the arduino and electronics in general.
  • The kit is a great help for you learning electronics! Lots of little bits to start doing Arduino things.
Check Stock

2Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • ! ! ! Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact us..
Check Stock

6Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 LED Strip Light Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact US..
Check Stock

9V Battery Holder E-outstanding 2PCS Black 6F22 9V Battery Storage Case Box with 2.1x5.5mm DC Male Plug and Wire Leads for Arduino UNO R3 Battery Clip Container

  • Made of high quality materials. Lightweight and easy to carry..
  • Designed with spring clips for easy battery installation and removal..
  • EASY TO INSTALL AND SAVE WORK: The cable comes with a 9V battery holder and 3 screw fixing holes on the base for easy fixation.
  • With this snap cable you can save yourself the work of soldering the battery snap to the DC coax plug.
  • Widely used in Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, Development Boards, Evaluation Boards, Breadboards, Arduino DIY,....
Check Stock

WMYCONGCONG 8 Pcs KY-040 360 Degree Rotary Encoder Module with Knob Cap for Arduino

  • The rotation counts are not limited, designed with continuous 360 degree rotation sensors..
  • Reset to its initial state with the buttons on the rotary encoder, starts counting from 0..
  • Designed with detent and push button switch feature, comes with nuts and washers, ideal for Arduino micro controller use..
Check Stock

Keywish Scratch Starter Kit,Super Base Sensor Modules Kit Based on Arduino UNO R3 ATmega328P with 30 Lessons Tutorial Compatible with Arduino IDE Mixly Mblock Graphical Programming

  • ✔ High-quality kit: Contains 48 electronic components Kits for Arduino,which fully meet the components required by beginners.All of the Components, breadboard and Integrated Circuits are individually packaged and labeled, and packing in a plastic box.Instruction Link：https://github.com/keywish/keywish-uno-starter-kit.
  • ✔ Graphics programming: Support scratch 3.5, MagicBlock based on Arduino platform, easy to learn and improve writing efficiency..
  • ✔ Strong compatibility: 100% compatible with Arduino UNO R3, NANO,for Arduino IDE, Mixly and Mblock..
  • ✔ Free video tutorial: Comes with tutorial. Free 30 Lessons PDF tutorial from Official website download or you can contact our customer service..
  • ✔ Different gifts: Exquisitely packaged. This is the perfect starter kit for arduino,which as a gift for students, children and friends in the school season, Christmas, New Year, birthday, parties, performances, special occasions, etc..
Check Stock

EEEEE UNO R3 ATMEGA328P ATMEGA16U2 & Multi-Function Shield Starter kit (2 in 1) for Sensor WiFi Relay Bluetooth Module with Digital Display Switches with USB Cable Compatible with Arduino IDE

  • 1. Using this Ethernet shield, your for Arduino board can be used to connect to the Internet and can be used as a server or client..
  • 2. This Arduino Ethernet shield based on Wiznet W5100 Ethernet chip provides you with a way to easily get Arduino Online, because it is directly supported by the official Arduino Ethernet library..
  • 3. It adds a micro-SD card slot, which can be used to store files provided through the network..
  • It is compatible with Arduino Duemilanove (168 or 328), Uno and Mega (1280/2560) and can be accessed using the SD library..
  • 4. Wiznet W5100 provides a network (IP) stack that can support both TCP and UDP..
Check Stock

Arduino Nano [A000005]

  • The Arduino Nano is one of the smallest Arduino boards available on the market.
  • Tiny form factor, complete, and breadboard-friendly board based on the ATmega328.
  • Arduino is an open-source hardware, software, and content platform with a worldwide community of over 30 million active users.
Check Stock

Adafruit ATWINC1500 WiFi Breakout

  • Good when you want a lower-power and lower-voltage setup.
  • Same core chip in the Arduino UNO/Duemilanove/Mini/etc.
  • 95% of Arduino projects will work out of the box.
Check Stock

Bluetooth Thermometer

  • Read temperature from a bluetooth enabled development board (Arduino, Raspberry Pi , ...).
  • Read schematics for an Arduino development board.
  • Write simple Arduino code to send the data.
Check Stock