Top Wall Mounting Reviews

StarTech.com 4U Wall Mount Network Rack - 14 Inch Deep (Low Profile) - 19\ Patch Panel Bracket for Shallow Server and IT Equipment, Network Switches - 44lbs/20kg Weight Capacity, Black (WALLMOUNT4)

  • 4U WALL MOUNT RACK: This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 14 in [35 cm], recommended for networking equipment up to 12in deep, leaving 2in for cable routing.
  • maximum weight capacity of 44 lbs [20kg].
  • EASY TO INSTALL: The 4U wall mounting patch panel bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts for easier equipment installation, to save you the hassle of sourcing separate mounting hardware.
  • COLD-ROLLED STEEL CONSTRUCTION: The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution & includes wall mounting hardware.
  • Installs onto 16" studs with mounting holes.
  • EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room, wiring closet, classroom.
Check Stock

Iwillink 24 Port Patch Panel, Cat6 Patch Panel, RJ45 Keystone Network Patch Panel Rackmount or Wall Mount

  • 6U WALL MOUNT RACK: This 6U 35cm deep wall mounting bracket has an open frame, 2 post design with a maximum mounting depth of 35 cm [13.78 in.] and a maximum weight capacity of 19.9kg [44.2lb].
  • EASY TO INSTALL: The 6U wall mounting bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts for easier installation, to save you the hassle of sourcing separate mounting hardware.
  • COLD-ROLLED STEEL CONSTRUCTION: Made of sturdy cold rolled steel, you can rely on this mounting bracket to keep your network equipment safe and sound. This bracket is perfect in areas where space is at a premium.
  • OPTIMIZE STORAGE SPACE: The 6U wall mounting bracket delivers a dependable equipment storage option, allowing you to wall mount equipment for a more efficient and accessible operating environment.
Check Stock

HQYing 2U Wall Mount Patch Panel Bracket-19 Inch Vertical Wall Mount Rack- 125 Pounds Heavyload Wall Mountable Server Rack 2U Black

  • Product Size: 5.9" High, Fitting your Standard 19" Server or Networking Equipments..
  • Heavy Duty Loading: Made of one Piece of Steel and Makes the Bracket Strong Enough to Load 125 lbs Maxly..
  • Vertically or Horizontally Mounting: This multi-use patch panel bracket enables you to mount your equipment vertically on a wall or horizontally under....
  • No Assembly Required: the wall mount patch panel bracket arrives fully assembled with cage screws for mounting equipment in your data center.
  • Standard Wall Mounting Holes: Wall Mounting Holes are 16-inch Center to Center for Mounting to Standard Wall Studs..
Check Stock

HW-J550 Wall Mount for Samsung HW-J450 Soundbar with Wall Fixing Accessories

  • ▶▶Wall Mount Bracket ▶ Soundbar mount are designed for Samsung HW-J550 HW-J450 soundbar.
  • ▶▶Save Space ▶ Soundbar bracket provides unobtrusive wall mounting, perfect for mounting on the edge of the wall to get enough space, is a....
  • ▶▶Easy to Install ▶ Our wall fixing bracket with mounting screw set, quick and easy to fit, bring you maximum convenience.
  • ▶▶Feature▶ This sound bar mounting bracket are made of high quality metal, stably, sturdy & durable. Is a good HW-J450 bracket, HW-J450 mount,....
  • ▶▶180 Days Warranty ▶ Package Include: 2 * sound bar brackets, 9 * long screws, 2 * short screws, 8 * wall anchors. If you had any problem,....
Check Stock

Mounting Dream TV Wall Mount for Most 37-70 Inch Flat Screen TV Tilting, Low Profile Space Saving Wall Mount for 16\

  • ...vy duty TV wall mounts fits most 37"-70" flat screen or curved TVs with weight up to 132lbs, 60 in kgs. Generally, common 37,40,42,43,46,48,49,50,55,60,65,70 inches, OLED/LCD/LED/Plasma TVs are all covered, of major TV/Monitor brands like Samsung/LG/TCL/Sony/Vizio/Hisense/Toshiba etc. VESA wall mount works for VESA mounting pattern ranging from 200x100mm to 600x400mm. Extra wide TV mounting bracket with 24-inch wall plate, is compatible with 16”, 18”, 24” wood stud, concrete/brick wall as well (Note: dry wall alone excluded)..
  • [Tilt TV Wall Mount]: Adjustable angled TV mount can be freely tilted by max 8 degree, to reduce screen reflection glare and neck/eye strain for better comfortable viewing. When the brackets are at 0°, this flat TV mount surely creates a sleek look. Search MD2163-K for the no tilt version flush wall mount..
  • [Low Profile Wall Mount for TV]: Slim TV wall mount keeps TV just 1.5’’ flush profile against wall, very much of streamlined and tidy looking, easy to blend in with any decor. Mounting TV over a TV stand, this TV wall bracket is greatly saving space for consoles on entertainment center..
  • [Simple TV hanger]: Major TV mounting hardware kits are included in the TV bracket package, like multi-size TV screws, sp....
Check Stock

Arlington LV1-10 Low Voltage Mounting Bracket, 1-Gang, Black, 10-Pack

  • Mounting bracket has Oval holes that allow final shifting and straightening.
  • Easy to install, for mounting low voltage wires(phone, internet, TV, video).
  • Adjusts to fit various wall thickness, the bracket wings secure when mounting screws are tightened.
  • Bracket is its own template for cut-out, trace the bracket then cut the hole.
  • Horizontal or vertical mounting, installs faster and costs less than metal brackets, UL/CSA Listed.
  • Adjusts to fit 1/4-inch to 1-inch thick wall board, paneling, or drywall.
  • Mounting brackets offer specially designed screw holes that deliver a better looking, easy to install job.
Check Stock

StarTech.com 6U Wall Mount Network Rack - 14 Inch Deep (Low Profile) - 19\ Patch Panel Bracket for Shallow Server and IT Equipment, Network Switches - 44lbs/20kg Weight Capacity, Black (WALLMOUNT6)

  • 6U WALL MOUNT RACK: This 6U 35cm deep wall mounting bracket has an open frame, 2 post design with a maximum mounting depth of 35 cm [13.78 in.] and a maximum weight capacity of 19.9kg [44.2lb].
  • EASY TO INSTALL: The 6U wall mounting bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts for easier installation, to save you the hassle of sourcing separate mounting hardware.
  • COLD-ROLLED STEEL CONSTRUCTION: Made of sturdy cold rolled steel, you can rely on this mounting bracket to keep your network equipment safe and sound. This bracket is perfect in areas where space is at a premium.
  • OPTIMIZE STORAGE SPACE: The 6U wall mounting bracket delivers a dependable equipment storage option, allowing you to wall mount equipment for a more efficient and accessible operating environment.
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....
Check Stock

Universal Vertical Pole Mount Adapter with 2 Loops, Wall Mounting Bracket for CCTV Security Camera PTZ Dome (1 Pack)

  • *MATERIALS: Quality Metal, Color:Ivory,Type: Indoor, Wall,Pillars and Ceiling,Conner Wall mounting CCTV camera bracket.
  • *Package Includes: 1x Pole Wall Mounting Bracket +2 x Φ100mm. Used for Pole Mounting Stainless Steel Clasp, Easy to adjust the size on different columns Works as an adapter to allow users to mount anything to a vertical pole.
  • * Item Size: Approx. 110x100x45mm Can be used for Hikvisionn or Dahua dome cameras,or other universal dome camers.
  • *Easy to install and adjust the direction of the camera Standard size is compatible with most surveillance camera. It is suitable for indoor, outdoor, top, wall and ceiling mounting.
  • *Application: Used for Pole Mounting Stainless Steel Clasp,Works as an adapter to allow users to mount anything to a vertical pole.
Check Stock

CondoMounts Heavy Duty 19-Piece 90lbs NO Stud Drywall or Metal Stud Mounting Kit for TV Frame TV No Gap Mount Mounting kit.

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • FRAME TV MOUNTING KIT : Perfect for Mounting Frame TV Mount directly on drywall without the need for studs. 3/16 screws fit frame tv NO gap wall mount..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • FULL PACKAGE- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting experience..
Check Stock

Rocketfish Tilting TV Wall Mount for Most 19\ to 39\ TVs - Black (RF-HTVMTAB)

  • UNIVERSAL TV WALL MOUNT: TV mount fits for most 42-75 inch TVs up to 100 lbs., with max VESA of 600mm x 400mm/24" x 16" and 16" wood studs spacing. Not perfect? Please check MD2298 or MD2298-XL Mounting Dream TV wall mounts for the best options..
  • FULL MOTION TV MOUNT: This full motion TV wall mount tilts the TV backward 5° and forwards 15° to reduce screen glare. Swivels TV +/- 45° to cover different viewing positions. Pulls out to 16.6" for pointing TV where you want and retracts back to 2.5" for a slim look. +/- 4° post-install leveling for maximum installation flexibility..
  • SOLID AS A ROCK: Mounting Dream TV wall mount swivel and tilt designed with 6 articulating arms. The Wall mount for TV is constructed of high-quality cold-formed steel for the ultimate in safety and reliability to keeping your TV and family safe..
  • EASY & QUICK INSTALLATION: Wall mounts TV bracket comes with clear instructions and all hardware in pre-labeled bags. The paper template and 4 cable clips are good helpers to make the TV brackets mounting easier and quicker. (Additional concrete anchors need to be obtained through Mounting Dream customer service. Anchors Specifications：φ10x50mm).
  • US-BASED CUSTOMER SUPPORT: What are you waiting for? Let’s get that TV mou....
Check Stock

Buyer's Point Single Gang Low Voltage Mounting Bracket Device [UL Listed] (1 Gang, 10 Pack) for Telephone Wires, Network Cables, HDMI, Coaxial, Speaker Cables (10)

  • New Model: No more gaps, Wall Plates Mount Flush Against Wall. Cable Management.
  • Easy to install, for mounting low voltage wires(phone, internet, TV, video, switch cover).
  • Drywall Horizontal or vertical mounting. Great for Wire Brush, Pass Through Holes.
  • 10-pack of Low Voltage Mounting Brackets. Television Dry wall Cord Hider.
  • Adjusts to fit various wall thickness, the bracket wings secure when mounting screws are tightened.
Check Stock

JINGCHENGMEI 3U 125 lb Weight Capacity Heavy Duty 19 Inches Steel Vertical Patch Panel Mounting Bracket for Networking Equipment (MFT-HVWRF3U)

  • STANDARDIZED HOLE SIZING: The mounting holes on the wall rack mount are 16 inches center to center for greater stability, and mounting to standard wall studs.
  • DURABILITY: Constructed to EIA-310 19in rack standards, the wall mount data rack features a solid steel design for ultimate durability. Max weight loading capacity: 125 pounds..
  • NO ASSEMBLY REQUIRED: For added convenience, this wall mount patch panel bracket arrives fully assembled with cage screws and nuts for mounting equipment..
  • VERSATILE FUNCTIONALITY: This multi-use patch panel mounting bracket enables you to mount your server or networking equipment vertically on a wall or horizontally under a desk for added versatility.
  • ENVIRONMENTALLY FRIENDLY: this foldable rack is at less volume, lower freight charge, smaller packaging. Easy to carry..
Check Stock