Top Wall Mounting Brackets Reviews

KES Bathroom Tempered Glass Shelf 14-Inch 8MM-Thick Wall Mount Rectangular Polished Chrome, BGS3202S35

  • All Hardware & Instructions Included: 8MM- thick tempered glass, rustproof metal bracket (zinc alloy) and wall-mounting 304 stainless steel CONCEALED screws are all included, no need to purchase extra hardware..
  • Extra-thick (8MM) Tempered Glass: Safe use & kid-friendly. When broken, it crumbles into small granular chunks instead of splintering into jagged shards as plate glass does, less likely to cause injury..
  • Sturdy Design: Brackets are constructed of zinc alloy ensuring durability and dependability..
  • Dimensions: The mounting distance between two brackets is suggested to be 220 mm, not exceeding 330 mm. The distance from brackets to the wall is about 5 mm, enabling the cables of electric toothbrush to pass through..
  • Note: MAX. Load 11 lbs for screw mounting on solid concrete wall..
Check Stock

Outdoor Mounting Bracket for Ductless Mini Split Air Conditioner Heat Pump Systems, Universal, 9000-36000 Btu Condenser

  • Heavy Duty Outdoor Wall Bracket. Fits 9000-36000 Btu Units. Dimensions: Width: 33.5" Height: 18" Depth: 22".
  • Adjustable for use with up to 9,000 - 36,000 BTU Units not exceeding a maximum weight capacity of 350 lbs. It includes hardware for wall mounting.
  • The use of mounting brackets raises the condensing unit above ground level for multi-floor mounting. As an alternative to ground level pads, some consumers find the use of mounting brackets useful for greater placement versatility and greater protection from dirt, snow, debris, floods, vandalism, etc..
  • Slight rearward tilt is designed for safety purposes. Bracket is designed for masonry wall mount, for stud wall mount proper blocking must be made between studs to insure bracing will accommodate bracket weight load. Requires 1/2 inch (12 mm) bit..
Check Stock

Set of 2 Shelf Brackets 5 7/8 X 7 7/8 Inches Heavy Duty Iron L Brackets with Rust Finish for Shelves Corner Shelf Wall Mount Bracket DIY Kitchen Shelving Right Angle Braces

  • HEAVY DUTY SHELF BRACKETS: These authentically designed corner wall shelf brackets are HANDCRAFTED in IRON and are ADJUSTABLE, so mounting them in either direction can be done makes it easy for you to use according to your convenience. These heavy duty shelf brackets can hold up to 60 lb. These Right Angle L Shelf Brackets can hold up to 6” or 8” deep shelves..
  • DIMENSIONS & WEIGHT CAPACITY: Corner brace shelf bracket having dimensions of the L Brackets are as follows.
  • LENGTH: 5 7/8”, HEIGHT: 7 7/8”, WIDTH: 1 5/8”. Weight capacity per pair: 60 lbs. Sold as a Set of 2. The pack includes screws as well, which will help you secure the L Brackets safely..
  • VARIOUS USAGE: These corner shelf wall mount brackets can be used for decorating your home office or store shelves. These shelf brackets are elegant and sophisticated enough for indoor use while also being tough and durable enough for outdoor use without wear or corrosion. Shelf braces can also be used for mounting cisterns, sinks, roof supports, columns, pillars. and frames giving an extra edge to your decor..
  • CLASSIC QUALITY FINISH: These Right Angle Brackets are Rust finish. This is done to keep away rust & premature wearing, Keeping the shelves look pristine for as long as you need them. ....
Check Stock

Set of 2 Shelf Brackets 5 7/8 X 7 7/8 Inches Heavy Duty Brass L Brackets with Brass Finish for Shelves Corner Shelf Wall Mount Bracket DIY Kitchen Shelving Right Angle Braces

  • HEAVY DUTY SHELF BRACKETS: These authentically designed corner wall shelf brackets are HANDCRAFTED in BRASS and are ADJUSTABLE, so mounting them in either direction can be done makes it easy for you to use according to your convenience. These heavy duty shelf brackets can hold up to 60 lb. These Right Angle L Shelf Brackets can hold up to 6” or 8” deep shelves..
  • DIMENSIONS & WEIGHT CAPACITY: Corner brace shelf bracket having dimensions of the L Brackets are as follows.
  • LENGTH: 7 7/8”, HEIGHT: 5 7/8”, WIDTH: 1 5/8”. Weight capacity per pair: 60 lbs. Sold as a Set of 2. The pack includes screws as well, which will help you secure the L Brackets safely..
  • VARIOUS USAGE: These corner shelf wall mount brackets can be used for decorating your home office or store shelves. These shelf brackets are elegant and sophisticated enough for indoor use while also being tough and durable enough for outdoor use without wear or corrosion. Shelf braces can also be used for mounting cisterns, sinks, roof supports, columns, pillars. and frames giving an extra edge to your decor..
  • CLASSIC QUALITY FINISH: These Right Angle Brackets are Heavy Duty ANTIQUE BRASS finish. This is done to keep away rust & premature wearing, Keeping the shelves look pristine for as lo....
Check Stock

Set of 2 Shelf Brackets 9 7/8 x 7 3/8 Inches Heavy Duty Brass L Brackets with Polished Brass Finish for Shelves Corner Shelf Wall Mount Bracket DIY Kitchen Shelving Right Angle Braces

  • HEAVY DUTY SHELF BRACKETS: These authentically designed corner wall shelf brackets are HANDCRAFTED in BRASS and are ADJUSTABLE, so mounting them in either direction can be done makes it easy for you to use according to your convenience. These heavy duty shelf brackets can hold up to 60 lb. These Right Angle L Shelf Brackets can hold up to 8” or 10” deep shelves..
  • DIMENSIONS & WEIGHT CAPACITY: Corner brace shelf bracket having dimensions of the L Brackets are as follows.
  • LENGTH: 7 3/8”, HEIGHT: 9 7/8”, WIDTH: 1 7/8”. Weight capacity per pair: 60 lbs. Sold as a Set of 2. The pack includes screws as well, which will help you secure the L Brackets safely..
  • VARIOUS USAGE: These corner shelf wall mount brackets can be used for decorating your home office or store shelves. These shelf brackets are elegant and sophisticated enough for indoor use while also being tough and durable enough for outdoor use without wear or corrosion. Shelf braces can also be used for mounting cisterns, sinks, roof supports, columns, pillars. and frames giving an extra edge to your decor..
  • CLASSIC QUALITY FINISH: These Right Angle Brackets are Polished Brass finish. This is done to keep away rust & premature wearing, Keeping the shelves look pristine for as long as you....
Check Stock

Set of 2 Shelf Brackets 5 7/8 X 7 7/8 Inches Heavy Duty Brass L Brackets with Brushed Nickel Finish for Shelves Corner Shelf Wall Mount Bracket DIY Kitchen Shelving Right Angle Braces

  • HEAVY DUTY SHELF BRACKETS: These authentically designed corner wall shelf brackets are HANDCRAFTED in BRASS and are ADJUSTABLE, so mounting them in either direction can be done makes it easy for you to use according to your convenience. These heavy duty shelf brackets can hold up to 60 lb. These Right Angle L Shelf Brackets can hold up to 6” or 8” deep shelves..
  • DIMENSIONS & WEIGHT CAPACITY: Corner brace shelf bracket having dimensions of the L Brackets are as follows.
  • LENGTH: 5 7/8”, HEIGHT: 7 7/8”, WIDTH: 1 5/8”. Weight capacity per pair: 60 lbs. Sold as a Set of 2. The pack includes screws as well, which will help you secure the L Brackets safely..
  • VARIOUS USAGE: These corner shelf wall mount brackets can be used for decorating your home office or store shelves. These shelf brackets are elegant and sophisticated enough for indoor use while also being tough and durable enough for outdoor use without wear or corrosion. Shelf braces can also be used for mounting cisterns, sinks, roof supports, columns, pillars. and frames giving an extra edge to your decor..
  • CLASSIC QUALITY FINISH: These Right Angle Brackets are Brushed Nickel finish. This is done to keep away rust & premature wearing, Keeping the shelves look pristine for as long as you ....
Check Stock

White Gridwall Mount Brackets, Economical Grid Panel Flush Mounting Clips - 20 Pack

  • Use our gridwall mounting clips to easily mount & secure your grid panels flush against your wall. Our mounting brackets come in a white finish and will hold grid panels with up to 1/4" thick wire..
  • Simply place the grid against the wall, secure the bracket across the wire & screw it into the wall. The bracket mounts have a small half circle loop that goes over the wire. No screws are included..
  • They measure .5" H x .78" L and have a 1/5" diameter hole so you can easily screw the panel into your wall..
  • NOTE: These clips need to be screwed directly into the stud of your wall. They may not securely hold your panel if it's screwed into sheet rock. We recommend at least 10 clips for a 2' x 6' panel..
  • 20 mounting brackets are included in this order..
Check Stock

Roman Shade Wall L Bracket and Wingnut Ceiling or Wall Mount Brackets Mounting Installation L-Brackets for Roman Shade Home Window Drapery Use (4)

  • Sufficient for replacement: you will get totally 4 pieces (2 sets) roman shade wall l brackets in one package, enough quantity for meeting your daily demands.
  • Size information: the wingnut ceiling or wall mount bracket measures approx. 1.8 inch in length, 1.3 inch in height and inch in 0.9 width, Please measure carefully to make sure brackets will work with your shades.
  • Ceiling or wall mount: l-brackets mounting can fit roman shades and other similar window treatments, allowing for the easy wall or ceiling mount.
  • Wingnut operation allows for easy adjustments for a nice installation.
  • Easy installation: you just need to simply mount the window shade mounting bracket on the wall and hang your curtains.
  • It is recommended to remove the old shade and make sure to wipe them clean before installing the bracket.
  • Sturdy and reliable: the wall mount brackets are made of iron material, so they are durable, sturdy, not easy to break or deform that can last for a long time use, fitting for both wall and ceiling installation.
Check Stock

Roman Shade Wall L Bracket and Wingnut Ceiling or Wall Mount Brackets Mounting Installation L-Brackets for Roman Shade Home Window Drapery Use (8)

  • Sufficient for replacement: you will get totally 8 pieces (4 sets) roman shade wall l brackets in one package, enough quantity for meeting your daily demands.
  • Size information: the wingnut ceiling or wall mount bracket measures approx. 1.8 inch in length, 1.3 inch in height and inch in 0.9 width, Please measure carefully to make sure brackets will work with your shades.
  • Ceiling or wall mount: l-brackets mounting can fit roman shades and other similar window treatments, allowing for the easy wall or ceiling mount.
  • Wingnut operation allows for easy adjustments for a nice installation.
  • Easy installation: you just need to simply mount the window shade mounting bracket on the wall and hang your curtains.
  • It is recommended to remove the old shade and make sure to wipe them clean before installing the bracket.
  • Sturdy and reliable: the wall mount brackets are made of iron material, so they are durable, sturdy, not easy to break or deform that can last for a long time use, fitting for both wall and ceiling installation.
Check Stock

KES 14-Inch Bathroom Tempered Glass Shelf 8MM-Thick Wall Mount Rectangular, Brushed Nickel Bracket, BGS3202S35-2

  • EXTRA-THICK (0.3 INCH) TEMPERED GLASS (CLEAR) - Safe use & kid-friendly. When broken, it crumbles into small granular chunks instead of splintering into jagged shards as plate glass does, less likely to cause injury..
  • Brackets are constructed of zinc alloy ensuring durability and dependability..
  • Dimensions: The mounting distance between two brackets is suggested to be 220 mm, not exceeding 330 mm. The distance from brackets to the wall is about 5 mm, enable the cables of electric toothbrush to pass through..
  • Max load: 11 lbs for screw mounting on solid concrete wall..
  • ALL HARDWARE & INSTRUCTIONS INCLUDED: You can find detailed installation instructions from product pictures. You can contact KES for step by step guide if you need any help. 8MM- thick tempered glass, rust proof metal bracket (zinc alloy) and wall-mounting 304 stainless steel CONCEALED screws are all included, no need to purchase extra hardware..
Check Stock

JunSun Recessed Toilet Paper Holder Brushed Nickel Stainless Steel Toilet Paper Roll Holder Tissue Holder Modern Tissue Roll Holder 6 X 6 Square Jumbo Mega Roll Holder Rear Mounting Bracket Included

  • 100% STAINLESS STEEL CONSTRUCTION-Compared with other similar products which is constructed of zinc and aluminum with plastic brackets &bar, our product is 100% 304 stainless steel, including the main body, brackets and bar, even the rear mounting bracket. Stainless steel construction provides long-lasting durability, also it can protect against corrosion & rust..
  • BRUSHED NICKEL FINISH-Hand brushed nickel finish, including the main body, brackets and bar, even the rear mounting bracket. Ensuring every detail of the product is perfect, building to resist daily scratches, corrosion and tarnishing..
  • MULTI-USE - It can be mounted to a hollow wooden wall or wooden bathroom cabinet (hardware & rear mounting bracket included), also can be mounted to a solid cement wall (hardware included)..
  • EASY INSTALLATION - Complete with all the mounting accessories needed, including premium stainless steel screws, top quality anchors and rear mounting bracket..
  • DIMENSIONS- 6.1" x 6.1" x 3.58" inches, requires a 5-inch by 5-inch hole in the wall..
Check Stock

Bedycoon Black Mounting Wall Bracket Compatible with Bose WB-300 Sound Touch 300 Soundbar Soundbar 500 Soundbar 700 Soundbar 900 Speaker

  • Wall Bracket for bose Sound Touch 300 sound bar Soundbar 500 Soundbar 700 Soundbar 900 (CAN NOT FIT OTHERS).
  • Wall brackets are good look and elegant ,made from high quality durable stainless steel material.180 Days Warranty..
  • Special designed brackets for bose sound touch 300 sound bar Soundbar 500 Soundbar 700 bring music, movies and TV to you.Replace for bose soundbar 500 mounting bracket and for bose soundbar 700 mounting bracket..
  • All necessary hardware and instructions are included..
  • This is replacement brackets , not original brackets , please kindly note before purchase.The name and logo for bose are the registered trademark of the respective owner..
Check Stock

Wall Bracket for Gridwall - Use to Mount Wire Grid to Wall BLACK Lot of 50 NEW

  • Use our gridwall mounting clips to easily mount & secure your grid panels flush against your wall. Our mounting brackets come in a black finish and will hold grid panels with up to 1/4" thick wire..
  • Simply place the grid against the wall, secure the bracket across the wire & screw it into the wall. The bracket mounts have a small half circle loop that goes over the wire. No screws are included..
  • They measure .5" H x .78" L and have a 1/5" diameter hole so you can easily screw the panel into your wall..
  • NOTE: These clips need to be screwed directly into the stud of your wall. They may not securely hold your panel if it's screwed into sheet rock. We recommend at least 10 clips for a 2' x 6' panel..
  • 20 mounting brackets are included in this order..
Check Stock