Top Wall Mount 19 Inch Rack Reviews

StarTech.com 2U Vertical Wall Mount Patch Panel Bracket - Steel Rack Mount Bracket w/Hardware for 19

  • VERSATILE FUNCTIONALITY: This multi-use 2U vertical patch panel bracket enables you to mount your server, data, networking or AV equipment vertically on a wall or horizontally under a desk for added versatility..
  • STURDY DESIGN: Constructed to EIA-310 19in rack standards, the black wall mount patch panel bracket features a solid steel design for ultimate durability. The rack can hold up to 125.3lb (56.7kg) to ensure your equipment is secure..
  • NO ASSEMBLY REQUIRED: The open frame, L-shaped rack arrives fully assembled with cage screws for mounting equipment and 1 ½” screws for mounting the rack to wood surfaces. It’s a convenient solution for all your SoHo (small office/home office) rack needs..
  • STANDARDIZED HOLE SIZING: The wall mounting holes on the 2U vertical mountable rack bracket are 16” center to center to provide greater stability and match standard wall studs. It works with most 19” rack mountable equipment for ultimate compatibility..
  • INDUSTRY-LEADING SUPPORT: StarTech.com offers a lifetime warranty and free lifetime technical support on this wall mount patch panel bracket, and has been the choice of IT professionals and businesses for over 30 years..
Check Stock

BTU Power Strip Surge Protector Rack-Mount PDU 12 Right Angle Outlets Wide-Spaced Heavy Duty 1U Rack Mount PDU Power Strip for Server Racks 15A/125V 6ft Cord Black

  • Rack Mount Power Strip: This PDU power strip equipped 12 wide space outlets (1.3inch), providing enough space between the sockets to large plugs. 12....
  • Metal Wall Mount Power Strip: Equipped 4 screws to help mount and provided several mount way, you can release the screws on both sides and rotate the....
  • 1U Rack Design: 19 inch power strip compatible with all 19” server racks. The PDU power strip surge protector designed for rack enclosure, garage,....
  • Surge Protector: Covered ON/OFF switch, built-in 15A circuit breaker, surge protector designed, it will automatically cut power to protect connected....
  • Warranty: 12-month warranty. If you have any problem, please contact us without hesitate, we will solve this problem for you within 24 hours..
Check Stock

Patch Panel Mini 12 Port Cat6A with Inline Keystone 10G Support, Rapink Coupler Patch Panel STP Shielded 10-Inch with Removable Back Bar, 1U Network Patch Panel for Cat7, Cat6, Cat6A, Cat5e Cabling

  • 【10G speed via Gold plated pins】 All 8P8C of rj45 jack panel keystone are golden plated to support better network connection up to 10G speed Ethernet network. This is a well made keystone panel and can be used as cat7 patch panel to upgrade cat7 network..
  • 【Detachable back bar included】This patch panel wall mount contains thick steel detachable back bar. With zip ties, it can effectively reduce the deformation of the ethernet cable, improve the working stability of the network connection port, and avoid keystone loose and the occurrence of network failures caused by the loosening and deformation of the cable. What you get?12 pcs sturdy cat6a coupler keystone loaded patch panel wall mount, removable cable back bar, screws, tie wraps..
Check Stock

UCTRONICS Ultimate 1U Rackmount for Raspberry Pi 4B

  • You will be getting: 1 pcs 19” 1U Ultimate Rack.
  • Designed for Raspberry Pi 4: The 19-inch rackmount is specifically to house Raspberry Pi 4 boards, supports up to 4 units. Each slot can mount an RPi 4 board with a rerouting board, 0.91-inch OLED, and a power switch (You can search for ASIN: B091GFZZDS to get them)..
  • Standard 1U Size: 19"×1.75"(482.6×44.5mm). The rack fully compatible with 19’’ server racks, had no issue plugging this into the 1U rack space..
  • High Quality Built: The rack is made of sturdy carbon steel, matte black powder coat finish, has nothing breaking off, paint chips, sharp exposed edges (plate corners are rounded off smooth)..
  • Application: The Ultimate rack is your perfect solution for mounting your RPi 4, network, audio-video, and other non-rack mount equipment..
Check Stock

JINGCHENGMEI 3U 125 lb Weight Capacity Heavy Duty 19 Inches Steel Vertical Patch Panel Mounting Bracket for Networking Equipment (MFT-HVWRF3U)

  • STANDARDIZED HOLE SIZING: The mounting holes on the wall rack mount are 16 inches center to center for greater stability, and mounting to standard wall studs.
  • DURABILITY: Constructed to EIA-310 19in rack standards, the wall mount data rack features a solid steel design for ultimate durability. Max weight loading capacity: 125 pounds..
  • NO ASSEMBLY REQUIRED: For added convenience, this wall mount patch panel bracket arrives fully assembled with cage screws and nuts for mounting equipment..
  • VERSATILE FUNCTIONALITY: This multi-use patch panel mounting bracket enables you to mount your server or networking equipment vertically on a wall or horizontally under a desk for added versatility.
  • ENVIRONMENTALLY FRIENDLY: this foldable rack is at less volume, lower freight charge, smaller packaging. Easy to carry..
Check Stock

Rack Mount Power Strips, 1U Rack Mount PDU Power Strip Surge Protector for 19″ Standard Rack, 8 Outlets Wide-Spaced, 15A/125V, 160 Joules, 6FT Cord

  • 【Rack Power Surge Protector】: 15A/125V AC, Built-in circuit breaker and 160 Joules surge protector, safety feature to cover the power switch, 6FT durable cable..
  • 【1U Power Strip, Rack PDU】: Exact 1U height design, suitbale for for standard 19 inch racks, home rack, 24u rack, video equipment rack, DJ rack, media room, server cabinet, networking center..
  • 【8 Right Angled Outlet, 1.6 inch Wide Spaced 】: 8 AC Outlet, hold multiple devices at once, you can attach it to home rack. 1.6 inch wide spaced outlet allow brick power adapters go across vertically and don’t block the other outlets..
  • 【Detachable Mounting Ears,180° Flipped 】: Mount brackets support detachable and 180° Flipped, so that the power strip not only rack-mounted but also surface-mounted. You can install it where you want..
  • 【Sturdy and Easy to Mount】: came with rack nuts, screws and washers, 1U rack-mount metal PDU power strip, perfect for standard 19 inch rack and cabinet..
Check Stock

Allen & Heath QU-16-RK19 Rack Mount Kit for QU-16 Digital Mixer, 19-Inch

  • 19-inch rack ear kit, Minimum rack space required is 11U.
  • Mounts in a standard 19-inch rack or flight case. Minimum rack space required is 11U. Note - Allow space for the connectors and cables at the rear..
Check Stock

StarTech.com 4U Wall Mount Network Rack - 14 Inch Deep (Low Profile) - 19\ Patch Panel Bracket for Shallow Server and IT Equipment, Network Switches - 44lbs/20kg Weight Capacity, Black (WALLMOUNT4)

  • 4U WALL MOUNT RACK: This 19 inch wide low profile wall mounted rack has a maximum mounting depth of 14 in [35 cm], recommended for networking equipment up to 12in deep, leaving 2in for cable routing.
  • maximum weight capacity of 44 lbs [20kg].
  • EASY TO INSTALL: The 4U wall mounting patch panel bracket ships fully assembled and comes complete with M6 Screws and M6 Cage Nuts for easier equipment installation, to save you the hassle of sourcing separate mounting hardware.
  • COLD-ROLLED STEEL CONSTRUCTION: The wall mounting data rack features a solid steel design for ultimate durability and to ensure a safe and sturdy mounting solution & includes wall mounting hardware.
  • Installs onto 16" studs with mounting holes.
  • EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room, wiring closet, classroom.
Check Stock

RIVECO 2U Wall Mount Rack for Network| Reinforced Heavy Load 66-99 LBS Small Server Racks Vertical & Horizontal Mounting for 19 inches IT & Studio Equipment.

  • VERSATILE: This folding open rack fits 19-inch standard width equipment for network router, server, NAS, data, audio device. Vertical & horizontal mountable, compact design for limited space application as a network rack, audio rack, NAS rack, AV server rack, or even power equipment shelf. Size range 2U, 3U, 4U, 6U are to meet most applications..
  • STURDY & HEAVY LOAD: Using qualified 2.0mm thick cold rolled steel & 0.2mm powder coating and reinforced back plate, created outstanding torsion resistance & heavy load. This open frame bracket has strengthened structure & increased height, max load can support up to 66-99 LBS..
  • ACCESSORIES: Comes with all the hardware required to install, including 8 set M6 screws & cage nuts, 4 set M5 rack screws, 4 wall mounting bolts..
  • QUICK & EASY INSTALLATION: With detailed instruction, it takes several minutes to get a fully functional wall mount network rack..
  • 3 YEARS WARRANTY:Lifetime technical supports, 100 thousand application cases every year..
Check Stock

Allen Tel Products AT55HM-3 3.5-Inch Height, 2 Rack Units Hinged Wall Mount Bracket

  • 19-Inch wall mount hinged brackets, 6-Inch depth.
Check Stock

Tripp Lite - SRW12US 12U Wall Mount Rack Enclosure Server Cabinet, Hinged, 20.5

  • Unit Dimensions: 23.63" W x 21.6" D x 25" H | Weight: 60 lbs.
  • Wall-mount cabinet secures and organizes 12U of 19-inch rack equipment up to 20.5 inches deep in locations with limited floor space.
  • Swings away from wall on hinge for Easy back door access.
  • Mounts to wall or rolls on floor(with optional Srcaster).
Check Stock

Eforlife Sword Holder Wall Mount Samurai Sword Display Stand Katana Wakizashi Tanto Genji Sword Rack Hanger 1-Tier

  • Designed for general swords such as Katana, Wakizashi, Tanto, Genji, etc..
  • Color: All black. Material: Compressed wood. Decent wall mount stand rack for your swords display..
  • Size: 35x19.5 cm / 13.7x7.6 inch (L*H). You can display your samurai sword which is longer than 13.7 inch..
  • One layer. Two holes in the back to support it on the wall. Very sturdy once you placed it on the wall..
  • Package Content: 1x Sword Holder and mounting accessories for assembly..
Check Stock

Quilting Wooden Ruler Rack with Spool Holder and Space to Store Pins Tacks Bobbins (7'' x19'')

  • KEEP YOUR QUILTING RULERS ORGANIZED - This wooden quilter's ruler rack by Weishidai keeps all of your rulers - larger and small - handy and out of your work space. You never have to search for your rulers again with this great quilt ruler holder. It will keep your rulers organized and within reach when needed. The rack is wooden and has eight horizontal slots to store rulers upright and visible. It measures 19 in Long x 7 in Wide x 0.95 in Thick..
  • PROTECT YOUR RULERS - You paid a premium for all of your quilting rulers and templates, the Weishidai quilting ruler rack helps to protect your investment by keeping all of your rulers separated, thus reduced the chance of surface scratches..
  • BONUS THREAD SPOOL HOLDER - 6 thread spool pegs helps to keep your favorite threads handy..
  • WALL MOUNTABLE - Easily convert this ruler rack to wall mount version to save even more space. Wall mount hardware (2 hangers and 2 screws) included with every ruler rack..
Check Stock