EGW Glock Sight Mount For the Docter, Burris Fastfire, Vortex Venom & Viper
- Fits: Docter, Burris Fastfire, Vortex Venom, Vortex Viper.
Top Vortex Venom On Glocks Reviews
Optic Mounting Plate for Glock(Non-MOS/Aftermarket Slide),Taurus GX4,G3C,Canik TP9SA-Compatible with ADE Stingray,Riton X3 Tactix PRD,Trijicon RMR/SRO,Swampox Kingslayer/Liberty/Justice red dot Sight
- ...work, such as Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight. We recommend get the right size screws from a local hardware store..
- The footprint of this plate is NOT compatible with other footprints. This plate does NOT fit other red dots such as Vortex Venom/Viper, Doctor, Burris Fastfire, Shield RMS/RMSc, Trijicon RMRcc, Deltapoint Pro, Swapfox sentinel, ADE Spike..
Outerimpact Red Dot Adapter Mount Compatible with Smith & Wesson SD9VE and SD40VE
- Compatible Red Dot Sights (Mounting Screws INCLUDED): Trijicon RMR, Doctor, Insight MRDS, Eotech MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 & 3, CMORE RTS & STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS (additional screw purchase required), Holosun 407/507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1252.
- Compatible Guns: S&W SD9VE and S&W SD40VE.
- Dimensions: Length: 2.02' Width: 1.0' Thickness: 0.13'.
Picatinny Rail Mount plate for Glock 17 19 22 Taurus G3C-Work with All railed red dot such as Vortex Venom, Doctor, Trijicon RMR, comes with builtin screw hole for Sig Romeo Zero, Holosun 407k/507k
- ...k that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
- This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to attach to this picatinny rail mount right away. Please NOTE: Some red dots such as holosun, Trijicon RMR do NOT come with the picatinny plate, user need to buy..
- This picatinny rail plate also have two built-in screw hole for red dot with Shield RMS/RMSc footprint and holosun 407k/507k footprint to fit directly on the plate without needing a picatinny plate. Red dots sharing these footprint such as Shield RMSc, Trijicon RMR and Deltapoint Pro have the choices to mount directly on this picatinny rail, or using a picatinny plate(sold separately)..
ADE Zantitium RD3-015 Red Dot Sight + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS,Non-Aftermarket Slide) Standard, Canik TP9SF and Taurus GX4/G3C/G3 with Factory Steel Sight Pistol
- ...vetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
- Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
- New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Battery(Included).Promotes rapid target acquisition while providing a precise point of aim.
- getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo..
- 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision.
ADE Bertrillium RD3-013 Red Dot+Rear Sight Optic Mounting Plate/Adapter for All GLOCK (Non-MOS,Non-Aftermarket Slide) Standard models,Canik TP9SF and Taurus GX4,G3C&G3 with factory steel sights pistol
- ...e recommend hiring a professional gunsmith.
- New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included)Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
- Promotes rapid target acquisition while providing a precise point of aim.
- getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo..
- 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision.
Ade Advanced Optics RD3-006A Green Dot Micro Mini Reflex Sight for Handgun
- Fully windage and elevation adjustable and lockable.
- Unlimited Eye Relief. Multi Illumination Settings. Powered by a lithium CR2032 battery(Included).It is also compatible with varies handgun mounting plates that replace rear sight dovetail..
- This Huracan Green Dot Sight fits directly to Optics Ready pistols that does not need to remove rear sight such as Glock MOS, Springfield OSP. It also fits Canik using Canik provided mount marked for Doctor/Venom type red dot..
- However the front switch of the sight needs to trim down 2mm depends on exact pistol model if the pistol’s pre-cut is very short...
- Comes with an removable picatinny mounting base to attach to any thing with piatinny rail. Fully windage and elevation adjustable and lockable.
- Unlimited Eye Relief. Powered by a lithium CR2032 battery.
- ADE RD3 006,RD3 009,RD3 012,RD3 013,RD3 015 are designed to fit the slide/footprint of plate made for Vortex Venom,Burris Fastfire,Meopta,Docter,Insight,Eotech MRDS.Any Plate made for those brands also fits this sight..
Multiplied by the 5400 Vector of the Sphinx
- Fits Vector Optics Sphinx Red Dot Sight or Green Dot Sight, Vortex Venom, Burris FastFire.
- Installation Effect as Following Pictures Shown (price without sight).
UTG Super Slim RDM20 Mount for Rear Sight Dovetail, Glock
- Compatible with Glock vortex venom viper burris fastfire ade *NOT FIT Counterfeit sights.
- Ultra Low Profile and lightweight, Easy to install.One Piece Design for a Secure Zero Hold..
- 30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount..
- Precision CNC Machined from 7075T6 Aluminum with Black anodized finish..
- 100% MONEY-BACK warranty within 30 days of purchase * NO QUESTIONS ASKED. 7X24 quick response technical support.LIFETIME WARRANTY.
TRUGLO Dot Optic Mount for Shotguns Universal Rib Mount 4-Post Mount TG8954
- Compatible with TRUGLO TRU-TEC Micro, Vortex Venom, Burris Fastfire, EOTech MRDS, Meopta Meosight series, and Docter optics and other compatible....
- Mount a dot-optic to your shotgun's ventilated rib.
- Fits ventilated ribs, . 236 in. (6mm) to . 395 in. (10mm) rib widths.
- Optic stays with the barrel and maintains zero when changing barrels for different seasons.
Optic Base Mount Plate for Taurus PT111 Millennium G2 G2c G2s Original G3 Vortex Viper Venom ADE Docter Noblex Red Dot Sight Black
- The Optic Mount Plate for the PT111 G2, Millennium G2, G2, G2c, G2s, and original G3, or TX22 pistols.
- Made from aircraft grade aluminum and then hard anodized to mil spec for longevity and scratch resistance.
- Designed to replace your rear sight, no milling of the slide required No gunsmithing required for this mounting plate.
- Will work withJPoint, Shield Sight Reflex Mini Sight, Vortex Viper, Vortex Venom, ADE RD3 003, ADE RD3-006A, ADE RD3-006B, Docter/Noblex Sight C,....
- Includes the Optic Mount Plate Installation hardware and tools.
Full Auto Ruger 10/22
- Comes with an optic adapter/mounting plate to connect red dot sight to Ruger 10/22 and also a standard picatinny mount..
- The red dot is designed to fit the slide/footprint on the cut made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight..
- Fully windage and elevation adjustable and lockable.
- Unlimited Eye Relief. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
- Waterproof/Shockproof/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..
- This red dot comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP,.
Vortex Optics Razor HD Spotting Scope 22-48x65 Angled
- Pistol mount plate fits GLOCK 17 19 22 23 26 27 34..
- Fits Vortex Viper/Venom micro red dot sight.
- Fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a, fits Sightmark mini shot reflex sight.
- Fits Burris Fastfire micro red dot sight(Notes: the screws included in the package are not long enough for some Burris red dot sights, you can use the....
- WO WOLTIS,Caution: NOT fit RMR, RMS, Doctor..